Product Showcase
Laney IRT120H Ironheart Guitar Amplifier Head
Original price was: ₹132,000.00.₹75,000.00Current price is: ₹75,000.00.
Laney IRT120H Ironheart Guitar Amplifier Head Specifications:
- Power RMS: 120 watts RMS
- Inputs: 1 x Jack
- Channels: 3 – Clean, Rhythm & Lead
- Equalisation: Bass, Middle & Treble with Pull-Push EQ shift on each
- Master Presence Control: Overall Tone
- Boost Switch: Footswitchable Pre Boost
- Preamp Valves: 4 x ECC83
- Output Valves: 4 x 6L6
- Class: Class AB
- Reverb: Laney designed Digital reverb
- Footswitch: FS4-IRT supplied as standard – switches Channel, Clean, Reverb & Pre Boost
- Speaker connections: 2 jack sockets – 4, 8 or 16 Ohms
- FX Loop: Yes – variable level FX loop
- Weight: 20Kg Unit Weight (24kg) Shipping
- Dimensions (W x H x D): 678 x 271 x 288 mm.
Laney IRT120H Ironheart Guitar Amplifier Head.
Producing 120 watts RMS of all ECC83 & 6L6 valve tone the Laney IRT120H possess masses of gain and like its metal relatives such as the Laney KLIPP and the Laney AOR hits you hard between the eyes like a power hammer from hell!
The Laney IRT120H preamp houses three channels: – Clean, Rhythm & Lead all with independent level controls. The Clean and the Rhythm channels share a 3- band EQ with pull-push shift features on each control that gives you total control over your sound allowing you to dial in that killer tone. The Lead channel has an independent 3- band EQ with pull-push shift features on each control allowing for some radical lead tones.
Everyone has a favorite boost pedal you always seem to end up putting in front of your amp well leave it at home! One great feature on the Laney IRONHEART is the Pre Boost feature. This works just like kicking in your favourite boost pedal right before your amp. It’s available where ever you are on the pre amp and can be switched in or out via the supplied footswitch.
A standout feature of the Laney IRONHEART range is the WATTS control in the master section. This allows you to really screw down the output of the IRONHEART’s 4 x 6L6 output section, down to less than 1 watt! Great for getting the sound of a full -blown metal head at bedroom levels.
Combine this with a Dynamics control which tightens up you low end when you’re playing a full power and you have a great metal tone at whatever level you decide to play at.
The Tone control works really effectively and allows you to make quick adjustments to your overall sound should you for example change guitars.
The Laney IRT120H features a custom designed and specifically tuned reverb allowing you to add just the right amount of reverb wash over your tone. Adding additional effects via external processors is a breeze the FX loop on the rear of the Laney IRT120H has a switchable level control meaning you can easily switch your FX loop output level to match the ideal level for your effects gear.
The IRT120H’s simple pre amp layout means you can easily dial your perfect tone.
Every Laney IRT120H is supplied with dedicated footswitch, which enables you to switch Pre Boost, channels and reverb without having to use the front panel.
There is no doubt that IRONHEART is a serious metal amp and much more.
You must be logged in to post a review.
Related products
-
Behringer HA8000 V2 8-Channel Headphone Mixing/Distribution Amplifier
Original price was: ₹38,444.00.₹20,000.00Current price is: ₹20,000.00.Add to cartCategory
Specification
Type
8‑channel headphone mixing/distribution amplifier (1 U rack)
Amplifier Channels
8 independent high‑power stereo amplifiers, each with level control and LED meter
Main Inputs
2 × stereo (Main In 1 & 2), ¼″ TRS, servo-balanced
Main Input Impedance
Balanced: 40 kΩ; Unbalanced: 20 kΩ
Max Main Input Level
+16 dBu (some sources list +22 dBu)
Direct Inputs
8 × independent ¼″ TRS (one per channel)
Direct Input Impedance
~15 kΩ
Phone Outputs
16 × ¼″ TRS (8 front, 8 rear), dual per channel
Max Output Level
+24 dBm into 100 Ω, +19 dBm into 8 Ω
Minimum Load Impedance
8 Ω
Frequency Response
10 Hz – 150 kHz, ±3 dB
Dynamic Range
~101–103 dB (22 Hz–22 kHz)
Signal‑to‑Noise Ratio
> 87 dB or > 90 dB depending on spec
THD + N
~0.006–0.007 % @ +4 dBu, 1 kHz
Controls (per channel)
Output level knob, Main In 1/2 select, Mono/Stereo switch, 8-digit LED meter
Master Controls
Two Main Input level dials, 5-segment Input LED meter
Power Supply
“Planet Earth” switching supply (100–240 V AC autorange), draws ~35 W
Dimensions (H×W×D)
44 × 483 × 149 mm (1.75″ × 19″ × 5.9″)
Weight
~1.9 kg (4.2 lb)
Warranty
3 years (varies by region)
-
ART Digital MPA-II 2-Channel Tube Preamp with Digital Connectivity
Original price was: ₹66,435.00.₹51,000.00Current price is: ₹51,000.00.Add to cartSpecifications
Input Impedance 150-3000 (Omega) Adjustable (XLR), >800k (Omega) (Instrument) Output Impedance < 47 (Omega) (XLR) Maximum Input Level +19 dBu (Cannon) Maximum Output Level +27 dBu (XLR) Maximum Gain 75 dB Frequency Response 15 Hz to 48 kHz (+0, -1 dB) @ Normal Plate Voltage 15 Hz to 120 kHz (+0, -1 dB) @ High Plate Voltage Total Harmonic Distortion <0.005% (Typical) Equivalent Input Noise -129 dBu (XLR, “A” Weighted) CMRR >90dB Power Requirements USA – 105 to 125 VAC / 60 Hz Export Units Configured forCcountry of Destination -
Behringer MICROMIX MX400 Ultra Low-Noise 4-Channel Line Mixer
₹5,783.00Read moreBAJAAO INDIA presents the Behringer MICROMIX MX400 4-channel Line Mixer. The mixer is big on features despite its ultra-compact size. The MX400 yields the highest sonic quality at all output levels, boasting ultra low-noise 4580 operational amplifiers for outstanding audio performance. These are the same op amps found in its much bigger brethren. Expanding on …
Behringer MICROMIX MX400 Ultra Low-Noise 4-Channel Line MixerRead More
-
ART HEADAMP 6 PRO 6-Channel Headphone Amplifier
Original price was: ₹30,575.00.₹29,500.00Current price is: ₹29,500.00.Add to cartSpecifications
Inputs XLR, 1/4″ Outputs XLR, 1/4″ Input Impedance 40K Ω Main, 10K Ω Direct, 15K Ω Aux In Output Impedance <12 ΩHeadphones Maximum Input Level +21 dBu Maximum Output Level 150mW (600 Ω Headphones) 500mW (32 Ω Headphones) 150mW (8 Ω Headphone Maximum Gain 22 dB Total Harmonic Distortion <.01% Typical Signal to Noise Ratio >90dB Typical CMRR >40 dB Power Requirements 120 VAC / 50-60 Hz, or 230 VAC / 50 Hz, 15 W Dimensions (LWH) 6″ x 19″ x 1.75″, 15.2 cm x 48.3 x 4.45 Weight 5.3 lbs. (2.4kg)
Reviews
There are no reviews yet.