Product Showcase
ART Digital MPA-II 2-Channel Tube Preamp with Digital Connectivity
Original price was: ₹66,435.00.₹51,000.00Current price is: ₹51,000.00.
Specifications
| Input Impedance | 150-3000 (Omega) Adjustable (XLR), >800k (Omega) (Instrument) |
| Output Impedance | < 47 (Omega) (XLR) |
| Maximum Input Level | +19 dBu (Cannon) |
| Maximum Output Level | +27 dBu (XLR) |
| Maximum Gain | 75 dB |
| Frequency Response | 15 Hz to 48 kHz (+0, -1 dB) @ Normal Plate Voltage 15 Hz to 120 kHz (+0, -1 dB) @ High Plate Voltage |
| Total Harmonic Distortion | <0.005% (Typical) |
| Equivalent Input Noise | -129 dBu (XLR, “A” Weighted) |
| CMRR | >90dB |
| Power Requirements | USA – 105 to 125 VAC / 60 Hz Export Units Configured forCcountry of Destination |
The Digital MPA II is a two-channel preamp with streamlined controls and real tube tone in a 2U rackmount enclosure. It offers the features and sound of the Pro MPA II, with extended connectivity for any digital recording setup.
In addition to the analog XLR and 1/4 connections, it features AES/EBU, S/PDIF, and optical outputs. It also features an optical input and word clock input and thru jacks. Sample rate and dither is set by a rotary control on the front panel.
Simple to use and easy to integrate, the Digital MPA II offers classic tube warmth for the modern studio.
Features
- Variable Input Impedance For Flexible Microphone Voicing (150 ohms To 2400 ohms)
- Selectable Plate Voltage
- Large VU Meters
- Backlit Function Switches
- Discrete Class-A Input Microphone Preamplifier
- Low Noise at Lower Gain Settings
- Extremely Low Total Harmonic Distortion (THD)
- Wide Frequency Response
- Additional Front Mounted Instrument Input Jack
- Supports Mid/Side Miking Technique
- Operates at +4dbm/-10dbv Output
- Selectable Stereo/Dual Operation of Output Controls
- Automatic Instrument Input Selection
- 24-204KHz External sample rate
- 44.1K, 48K, 88.2K, 96K, 176.4K, 192K Internal sample rates
- 24/16 bit switchable dithering
- Wide dynamic range A/D
- Rotary Encoder for quick selection of sample rate
- Separate analog and digital output level controls
- Digital Level LED meters display both Average and Peak level
- ADAT optical I/O
- Sync to incoming ADAT data rate
- Switch selectable optical output (S/PDIF or ADAT)
- AES/EBU and S/PDIF outputs
You must be logged in to post a review.
Related products
-
PreSonus HP2
Original price was: ₹16,400.00.₹14,800.00Current price is: ₹14,800.00.Add to cartFeatures- Battery-Powered Headphone Amplifier
- Mini 1/8″ Output Stereo Connector
- 5-Pin Mini XLR Input Connector
- Includes Dual 1/4″ TRS Input Cable
- 9V Battery or DC Power
- Volume and Pan Control Knobs
- Battery LED Indicators
-
MACKIE HM-800 8-CHANNEL HEADPHONE AMPLIFIER
Original price was: ₹43,660.00.₹27,500.00Current price is: ₹27,500.00.Add to cartPerfect for studios, practice spaces, quiet stages, and more, the HM Series offers everything you need whether it is just splitting a single signal to your band, or more complex headphone distribution. FLEXIBLE HEADPHONE AMPLIFICATION The 19” rackmount HM-800 8-Channel Headphone Amplifier offers up to 10 available mixes with a total of 16 headphone outputs. …
-
Behringer Ultra-DI DI100 Direct Box
Original price was: ₹10,198.00.₹6,700.00Current price is: ₹6,700.00.Read moreCategory
Specification
Type
Active DI box
Channels
1
Frequency Response
10 Hz – 93 kHz
Noise Level
–110 dBu
THD + N (@1 kHz/0 dBu)
< 0.005 %
Input Impedance
> 250 kΩ
Load Impedance
> 600 Ω
Max Input Level
+10 / +30 / +50 dBu (via switchable pads)
Pads
Switchable -20 dB each (–20 dB & –40 dB total)
Ground Lift
Yes
Inputs
1× unbalanced ¼″ jack (in/link out), 1× unbalanced XLR
Outputs
1× balanced XLR out, 1× ¼″ link out
Power Supply
Phantom power 18–48 V DC or 9 V battery (auto-switching, battery off when phantom present)
Special Features
OT-1 output transformer, handles up to 3,000 W speaker-level input, rugged aluminum case, battery auto-off when phantom power applied
Dimensions
150 × 130 × 60 mm (≈5.91″ × 5.12″ × 2.36″)
Weight
~650 g
-
Behringer Powerplay P1 Personal In-Ear Monitor Amplifier
Original price was: ₹16,515.00.₹8,500.00Current price is: ₹8,500.00.Read moreCategory
Specification
Type
Personal in-ear monitor (IEM) amplifier
Inputs
2 × balanced XLR (mono/stereo)
Main Controls
Volume (level) knob, Balance/Mix knob (dual-channel mixing)
Output
3.5 mm (1/8″) headphone jack
Input Impedance
20 kΩ
Output Impedance
10 Ω per channel
Frequency Response
20 Hz – 80 kHz (±0.5 dB)
THD + N
0.01 %
Signal-to-Noise Ratio
> 90 dB (A‑weighted)
CMRR
> 50 dB
Crosstalk
> 40 dB
Normal Input Level
+2 dBu
Max Input Level
+6 dBu
Limiter Threshold
+7 dBu
Max Output Level
+9.5 dBu
Limiter
Built-in current limiter
Power Supply
9 V battery (alkaline or rechargeable) or optional 9 V DC adapter
Battery Life
Up to 12 hours (9 V battery)
Standby Power Consumption
300 mW
Max Operating Current
90 mA
Max Output Power
40 mW per channel into 20 Ω
Indicators
Power and battery status LEDs (green/red)
Chassis & Mounting
Rugged metal housing, belt clip, mic-stand mountable (5/8″ & 3/8″)
Dimensions (H × W × D)
45 × 125 × 85 mm (1.8″ × 4.9″ × 3.3″)
Weight
0.27 kg (0.6 lb)
Reviews
There are no reviews yet.