Product Showcase
Laney IRT120H Ironheart Guitar Amplifier Head
Original price was: ₹132,000.00.₹75,000.00Current price is: ₹75,000.00.
Laney IRT120H Ironheart Guitar Amplifier Head Specifications:
- Power RMS: 120 watts RMS
- Inputs: 1 x Jack
- Channels: 3 – Clean, Rhythm & Lead
- Equalisation: Bass, Middle & Treble with Pull-Push EQ shift on each
- Master Presence Control: Overall Tone
- Boost Switch: Footswitchable Pre Boost
- Preamp Valves: 4 x ECC83
- Output Valves: 4 x 6L6
- Class: Class AB
- Reverb: Laney designed Digital reverb
- Footswitch: FS4-IRT supplied as standard – switches Channel, Clean, Reverb & Pre Boost
- Speaker connections: 2 jack sockets – 4, 8 or 16 Ohms
- FX Loop: Yes – variable level FX loop
- Weight: 20Kg Unit Weight (24kg) Shipping
- Dimensions (W x H x D): 678 x 271 x 288 mm.
Laney IRT120H Ironheart Guitar Amplifier Head.
Producing 120 watts RMS of all ECC83 & 6L6 valve tone the Laney IRT120H possess masses of gain and like its metal relatives such as the Laney KLIPP and the Laney AOR hits you hard between the eyes like a power hammer from hell!
The Laney IRT120H preamp houses three channels: – Clean, Rhythm & Lead all with independent level controls. The Clean and the Rhythm channels share a 3- band EQ with pull-push shift features on each control that gives you total control over your sound allowing you to dial in that killer tone. The Lead channel has an independent 3- band EQ with pull-push shift features on each control allowing for some radical lead tones.
Everyone has a favorite boost pedal you always seem to end up putting in front of your amp well leave it at home! One great feature on the Laney IRONHEART is the Pre Boost feature. This works just like kicking in your favourite boost pedal right before your amp. It’s available where ever you are on the pre amp and can be switched in or out via the supplied footswitch.
A standout feature of the Laney IRONHEART range is the WATTS control in the master section. This allows you to really screw down the output of the IRONHEART’s 4 x 6L6 output section, down to less than 1 watt! Great for getting the sound of a full -blown metal head at bedroom levels.
Combine this with a Dynamics control which tightens up you low end when you’re playing a full power and you have a great metal tone at whatever level you decide to play at.
The Tone control works really effectively and allows you to make quick adjustments to your overall sound should you for example change guitars.
The Laney IRT120H features a custom designed and specifically tuned reverb allowing you to add just the right amount of reverb wash over your tone. Adding additional effects via external processors is a breeze the FX loop on the rear of the Laney IRT120H has a switchable level control meaning you can easily switch your FX loop output level to match the ideal level for your effects gear.
The IRT120H’s simple pre amp layout means you can easily dial your perfect tone.
Every Laney IRT120H is supplied with dedicated footswitch, which enables you to switch Pre Boost, channels and reverb without having to use the front panel.
There is no doubt that IRONHEART is a serious metal amp and much more.
You must be logged in to post a review.
