Product Showcase
Sale!
| DBR10 | ||||
|---|---|---|---|---|
| Speaker type | 2-way, Bi-amp powered speaker, Bass-reflex type | |||
| Frequency range (-10dB) | 55Hz – 20kHz | |||
| Nominal coverage | H | 90° | ||
| V | 60° | |||
| Components | LF | Diameter:10″ cone, Voice Coil:2″, Magnet:Ferrite | ||
| HF | Diaphragm:1″, Type: 1″ throat compression driver, Magnet:Ferrite | |||
| Crossover | 2.1kHz: FIR-X tuning™ (linear phase FIR filter) | |||
| Output power | Dynamic:700 W (LF: 500 W, HF: 200 W) / Continuous: 325 W (LF: 260 W, HF: 65 W) | |||
| Maximum output level (1m; on axis) | 129dB SPL | |||
| I/O connectors | INPUT1: Combo x1, INPUT2: Combo x 1 + RCA pin x 2 (Unbalanced), OUTPUT: XLR3-32 x 1 (CH1 Parallel Through or CH1+CH2 Mix) | |||
| Processors | D-CONTOUR: FOH/MAIN, MONITOR, OFF | |||
| Heat dissipation | Fan cooling, 4 speeds | |||
| Power requirements | 100 V, 100-120V, 220-240 V, 110/127/220V (Brazil), 50/60Hz | |||
| Power consumption | 60W(1/8 Power Consumption), 18W(Idle) | |||
| Cabinet material | Plastic | |||
| Finish | Black | |||
| Handle | Top x 1 | |||
| Flying and mounting hardware | Bottom x 2 (Fit for M8 x 15 mm eyebolts) | |||
| Pole socket | 35mm (Bottom x 1) | |||
| Dimensions | W | 308mm (12.1″) | ||
| H | 493mm (19.4″) | |||
| D | 289mm (11.4″) | |||
| Net weight | 10.5 kg (23.2 lbs) | |||
You must be logged in to post a review.
Related products
-
Dynaudio 9S
Original price was: ₹151,990.00.₹136,990.00Current price is: ₹136,990.00.Add to cart- 300W Powered Subwoofer
- Onboard 300-watt Class D amplifier module
- 9.5″ MSP long-throw woofer for accurate low-frequency reproduction
- Double front baffle maximizes rigidity for higher-volume listening sessions
- Frequency response: 22Hz–175Hz ±3dB
- Master/Slave feature for daisy-chaining multiple subwoofers
- Sealed-cabinet design
-
Dynaudio Core Sub
Original price was: ₹595,990.00.₹535,990.00Current price is: ₹535,990.00.Add to cart- Unique 4 x 9″ studio subwoofer delivers deep yet ultra-precise low frequencies
- MSP+ (Magnesium Silicate Polymer) Hybrid Drive speakers feature lightweight aluminum construction for extremely low distortion
- Extremely accurate all the way down to 13.5Hz, well below the threshold of human hearing
- Highly efficient 1000W amplifier provides massive headroom
- Analog and AES3 digital inputs let you keep your signal digital right to the end
- 24-bit sampling rate and 192kHz resolution; dependent on input signal
- Core DSP optimizes imaging, balance, and bass extension
- All drivers handcrafted by Dynaudio in Denmark
-
Kali Audio WS-12 V2 Subwoofer
Original price was: ₹108,200.00.₹97,990.00Current price is: ₹97,990.00.Add to cartFeatures:
- 1,000W, 12″ powered subwoofer
- 23Hz–160Hz frequency response faithfully reproduces your mix’s low-frequency content
- 123dB max SPL — loud enough for 5.1 arrays and light PA use (5.1 systems require an external processor and crossover)
- Built-in limiter circuit protects against unsafe voltage levels
- Small size fits easily under your desk and in most small passenger cars
- Mega-durable 18mm plywood enclosure and roadworthy side handles
- Low-noise port tube yields clean, punchy bass with zero chuffing
- Selectable crossovers every 20Hz between 40Hz and 140Hz for use in a myriad of applications
- Presets for Kali’s LP-6, LP-8, and IN-8 studio monitors, plus LFE and external crossover settings
- 4 preset gain adjustment settings compensate for the sub’s positioning
- Polarity reverse function resolves a common sonic problem
- RCA inputs accommodate consumer-grade devices
- Power-saving standby mode
- Rear-panel jack enables you to use a 3rd-party footswitch to bypass the subwoofer
-
Alto Professional TX315
Original price was: ₹63,980.00.₹33,590.00Current price is: ₹33,590.00.Add to cartKey features
- 700 Watts peak (350 Watts continuous) Class D power
- The 90 H x 60 V horn delivers greater coverage
- The full grille delivers style and provides protection for your investment.
- 15-inch (381 mm) LF driver, 2-inch (51 mm) voice coil
- 1-inch (25.4 mm) titanium HF compression driver
- Lightweight, portable design for main or wedge monitor operation
- Standard speaker pole socket
- Bi-amplified design with precision active crossover and EQ
- Balanced XLR Mic/Line input, Link Output and Volume control
- Integrated analog limiter and overload protection circuitry
- Contour switch with low- and high-frequency +3dB boost
- Ground-lift switch removes unwanted hum or buzz
- Designed and tuned in the USA
Reviews
There are no reviews yet.