Category
- ACCESSORIES
- AUDIO INTERFACES
- BOSS
- brass and wood winds
- DJ CONTROLLERS
- DRUMS & PERCUSSION
- EFFECTS PROCESSOR
- GUITAR
- KEYBOARDS
- OTHER
- PIANO
- SPEAKER
- STOCK CLEARANCE SALE
- STUDIO/ RECORDING
- VIOLINS

Behringer HA8000 V2 8-Channel Headphone Mixing/Distribution Amplifier
₹38,444.00 Original price was: ₹38,444.00.₹20,000.00Current price is: ₹20,000.00.
|
Category |
Specification |
|---|---|
|
Type |
8‑channel headphone mixing/distribution amplifier (1 U rack) |
|
Amplifier Channels |
8 independent high‑power stereo amplifiers, each with level control and LED meter |
|
Main Inputs |
2 × stereo (Main In 1 & 2), ¼″ TRS, servo-balanced |
|
Main Input Impedance |
Balanced: 40 kΩ; Unbalanced: 20 kΩ |
|
Max Main Input Level |
+16 dBu (some sources list +22 dBu) |
|
Direct Inputs |
8 × independent ¼″ TRS (one per channel) |
|
Direct Input Impedance |
~15 kΩ |
|
Phone Outputs |
16 × ¼″ TRS (8 front, 8 rear), dual per channel |
|
Max Output Level |
+24 dBm into 100 Ω, +19 dBm into 8 Ω |
|
Minimum Load Impedance |
8 Ω |
|
Frequency Response |
10 Hz – 150 kHz, ±3 dB |
|
Dynamic Range |
~101–103 dB (22 Hz–22 kHz) |
|
Signal‑to‑Noise Ratio |
> 87 dB or > 90 dB depending on spec |
|
THD + N |
~0.006–0.007 % @ +4 dBu, 1 kHz |
|
Controls (per channel) |
Output level knob, Main In 1/2 select, Mono/Stereo switch, 8-digit LED meter |
|
Master Controls |
Two Main Input level dials, 5-segment Input LED meter |
|
Power Supply |
“Planet Earth” switching supply (100–240 V AC autorange), draws ~35 W |
|
Dimensions (H×W×D) |
44 × 483 × 149 mm (1.75″ × 19″ × 5.9″) |
|
Weight |
~1.9 kg (4.2 lb) |
|
Warranty |
3 years (varies by region) |
An articulate headphone mix can make all the difference in the outcome of a recording session. The 8-channel POWERPLAY PRO-8 HA8000 features superior performance, routing and mixing functions to accommodate even the most discerning set of ears. Two independent stereo Main Inputs, along with a dedicated Direct Input on each channel allows individual performers to obtain a more customized monitoring mix. When optimized mixes have to reach multiple listeners, each with their own specific requirements, the HA8000 delivers high-quality headphone mixing – in a class all its own!
All Together Now
The HA8000 offers 8 high-power amplifiers that can drive loads down to 8 Ohms. Each amplifier section features its own 8-digit LED Output Level meter, Main In 1/Main In 2 select switch, a stereo or dual mono select switch, and a ¼” Direct Input for integrating an additional sound source. The front panel gives you one ¼ ” Phones Out jack per channel. The Main Section features a dedicated 5-segment LED Input meter, plus Main In 1 and Main In 2 Level dials.
Connections
On the back panel you‘ll find an additional ¼” Phones Output per channel, allowing up to 16 pairs of headphones to listen to 8 separate mixes at once. The back panel also provides access to the HA8000’s per-channel Direct Inputs and the Main 1 & 2 Inputs.
Great Sound, Great Value
When a recording session calls for everyone‘s head and ears to be in the game, the POWERPLAY PRO-8 HA8000 is essential – and ultra-affordable. With 8 discrete channels and the ability to connect up to 16 sets of cans, this is one tool you will use every day.
