Category
- ACCESSORIES
- AUDIO INTERFACES
- BOSS
- brass and wood winds
- DJ CONTROLLERS
- DRUMS & PERCUSSION
- EFFECTS PROCESSOR
- GUITAR
- KEYBOARDS
- OTHER
- PIANO
- SPEAKER
- STOCK CLEARANCE SALE
- STUDIO/ RECORDING
- VIOLINS

Audio-Technica Microphone AT4040
₹94,400.00 Original price was: ₹94,400.00.₹55,000.00Current price is: ₹55,000.00.
- Transparent uppers/mids balanced by rich low-end qualities combine with advanced acoustic engineering for extensive performance capabilities and highest quality
- Dual-diaphragm capsule design maintains precise polar pattern definition across the full frequency range of the microphone
- The 2-micron-thick, vapor-deposited gold diaphragms undergo a five-step aging process so that the optimum characteristics achieved remain constant over years of use
- Three switchable polar patterns: omni, cardioid, figure-of-eight
- Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
- State-of-the-art surface-mount electronics ensure compliance with A-T’s stringent consistency and reliability standards
- Switchable 80 Hz hi-pass filter and 10 dB pad
- Custom shock mount provides superior isolation
| Microphones | |
|---|---|
| Element | Externally-polarized (DC bias) condenser |
| Polar Pattern | Cardioid, Omnidirectional, Figure-of-eight, Multi-pattern |
| Frequency Response | 20 – 18,000 Hz |
| Low Frequency Roll Off | 80 Hz, 12 dB/octave |
| Open Circuit Sensitivity | -36 dB (15.8 mV), re 1V at 1 Pa |
| Maximum Input Sound Level | 149 dB SPL, 1 kHz at 1% T.H.D.; 159 dB SPL, with 10 dB pad (nominal) |
| Dynamic Range | 132 dB, 1 kHz at Max SPL |
| Signal-to-Noise Ratio | 77 dB, 1 kHz at 1 Pa |
| Phantom Power Requirements | 48V DC, 4.2 mA typical |
| Weight | 510g |
| Dimensions | 7.40″ (188.0 mm) long, 2.10″ (53.4 mm) maximum body diameter |
| Accessories Included | AT8449a shock mount for 5/8″-27 threaded stands; protective carrying case |
You must be logged in to post a review.
Related products
-
Sontronics MERCURY
₹220,355.00Original price was: ₹220,355.00.₹215,000.00Current price is: ₹215,000.00.Add to cart- Polar pattern: Sweepable from omni to figure-of-eight & everything in between
- Frequency response: 20Hz – 20kHz
- Pad: 0, -10dB
- Filter: Linear, 75Hz
- Sensitivity: 18mV/Pa -33dB ±1.5dB (0dB = 1V/Pa @ 1,000Hz)
- Impedance: ≤200 Ohms
- Equivalent noise level: <12dB (A-weighted)
- Max SPL (for 0.5% THD @ 1kHz): 125dB
- Power: 115/230V *phantom power NOT required*
- Connector: 8-pin connector (mic),
- 3-pin XLR-M (power supply)
- Dimensions: 250 x 90 x 80mm
- Weight: 2317g (mic only)
- Comes with: wooden box (for Mercury mic), shockmount, cables, power supply, aluminium flightcase
-
Lauten Audio LA-220 V2
₹50,765.00Original price was: ₹50,765.00.₹48,000.00Current price is: ₹48,000.00.Add to cartLA-220 CLASSIC OR CLEAN FET MIC SOUND AT THE FLIP OF A SWITCH VOCALS // DRUMS // ACOUSTIC GUITAR // ELECTRIC GUITAR STUDIO SOUND IN REAL-WORLD SPACES The LA-220 is a two-tone FET microphone that allows you to choose between the warmth of a classic microphone and the clarity of a modern microphone at the …
-
Audio Technica Microphone AT2020
₹15,694.00Original price was: ₹15,694.00.₹8,500.00Current price is: ₹8,500.00.Add to cartThe AT2020 is an affordable microphone offering versatile features. The AT2020 is ideal for all types of content creators, from musicians and podcasters to streamers. This side-address condenser microphone offers critically acclaimed sound and handles high SPLs effortlessly. With a cardioid polar pattern, this quality mic delivers unmatched sound and reliable performance without any unwanted background noise. The AT2020 condenser microphone is the perfect solution for any home recording studio at an affordable price.
-
Sontronics Drum Pack Plus
₹116,240.00Original price was: ₹116,240.00.₹113,000.00Current price is: ₹113,000.00.Add to cart-
Polar pattern (all mics): Cardioid
-
Pad: 0/-15dB (DM-1B), 0/-10dB (DM-1S, DM-1T & STC-10)
-
Filter (STC-10 only): Linear/75Hz
-
Freq. response: 20Hz – 20kHz (DM-1B), 30Hz – 20kHz (DM-1S & 1T, STC-10)
-
Sensitivity: 6mV/Pa -45dB ±2dB (DM-1B),
-
8mV/Pa -42dB ±2dB (DM-1S & 1T),
-
11mV/Pa -39dB ±2dB (STC-10)
-
Impedance (all mics): ≤200 Ohms
-
Equivalent noise level (A-weighted): 14dB (DM-1B, 1S & 1T), 18dB (STC-10)
-
Max. SPL*: 155dB (DM-1B), 135dB (DM-1S & 1T), 130dB (STC-10)
-
Power sources (all mics): 48V ±4V phantom power required
-
Connector (all mics): 3-pin XLR
-
Dimensions: 144 x 72 x 72mm (DM-1B),
-
91 x 22 x 22mm (DM-1S & 1T),
-
150 x 21 x 21mm (STC-10)
-
Weight: 829g (DM-1B), 86g (DM-1S & 1T), 125g (STC-10)
-















Reviews
There are no reviews yet.