Product Showcase
RODE NT6 Compact 1/2″ Condenser
Original price was: ₹42,200.00.₹34,000.00Current price is: ₹34,000.00.
|
Feature |
Specification |
|---|---|
|
Acoustic Principle |
Pressure Gradient |
|
Active Electronics |
JFET impedance converter with bipolar output buffer |
|
Capsule Size |
0.50” |
|
Polar Pattern |
Cardioid |
|
Address Type |
End |
|
Frequency Range |
40Hz – 20kHz |
|
Output Impedance |
200Ω |
|
Maximum SPL |
135 dB SPL |
|
Maximum Output Level |
6.0 mV (@ 1kHz, 1% THD into 1KΩ load) |
|
Sensitivity |
-37.0 dB re 1V/Pa (16.00 mV @ 94 dB SPL) ±2 dB @ 1kHz |
|
Equivalent Noise |
19 dBA |
|
Power Requirements |
P24 and P48 phantom power |
|
Output Connection |
XLR |
The NT6 is a small-diaphragm cardioid condenser microphone with a remote capsule, specifically designed for difficult mounting applications where the highest quality audio is required.
The microphone is split into two modular components that are connected via a custom 3-metre shielded, Kevlar-reinforced cable. The head features a 1/2-inch gold-sputtered condenser capsule with a multi-position mounting ring that provides 180 degrees of vertical rotation. The body houses the microphone preamp, which features a high-pass filter (80Hz) and a -10dB pad.
- Premium small-diaphragm condenser microphone with remote capsule
- 1/2-inch gold sputtered
- Two-stage pad, two-stage high-pass filter
- Ideal for difficult mounting applications
- 10-year warranty
You must be logged in to post a review.
Related products
-
Lauten Audio LS-308 V2
Original price was: ₹70,495.00.₹66,000.00Current price is: ₹66,000.00.Add to cartThe Large-diaphragm Condenser for Challenging Environments The Lauten Audio LS-308 is a noise-rejecting, high-dynamic-range, large-diaphragm condenser microphone that’s a real problem-solver in challenging scenarios where isolation is desired but difficult to achieve. Featuring a second-order cardioid polar pattern with 270 degrees of off-axis frequency rejection and ultra-high dynamic range, the LS-308 is designed for use …
-
Sontronics CORONA
Original price was: ₹36,050.00.₹34,000.00Current price is: ₹34,000.00.Add to cart- Polar pattern: Supercardioid
- Frequency response: 50Hz – 15kHz
- Sensitivity: -50dB ±2dB
- Impedance: ≤600 Ohms
- Connector: Three-pin XLR
- Power: Phantom power NOT required
- Dimensions: 160 x 120 x 60mm
- Weight: 369g
- Comes with: hard-shell flightcase
-
Audio-Technica Microphone AT4040
Original price was: ₹94,400.00.₹55,000.00Current price is: ₹55,000.00.Add to cart- Transparent uppers/mids balanced by rich low-end qualities combine with advanced acoustic engineering for extensive performance capabilities and highest quality
- Dual-diaphragm capsule design maintains precise polar pattern definition across the full frequency range of the microphone
- The 2-micron-thick, vapor-deposited gold diaphragms undergo a five-step aging process so that the optimum characteristics achieved remain constant over years of use
- Three switchable polar patterns: omni, cardioid, figure-of-eight
- Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
- State-of-the-art surface-mount electronics ensure compliance with A-T’s stringent consistency and reliability standards
- Switchable 80 Hz hi-pass filter and 10 dB pad
- Custom shock mount provides superior isolation
-
Sontronics Drum Pack
Original price was: ₹85,615.00.₹83,000.00Current price is: ₹83,000.00.Add to cart-
Polar pattern (all mics): Cardioid
-
Pad: 0/-15dB (DM-1B), 0/-10dB (DM-1S, DM-1T & STC-10)
-
Filter (STC-10 only): Linear/75Hz
-
Freq. response: 20Hz – 20kHz (DM-1B), 30Hz – 20kHz (DM-1S & 1T, STC-10)
-
Sensitivity: 6mV/Pa -45dB ±2dB (DM-1B),
-
8mV/Pa -42dB ±2dB (DM-1S & 1T),
-
11mV/Pa -39dB ±2dB (STC-10)
-
Impedance (all mics): ≤200 Ohms
-
Equivalent noise level (A-weighted): 14dB (DM-1B, 1S & 1T), 18dB (STC-10)
-
Max. SPL*: 155dB (DM-1B), 135dB (DM-1S & 1T), 130dB (STC-10)
-
Power sources (all mics): 48V ±4V phantom power required
-
Connector (all mics): 3-pin XLR
-
Dimensions: 144 x 72 x 72mm (DM-1B),
-
91 x 22 x 22mm (DM-1S & 1T),
-
150 x 21 x 21mm (STC-10)
-
Weight: 829g (DM-1B), 86g (DM-1S & 1T), 125g (STC-10)
-
Reviews
There are no reviews yet.