Name: Yamaha DHR15 Loudspeaker
SKU: 4423
Availability: InStock

Yamaha DHR15 Loudspeaker

DHR15
Frequency range (-10dB)		44 Hz – 20 kHz
Coverage area		H90ﾟ x V60ﾟ
Crossover		1.8 kHz: FIR-X tuning™ (linear phase FIR filter)
Maximum Output Level (Measured peak, IEC noise@1m)		131 dB SPL
Components	LF	Diameter: 15″ cone, Voice Coil: 2.5″, Magnet: Ferrite
Components	HF	Diaphragm: 1.4″, Type: 1″ throat compression driver, Magnet: Ferrite
Amplifier class		Class-D
Power rating	Dynamic	1,000 W (LF: 800 W, HF: 200 W) *1
Power rating	Continuous	465 W (LF: 400 W, HF: 65 W)
Cooling		Fan cooling, 4 speeds
Power consumption		74 W (1/8power), 18 W (Idle)
Power requirements		100 V, 100-120 V, 220-240 V, 110/127/220 V (Brazil), 50/60 Hz
A/D D/A Converters		24 bit 48 kHz Sampling
Processors		HPF: OFF, 100 Hz, 120 Hz, 24 dB/Oct.; D-CONTOUR: FOH/MAIN, MONITOR, OFF
I/O connectors		INPUT1: Combo x1, INPUT2: Combo x 1 + RCA pin x 2 (Unbalanced), OUTPUT: XLR3-32 x 1 (CH1 Parallel Through or CH1+CH2 Mix)
Cabinet material		Plywood
Finish		Durable Polyurea Painting, Black
Handle		Side x2
Pole socket		Φ35 mm x2 (Bottom, 0° or -7°)
Rigging		Top x 2, Rear x 1 (Fit for M10 x 30 – 50 mm Eyebolts)
Floor Monitor Angle		–
Dimensions	W	432 mm (17.0″)
	H	692 mm (27.2″) (with rubber feet)
	D	405 mm (15.9″)
Net weight		24.0 kg (52.9 lbs)
Options		–

Spread the love

Featuring a plywood cabinet that delivers a clear sound with minimal vibration.
Plywood enclosure with a polyurea coating for a robust, scratch resistant surface.
Compact size despite the 15-inch LF driver that provides excellent low frequency response.
Dual-angle pole sockets offer both 0° or a -7° down tilt.
Rigging points for use with eye bolts.
Propitiatory FIR-X„ tuning, provides FIR filtering and corrective EQ, minimizing phase distortion.