Related products
-
ART HEADAMP 6 PRO 6-Channel Headphone Amplifier
Original price was: ₹30,575.00.₹29,500.00Current price is: ₹29,500.00.Add to cartSpecifications
Inputs XLR, 1/4″ Outputs XLR, 1/4″ Input Impedance 40K Ω Main, 10K Ω Direct, 15K Ω Aux In Output Impedance <12 ΩHeadphones Maximum Input Level +21 dBu Maximum Output Level 150mW (600 Ω Headphones) 500mW (32 Ω Headphones) 150mW (8 Ω Headphone Maximum Gain 22 dB Total Harmonic Distortion <.01% Typical Signal to Noise Ratio >90dB Typical CMRR >40 dB Power Requirements 120 VAC / 50-60 Hz, or 230 VAC / 50 Hz, 15 W Dimensions (LWH) 6″ x 19″ x 1.75″, 15.2 cm x 48.3 x 4.45 Weight 5.3 lbs. (2.4kg) -
Behringer Microamp HA400 Ultra-Compact 4 Channel Stereo Headphone Amplifier
Original price was: ₹6,367.00.₹4,800.00Current price is: ₹4,800.00.Read moreCategory
Specification
Type
4-Channel Stereo Headphone Amplifier
Input
1 × ¼″ TRS stereo jack
Input Impedance
100 kΩ
Max Input Level
+15 dBu
Outputs
4 × ¼″ TRS headphone jacks
Output Impedance
~80 Ω
Output Power
~40 mW per channel into 100 Ω
Frequency Response
20 Hz – 20 kHz
THD (Total Harmonic Distortion)
< 0.005%
SNR (Signal-to-Noise Ratio)
> 90 dB
Amplifier Type
4580 operational amplifiers (low noise)
Volume Controls
Independent level control for each output
Power Supply
External 12 V DC adapter (150 mA, included)
Power Type
Passive unit (powered only via adapter)
Chassis Material
Metal
Dimensions (W × H × D)
104 × 57 × 47 mm (4.1” × 2.2” × 1.8”)
Weight
~0.37 kg (0.8 lbs)
Warranty
3 Years (Manufacturer Warranty)
-
Behringer Powerplay P1 Personal In-Ear Monitor Amplifier
Original price was: ₹16,515.00.₹8,500.00Current price is: ₹8,500.00.Read moreCategory
Specification
Type
Personal in-ear monitor (IEM) amplifier
Inputs
2 × balanced XLR (mono/stereo)
Main Controls
Volume (level) knob, Balance/Mix knob (dual-channel mixing)
Output
3.5 mm (1/8″) headphone jack
Input Impedance
20 kΩ
Output Impedance
10 Ω per channel
Frequency Response
20 Hz – 80 kHz (±0.5 dB)
THD + N
0.01 %
Signal-to-Noise Ratio
> 90 dB (A‑weighted)
CMRR
> 50 dB
Crosstalk
> 40 dB
Normal Input Level
+2 dBu
Max Input Level
+6 dBu
Limiter Threshold
+7 dBu
Max Output Level
+9.5 dBu
Limiter
Built-in current limiter
Power Supply
9 V battery (alkaline or rechargeable) or optional 9 V DC adapter
Battery Life
Up to 12 hours (9 V battery)
Standby Power Consumption
300 mW
Max Operating Current
90 mA
Max Output Power
40 mW per channel into 20 Ω
Indicators
Power and battery status LEDs (green/red)
Chassis & Mounting
Rugged metal housing, belt clip, mic-stand mountable (5/8″ & 3/8″)
Dimensions (H × W × D)
45 × 125 × 85 mm (1.8″ × 4.9″ × 3.3″)
Weight
0.27 kg (0.6 lb)
-
Behringer Ultra-DI DI100 Direct Box
Original price was: ₹10,198.00.₹6,700.00Current price is: ₹6,700.00.Read moreCategory
Specification
Type
Active DI box
Channels
1
Frequency Response
10 Hz – 93 kHz
Noise Level
–110 dBu
THD + N (@1 kHz/0 dBu)
< 0.005 %
Input Impedance
> 250 kΩ
Load Impedance
> 600 Ω
Max Input Level
+10 / +30 / +50 dBu (via switchable pads)
Pads
Switchable -20 dB each (–20 dB & –40 dB total)
Ground Lift
Yes
Inputs
1× unbalanced ¼″ jack (in/link out), 1× unbalanced XLR
Outputs
1× balanced XLR out, 1× ¼″ link out
Power Supply
Phantom power 18–48 V DC or 9 V battery (auto-switching, battery off when phantom present)
Special Features
OT-1 output transformer, handles up to 3,000 W speaker-level input, rugged aluminum case, battery auto-off when phantom power applied
Dimensions
150 × 130 × 60 mm (≈5.91″ × 5.12″ × 2.36″)
Weight
~650 g
Reviews
There are no reviews yet.