Product Showcase
Behringer MicroHD HD400 2-Channel Hum Destroyer
Original price was: ₹5,165.00.₹4,200.00Current price is: ₹4,200.00.
|
Category |
Specification |
|---|---|
|
Type |
Passive 2-channel hum destroyer / ground‑loop isolator |
|
Channels |
2 (can handle either 2 mono or 1 stereo signal) |
|
Signal Conversion |
Converts unbalanced ↔ balanced signals automatically, with no signal loss |
|
Inputs |
2 × ¼″ TRS phone jacks |
|
Outputs |
2 × ¼″ TRS phone jacks |
|
Input Impedance |
~500 Ω (unbalanced) |
|
Output Impedance |
~600 Ω (balanced) |
|
Dimensions (W × H × D) |
104 × 32 × 57 mm |
|
Weight |
~180 g |
|
Power |
Passive, no power required |
|
Body Construction |
Rugged, compact metal housing |
|
Special Features |
Removes AC hum/noise, breaks ground loops, maintains audio quality |
Out of stock
MICROHD HD400
The HD400 is the ultra-affordable way to quickly and easily clean up your act! Whether you’re recording or performing, it’s important to keep AC hum out of the mix. No matter the quality of the venue’s wiring, the MICROHD HD400 Hum Destroyer eliminates AC hum quickly and reliably.
Mighty Hum Hunter
The HD400 features two channels allowing you to eliminate hum in two mono signals or one stereo signal. Placing the HD400 in-line between your stereo mixer and power amps for a squeaky-clean sound free of AC hum. It breaks ground loops safely while maintaining the highest sound quality. It can even convert your unbalanced signals into balanced without any signal degradation.
Hum Killer of a Deal
The incredibly-handy MICROHD HD400 is small enough to ride to the gig in your pocket, but really big when it comes to cleaning up your sound. Pick one the HD400 at your local Behringer dealer, or get yours online today – and make AC hum a thing of the past!
You must be logged in to post a review.
Related products
-
ART HEADAMP 4PRO Five Channel Headphone Amplifier with Talkback
Original price was: ₹10,554.00.₹10,000.00Current price is: ₹10,000.00.Add to cartCategory
Specification
Type
Stereo headphone amp (4 channels)
Analog Inputs
1× ¼″ TRS, 1× ⅛″ TRS (parallel wired)
Headphone Outputs
4× ¼″ TRS + 4× ⅛″ TRS
Max Input Level
+14 dBV
Input Impedance
90.9 kΩ
Max Gain
+20 dB
Max Output Level
+14 dBu
Output Impedance
47 Ω per output (others list ≈51 Ω)
Frequency Response
20 Hz – 20 kHz
SNR
>90 dB (ref 0 dBu)
THD
<0.01%
IMD (SMPTE)
0.01%
Power Supply
12 V DC adapter included
Dimensions (H×W×D)
47 × 117 × 104 mm (1.85″ × 4.6″ × 4.1″)
Weight
0.61 kg (1.3 lb)
LED Indicators
Power-on LED
Chassis
Custom extruded metal, stackable
Warranty
3 years (manufacturer)
-
Laney MINI-STB-SUPERG Stereo 3W Guitar Amplifier with Bluetooth
Original price was: ₹10,000.00.₹8,000.00Current price is: ₹8,000.00.Add to cartSpecifications:
- 2 x 3” full range drivers
- Clean & Drive
- Item dimensions: 142mm x 205mm x 100mm (HWD)
- Carton dimensions: 152mm x 213mm x 110mm (HWD)
- Item weight: 1.20kg
-
ART HEADAMP 6 PRO 6-Channel Headphone Amplifier
Original price was: ₹30,575.00.₹29,500.00Current price is: ₹29,500.00.Add to cartSpecifications
Inputs XLR, 1/4″ Outputs XLR, 1/4″ Input Impedance 40K Ω Main, 10K Ω Direct, 15K Ω Aux In Output Impedance <12 ΩHeadphones Maximum Input Level +21 dBu Maximum Output Level 150mW (600 Ω Headphones) 500mW (32 Ω Headphones) 150mW (8 Ω Headphone Maximum Gain 22 dB Total Harmonic Distortion <.01% Typical Signal to Noise Ratio >90dB Typical CMRR >40 dB Power Requirements 120 VAC / 50-60 Hz, or 230 VAC / 50 Hz, 15 W Dimensions (LWH) 6″ x 19″ x 1.75″, 15.2 cm x 48.3 x 4.45 Weight 5.3 lbs. (2.4kg) -
Laney IRT120H Ironheart Guitar Amplifier Head
Original price was: ₹132,000.00.₹75,000.00Current price is: ₹75,000.00.Add to cartLaney IRT120H Ironheart Guitar Amplifier Head Specifications:
- Power RMS: 120 watts RMS
- Inputs: 1 x Jack
- Channels: 3 – Clean, Rhythm & Lead
- Equalisation: Bass, Middle & Treble with Pull-Push EQ shift on each
- Master Presence Control: Overall Tone
- Boost Switch: Footswitchable Pre Boost
- Preamp Valves: 4 x ECC83
- Output Valves: 4 x 6L6
- Class: Class AB
- Reverb: Laney designed Digital reverb
- Footswitch: FS4-IRT supplied as standard – switches Channel, Clean, Reverb & Pre Boost
- Speaker connections: 2 jack sockets – 4, 8 or 16 Ohms
- FX Loop: Yes – variable level FX loop
- Weight: 20Kg Unit Weight (24kg) Shipping
- Dimensions (W x H x D): 678 x 271 x 288 mm.
Reviews
There are no reviews yet.