Product Showcase
ART Digital MPA-II 2-Channel Tube Preamp with Digital Connectivity
Original price was: ₹66,435.00.₹51,000.00Current price is: ₹51,000.00.
Specifications
| Input Impedance | 150-3000 (Omega) Adjustable (XLR), >800k (Omega) (Instrument) |
| Output Impedance | < 47 (Omega) (XLR) |
| Maximum Input Level | +19 dBu (Cannon) |
| Maximum Output Level | +27 dBu (XLR) |
| Maximum Gain | 75 dB |
| Frequency Response | 15 Hz to 48 kHz (+0, -1 dB) @ Normal Plate Voltage 15 Hz to 120 kHz (+0, -1 dB) @ High Plate Voltage |
| Total Harmonic Distortion | <0.005% (Typical) |
| Equivalent Input Noise | -129 dBu (XLR, “A” Weighted) |
| CMRR | >90dB |
| Power Requirements | USA – 105 to 125 VAC / 60 Hz Export Units Configured forCcountry of Destination |
The Digital MPA II is a two-channel preamp with streamlined controls and real tube tone in a 2U rackmount enclosure. It offers the features and sound of the Pro MPA II, with extended connectivity for any digital recording setup.
In addition to the analog XLR and 1/4 connections, it features AES/EBU, S/PDIF, and optical outputs. It also features an optical input and word clock input and thru jacks. Sample rate and dither is set by a rotary control on the front panel.
Simple to use and easy to integrate, the Digital MPA II offers classic tube warmth for the modern studio.
Features
- Variable Input Impedance For Flexible Microphone Voicing (150 ohms To 2400 ohms)
- Selectable Plate Voltage
- Large VU Meters
- Backlit Function Switches
- Discrete Class-A Input Microphone Preamplifier
- Low Noise at Lower Gain Settings
- Extremely Low Total Harmonic Distortion (THD)
- Wide Frequency Response
- Additional Front Mounted Instrument Input Jack
- Supports Mid/Side Miking Technique
- Operates at +4dbm/-10dbv Output
- Selectable Stereo/Dual Operation of Output Controls
- Automatic Instrument Input Selection
- 24-204KHz External sample rate
- 44.1K, 48K, 88.2K, 96K, 176.4K, 192K Internal sample rates
- 24/16 bit switchable dithering
- Wide dynamic range A/D
- Rotary Encoder for quick selection of sample rate
- Separate analog and digital output level controls
- Digital Level LED meters display both Average and Peak level
- ADAT optical I/O
- Sync to incoming ADAT data rate
- Switch selectable optical output (S/PDIF or ADAT)
- AES/EBU and S/PDIF outputs
You must be logged in to post a review.
Related products
-
ART HEADAMP 6 PRO 6-Channel Headphone Amplifier
Original price was: ₹30,575.00.₹29,500.00Current price is: ₹29,500.00.Add to cartSpecifications
Inputs XLR, 1/4″ Outputs XLR, 1/4″ Input Impedance 40K Ω Main, 10K Ω Direct, 15K Ω Aux In Output Impedance <12 ΩHeadphones Maximum Input Level +21 dBu Maximum Output Level 150mW (600 Ω Headphones) 500mW (32 Ω Headphones) 150mW (8 Ω Headphone Maximum Gain 22 dB Total Harmonic Distortion <.01% Typical Signal to Noise Ratio >90dB Typical CMRR >40 dB Power Requirements 120 VAC / 50-60 Hz, or 230 VAC / 50 Hz, 15 W Dimensions (LWH) 6″ x 19″ x 1.75″, 15.2 cm x 48.3 x 4.45 Weight 5.3 lbs. (2.4kg) -
Behringer HA8000 V2 8-Channel Headphone Mixing/Distribution Amplifier
Original price was: ₹38,444.00.₹20,000.00Current price is: ₹20,000.00.Add to cartCategory
Specification
Type
8‑channel headphone mixing/distribution amplifier (1 U rack)
Amplifier Channels
8 independent high‑power stereo amplifiers, each with level control and LED meter
Main Inputs
2 × stereo (Main In 1 & 2), ¼″ TRS, servo-balanced
Main Input Impedance
Balanced: 40 kΩ; Unbalanced: 20 kΩ
Max Main Input Level
+16 dBu (some sources list +22 dBu)
Direct Inputs
8 × independent ¼″ TRS (one per channel)
Direct Input Impedance
~15 kΩ
Phone Outputs
16 × ¼″ TRS (8 front, 8 rear), dual per channel
Max Output Level
+24 dBm into 100 Ω, +19 dBm into 8 Ω
Minimum Load Impedance
8 Ω
Frequency Response
10 Hz – 150 kHz, ±3 dB
Dynamic Range
~101–103 dB (22 Hz–22 kHz)
Signal‑to‑Noise Ratio
> 87 dB or > 90 dB depending on spec
THD + N
~0.006–0.007 % @ +4 dBu, 1 kHz
Controls (per channel)
Output level knob, Main In 1/2 select, Mono/Stereo switch, 8-digit LED meter
Master Controls
Two Main Input level dials, 5-segment Input LED meter
Power Supply
“Planet Earth” switching supply (100–240 V AC autorange), draws ~35 W
Dimensions (H×W×D)
44 × 483 × 149 mm (1.75″ × 19″ × 5.9″)
Weight
~1.9 kg (4.2 lb)
Warranty
3 years (varies by region)
-
Behringer Powerplay P1 Personal In-Ear Monitor Amplifier
Original price was: ₹16,515.00.₹8,500.00Current price is: ₹8,500.00.Read moreCategory
Specification
Type
Personal in-ear monitor (IEM) amplifier
Inputs
2 × balanced XLR (mono/stereo)
Main Controls
Volume (level) knob, Balance/Mix knob (dual-channel mixing)
Output
3.5 mm (1/8″) headphone jack
Input Impedance
20 kΩ
Output Impedance
10 Ω per channel
Frequency Response
20 Hz – 80 kHz (±0.5 dB)
THD + N
0.01 %
Signal-to-Noise Ratio
> 90 dB (A‑weighted)
CMRR
> 50 dB
Crosstalk
> 40 dB
Normal Input Level
+2 dBu
Max Input Level
+6 dBu
Limiter Threshold
+7 dBu
Max Output Level
+9.5 dBu
Limiter
Built-in current limiter
Power Supply
9 V battery (alkaline or rechargeable) or optional 9 V DC adapter
Battery Life
Up to 12 hours (9 V battery)
Standby Power Consumption
300 mW
Max Operating Current
90 mA
Max Output Power
40 mW per channel into 20 Ω
Indicators
Power and battery status LEDs (green/red)
Chassis & Mounting
Rugged metal housing, belt clip, mic-stand mountable (5/8″ & 3/8″)
Dimensions (H × W × D)
45 × 125 × 85 mm (1.8″ × 4.9″ × 3.3″)
Weight
0.27 kg (0.6 lb)
-
Audient ASP800
Original price was: ₹89,100.00.₹79,990.00Current price is: ₹79,990.00.Add to cart- 8 x World Class Audient Console Mic Pres
- 2 x Retro Channels with Dual Stage COLOUR Saturation Controls – HMX & IRON
- 2 x Discrete JFET Instrument Inputs
- Pristine 118-dB Burr-Brown A-D Converters
- Balanced Analogue Line Outputs
- ADAT Output for Expandability
- Word Clock Input
- All-Metal Enclosure
3 Years Warranty
Reviews
There are no reviews yet.