Product Showcase
Laney IRT120H Ironheart Guitar Amplifier Head
Original price was: ₹132,000.00.₹75,000.00Current price is: ₹75,000.00.
Laney IRT120H Ironheart Guitar Amplifier Head Specifications:
- Power RMS: 120 watts RMS
- Inputs: 1 x Jack
- Channels: 3 – Clean, Rhythm & Lead
- Equalisation: Bass, Middle & Treble with Pull-Push EQ shift on each
- Master Presence Control: Overall Tone
- Boost Switch: Footswitchable Pre Boost
- Preamp Valves: 4 x ECC83
- Output Valves: 4 x 6L6
- Class: Class AB
- Reverb: Laney designed Digital reverb
- Footswitch: FS4-IRT supplied as standard – switches Channel, Clean, Reverb & Pre Boost
- Speaker connections: 2 jack sockets – 4, 8 or 16 Ohms
- FX Loop: Yes – variable level FX loop
- Weight: 20Kg Unit Weight (24kg) Shipping
- Dimensions (W x H x D): 678 x 271 x 288 mm.
Laney IRT120H Ironheart Guitar Amplifier Head.
Producing 120 watts RMS of all ECC83 & 6L6 valve tone the Laney IRT120H possess masses of gain and like its metal relatives such as the Laney KLIPP and the Laney AOR hits you hard between the eyes like a power hammer from hell!
The Laney IRT120H preamp houses three channels: – Clean, Rhythm & Lead all with independent level controls. The Clean and the Rhythm channels share a 3- band EQ with pull-push shift features on each control that gives you total control over your sound allowing you to dial in that killer tone. The Lead channel has an independent 3- band EQ with pull-push shift features on each control allowing for some radical lead tones.
Everyone has a favorite boost pedal you always seem to end up putting in front of your amp well leave it at home! One great feature on the Laney IRONHEART is the Pre Boost feature. This works just like kicking in your favourite boost pedal right before your amp. It’s available where ever you are on the pre amp and can be switched in or out via the supplied footswitch.
A standout feature of the Laney IRONHEART range is the WATTS control in the master section. This allows you to really screw down the output of the IRONHEART’s 4 x 6L6 output section, down to less than 1 watt! Great for getting the sound of a full -blown metal head at bedroom levels.
Combine this with a Dynamics control which tightens up you low end when you’re playing a full power and you have a great metal tone at whatever level you decide to play at.
The Tone control works really effectively and allows you to make quick adjustments to your overall sound should you for example change guitars.
The Laney IRT120H features a custom designed and specifically tuned reverb allowing you to add just the right amount of reverb wash over your tone. Adding additional effects via external processors is a breeze the FX loop on the rear of the Laney IRT120H has a switchable level control meaning you can easily switch your FX loop output level to match the ideal level for your effects gear.
The IRT120H’s simple pre amp layout means you can easily dial your perfect tone.
Every Laney IRT120H is supplied with dedicated footswitch, which enables you to switch Pre Boost, channels and reverb without having to use the front panel.
There is no doubt that IRONHEART is a serious metal amp and much more.
You must be logged in to post a review.
Related products
-
Evo SP8
Original price was: ₹60,000.00.₹53,990.00Current price is: ₹53,990.00.Add to cartFeatures:
● 8x EVO Mic Preamps
● 2x JFET Instrument Inputs
● 8x Line Outputs
● 2x ADAT Inputs
● 2x ADAT Outputs
● Class Leading 32-bit AD/DA Converters
● Multi-Channel Smartgain
● ‘EVO Motion UI’ Control System
● Optional Rack Ears
● Word Clock Input
● 24bit / 96kHz -
Behringer Ultra-DI DI100 Direct Box
Original price was: ₹10,198.00.₹6,700.00Current price is: ₹6,700.00.Read moreCategory
Specification
Type
Active DI box
Channels
1
Frequency Response
10 Hz – 93 kHz
Noise Level
–110 dBu
THD + N (@1 kHz/0 dBu)
< 0.005 %
Input Impedance
> 250 kΩ
Load Impedance
> 600 Ω
Max Input Level
+10 / +30 / +50 dBu (via switchable pads)
Pads
Switchable -20 dB each (–20 dB & –40 dB total)
Ground Lift
Yes
Inputs
1× unbalanced ¼″ jack (in/link out), 1× unbalanced XLR
Outputs
1× balanced XLR out, 1× ¼″ link out
Power Supply
Phantom power 18–48 V DC or 9 V battery (auto-switching, battery off when phantom present)
Special Features
OT-1 output transformer, handles up to 3,000 W speaker-level input, rugged aluminum case, battery auto-off when phantom power applied
Dimensions
150 × 130 × 60 mm (≈5.91″ × 5.12″ × 2.36″)
Weight
~650 g
-
Audient ASP800
Original price was: ₹91,300.00.₹82,990.00Current price is: ₹82,990.00.Add to cart- 8 x World Class Audient Console Mic Pres
- 2 x Retro Channels with Dual Stage COLOUR Saturation Controls – HMX & IRON
- 2 x Discrete JFET Instrument Inputs
- Pristine 118-dB Burr-Brown A-D Converters
- Balanced Analogue Line Outputs
- ADAT Output for Expandability
- Word Clock Input
- All-Metal Enclosure
3 Years Warranty
-
Nektar MIDIFLEX4
Original price was: ₹9,400.00.₹8,490.00Current price is: ₹8,490.00.Add to cartFeatures:
- USB Class Compliant MIDI Interface
- 4 configurable MIDI Ports: 1-in / 3-out, 2-in / 2-out, or 4 out
- Automatic MIDI connection detection
- Multiple units can be used at the same time to expand the number of MIDI ports
- 2-1 MIDI merge or 1-3 MIDI split in standalone mode (requires optional USB power supply)
- Aluminum housing with 4 port status LEDs, 1 power LED, and a mode button
- Connections: 4 x MIDI DIN socket, 1 x USB Type-B
- Powered by USB or optional external standard USB power supply
- Includes standard USB cable
Reviews
There are no reviews yet.