Product Showcase
Sale!
| DBR10 | ||||
|---|---|---|---|---|
| Speaker type | 2-way, Bi-amp powered speaker, Bass-reflex type | |||
| Frequency range (-10dB) | 55Hz – 20kHz | |||
| Nominal coverage | H | 90° | ||
| V | 60° | |||
| Components | LF | Diameter:10″ cone, Voice Coil:2″, Magnet:Ferrite | ||
| HF | Diaphragm:1″, Type: 1″ throat compression driver, Magnet:Ferrite | |||
| Crossover | 2.1kHz: FIR-X tuning™ (linear phase FIR filter) | |||
| Output power | Dynamic:700 W (LF: 500 W, HF: 200 W) / Continuous: 325 W (LF: 260 W, HF: 65 W) | |||
| Maximum output level (1m; on axis) | 129dB SPL | |||
| I/O connectors | INPUT1: Combo x1, INPUT2: Combo x 1 + RCA pin x 2 (Unbalanced), OUTPUT: XLR3-32 x 1 (CH1 Parallel Through or CH1+CH2 Mix) | |||
| Processors | D-CONTOUR: FOH/MAIN, MONITOR, OFF | |||
| Heat dissipation | Fan cooling, 4 speeds | |||
| Power requirements | 100 V, 100-120V, 220-240 V, 110/127/220V (Brazil), 50/60Hz | |||
| Power consumption | 60W(1/8 Power Consumption), 18W(Idle) | |||
| Cabinet material | Plastic | |||
| Finish | Black | |||
| Handle | Top x 1 | |||
| Flying and mounting hardware | Bottom x 2 (Fit for M8 x 15 mm eyebolts) | |||
| Pole socket | 35mm (Bottom x 1) | |||
| Dimensions | W | 308mm (12.1″) | ||
| H | 493mm (19.4″) | |||
| D | 289mm (11.4″) | |||
| Net weight | 10.5 kg (23.2 lbs) | |||
You must be logged in to post a review.
Related products
-
Kali Audio WS-12 V2 Subwoofer
Original price was: ₹108,200.00.₹97,990.00Current price is: ₹97,990.00.Add to cartFeatures:
- 1,000W, 12″ powered subwoofer
- 23Hz–160Hz frequency response faithfully reproduces your mix’s low-frequency content
- 123dB max SPL — loud enough for 5.1 arrays and light PA use (5.1 systems require an external processor and crossover)
- Built-in limiter circuit protects against unsafe voltage levels
- Small size fits easily under your desk and in most small passenger cars
- Mega-durable 18mm plywood enclosure and roadworthy side handles
- Low-noise port tube yields clean, punchy bass with zero chuffing
- Selectable crossovers every 20Hz between 40Hz and 140Hz for use in a myriad of applications
- Presets for Kali’s LP-6, LP-8, and IN-8 studio monitors, plus LFE and external crossover settings
- 4 preset gain adjustment settings compensate for the sub’s positioning
- Polarity reverse function resolves a common sonic problem
- RCA inputs accommodate consumer-grade devices
- Power-saving standby mode
- Rear-panel jack enables you to use a 3rd-party footswitch to bypass the subwoofer
-
Alto Professional TX315
Original price was: ₹63,980.00.₹33,590.00Current price is: ₹33,590.00.Add to cartKey features
- 700 Watts peak (350 Watts continuous) Class D power
- The 90 H x 60 V horn delivers greater coverage
- The full grille delivers style and provides protection for your investment.
- 15-inch (381 mm) LF driver, 2-inch (51 mm) voice coil
- 1-inch (25.4 mm) titanium HF compression driver
- Lightweight, portable design for main or wedge monitor operation
- Standard speaker pole socket
- Bi-amplified design with precision active crossover and EQ
- Balanced XLR Mic/Line input, Link Output and Volume control
- Integrated analog limiter and overload protection circuitry
- Contour switch with low- and high-frequency +3dB boost
- Ground-lift switch removes unwanted hum or buzz
- Designed and tuned in the USA
-
Alto Professional TS412
Original price was: ₹89,980.00.₹47,250.00Current price is: ₹47,250.00.Add to cartKey Features
- 2500 W peak (1600 LF + 900 HF) 1250 W continuous RMS (800 LF + 450 HF)
- FREE Alto App (iOS/Android) for remote configuration and control
- Bluetooth® audio streaming direct from device
- On-board DSP with 4 Speaker Use modes (inc. Custom EQ via App)
- True Wireless Stereo speaker linking via Bluetooth®
- Integrated 3-channel mixer with dual XLR ¼-inch combo inputs, mic/line switches and independent level controls
- XLR Mix output, Speaker Use, and Sub Size Controls
- 12” driver, 2.5” (63 mm) high-temperature voice coil
- 1” exit ceramic driver with 1.4” (35 mm) coil
- Lightweight enclosure for easy transport, set up and installation
- Versatile design – pole-mountable, wedge monitor or flown application with integral M10 suspension points
- Powerful and efficient class D amplifiers with fanless cooling design to run cleaner, quieter and with greater long-term reliability
- Designed and tuned in the USA
-
Alto Professional TX312
Original price was: ₹57,980.00.₹30,450.00Current price is: ₹30,450.00.Add to cartKey features
- 700 Watts peak (350 Watts continuous) Class D power
- The 90 H x 60 V horn delivers greater coverage
- The full grille delivers style and provides protection for your investment.
- 12-inch (305 mm) LF driver, 2-inch (51 mm) voice coil
- 1-inch (25.4 mm) titanium HF compression driver
- Lightweight, portable design for main or wedge monitor operation
- Standard speaker pole socket
- Bi-amplified design with precision active crossover and EQ
- Balanced XLR Mic/Line input, Link Output and Volume control
- Integrated analog limiter and overload protection circuitry
- Contour switch with low- and high-frequency +3dB boost
- Ground-lift switch removes unwanted hum or buzz
- Designed and tuned in the USA
Reviews
There are no reviews yet.