Features:
- Professional, multi-purpose headphones amplifier system for stage and studio applications
- Highest sonic quality with virtually all types of headphones even at maximum volume
- 8 totally independent stereo high-power amplifier sections in one rack space
- 2 stereo Main inputs for two independent mixes, accessible from all 8 output channels
- 8 independent Direct inputs provide up to 8 individual stereo mixes
- Output level control and accurate 8-digit LED output meter per channel
- Mono/stereo switch per channel for more flexibility
- 1 front and 1 rear TRS phones connector per channel
- Direct input connector on each channel for easy connection of any sound source
- Parallel Main outputs allow cascading of several headphones amplifiers
- “Planet Earth” switching power supply for maximum flexibility (100-240 V~), noise-free audio, superior transient response plus low power consumption for energy savings
- Designed and engineered in Germany
You must be logged in to post a review.
Related products
-
Behringer MicroHD HD400 2-Channel Hum Destroyer
₹5,165.00Original price was: ₹5,165.00.₹4,200.00Current price is: ₹4,200.00.Read moreCategory
Specification
Type
Passive 2-channel hum destroyer / ground‑loop isolator
Channels
2 (can handle either 2 mono or 1 stereo signal)
Signal Conversion
Converts unbalanced ↔ balanced signals automatically, with no signal loss
Inputs
2 × ¼″ TRS phone jacks
Outputs
2 × ¼″ TRS phone jacks
Input Impedance
~500 Ω (unbalanced)
Output Impedance
~600 Ω (balanced)
Dimensions (W × H × D)
104 × 32 × 57 mm
Weight
~180 g
Power
Passive, no power required
Body Construction
Rugged, compact metal housing
Special Features
Removes AC hum/noise, breaks ground loops, maintains audio quality
-
Laney MINI-STB-SUPERG Stereo 3W Guitar Amplifier with Bluetooth
₹10,000.00Original price was: ₹10,000.00.₹8,000.00Current price is: ₹8,000.00.Add to cartSpecifications:
- 2 x 3” full range drivers
- Clean & Drive
- Item dimensions: 142mm x 205mm x 100mm (HWD)
- Carton dimensions: 152mm x 213mm x 110mm (HWD)
- Item weight: 1.20kg
-
Audient ASP800
₹91,300.00Original price was: ₹91,300.00.₹82,990.00Current price is: ₹82,990.00.Add to cart- 8 x World Class Audient Console Mic Pres
- 2 x Retro Channels with Dual Stage COLOUR Saturation Controls – HMX & IRON
- 2 x Discrete JFET Instrument Inputs
- Pristine 118-dB Burr-Brown A-D Converters
- Balanced Analogue Line Outputs
- ADAT Output for Expandability
- Word Clock Input
- All-Metal Enclosure
3 Years Warranty
-
Laney IRT120H Ironheart Guitar Amplifier Head
₹132,000.00Original price was: ₹132,000.00.₹75,000.00Current price is: ₹75,000.00.Add to cartLaney IRT120H Ironheart Guitar Amplifier Head Specifications:
- Power RMS: 120 watts RMS
- Inputs: 1 x Jack
- Channels: 3 – Clean, Rhythm & Lead
- Equalisation: Bass, Middle & Treble with Pull-Push EQ shift on each
- Master Presence Control: Overall Tone
- Boost Switch: Footswitchable Pre Boost
- Preamp Valves: 4 x ECC83
- Output Valves: 4 x 6L6
- Class: Class AB
- Reverb: Laney designed Digital reverb
- Footswitch: FS4-IRT supplied as standard – switches Channel, Clean, Reverb & Pre Boost
- Speaker connections: 2 jack sockets – 4, 8 or 16 Ohms
- FX Loop: Yes – variable level FX loop
- Weight: 20Kg Unit Weight (24kg) Shipping
- Dimensions (W x H x D): 678 x 271 x 288 mm.

















Reviews
There are no reviews yet.