Category
- ACCESSORIES
- AUDIO INTERFACES
- BOSS
- brass and wood winds
- DJ CONTROLLERS
- DRUMS & PERCUSSION
- EFFECTS PROCESSOR
- GUITAR
- KEYBOARDS
- OTHER
- PIANO
- SPEAKER
- STOCK CLEARANCE SALE
- STUDIO/ RECORDING
- VIOLINS

Sontronics STC-3X Pack
₹47,185.00 Original price was: ₹47,185.00.₹44,800.00Current price is: ₹44,800.00.
-
Polar patterns: Cardioid, omnidirectional, figure-of-eight
-
Filter: 3-stage (linear, 75Hz, 150Hz)
-
Pad: 3-stage (0dB, -10dB, -20dB)
-
Frequency response: 20Hz – 20kHz
-
Sensitivity: 16mV/Pa -36dB ±2dB
-
(0dB = 1V/Pa @ 1,000Hz)
-
Impedance: ≤200 Ohms
-
Equivalent noise level: 18dB
-
(A-weighted)
-
Max SPL (for 0.5% THD @ 1kHz): 125dB
-
Power: Phantom power 48V required
-
Connector: 3-pin XLR (cable included)
-
Dimensions: 194 x 53 x 53mm
-
Weight: 618g (818g with shockmount)
SONTRONICS STC-3X PACK 3-pattern mic & accessories
Our Sontronics STC-3X PACK is an all-in-one microphone and accessories package, together representing the ideal solution for achieving professional-quality recordings at home or in the studio.
Our British-designed STC-3X microphone is a multi-pattern condenser featuring the three most commonly used polar patterns – cardioid, omnidirectional and figure-of-eight. These are selectable using a simple switch on the rear of the mic.
The STC-3X boasts a dual one-inch, gold-sputtered diaphragm housed in a large, open grille and its filter and pad controls make it a versatile, flexible workhorse in any recording situation.
In fact, thanks to its three-stage pad and three-stage filter as well as its three polar patterns and bundled accessories, the Sontronics STC-3X mic is a best-seller into education.
You must be logged in to post a review.
Related products
-
Sontronics ARIA
₹152,985.00Original price was: ₹152,985.00.₹148,000.00Current price is: ₹148,000.00.Add to cart- Frequency response: 20Hz – 20kHz
- Sensitivity: 18mV/Pa -33dB ±1.5dB
- (0dB = 1V/Pa @ 1,000Hz)
- Polar pattern: Cardioid
- Pad: 0, -10dB
- Filter: Linear, 75Hz
- Impedance: ≤200 Ohms
- Equivalent noise level: 18dB
- (A-weighted)
- Max SPL (for 0.5% THD @ 1kHz): 125dB
- Power supply: SPS-2 115/230V
- *Phantom power NOT required*
- Connector: 8-pin connector (mic),
- 3-pin XLR-M (power supply)
- Dimensions: 230 x 55 x 55mm (mic)
- Weight: 744g (mic), 1155g (mic with shockmount), 1880g (power supply)
- Comes with: wooden box (for Aria mic), shockmount, cables, SPS-2 power supply, aluminium flightcase
-
Sontronics DELTA 2
₹101,540.00Original price was: ₹101,540.00.₹98,000.00Current price is: ₹98,000.00.Add to cart- Polar pattern: Figure-of-eight
- Frequency response: 20Hz – 15kHz
- Sensitivity: 6mV/Pa -45dB ±1dB(0dB = 1V/Pa @ 1,000Hz)
- Impedance: ≤200 Ohms
- Equivalent noise level: 10dB(A-weighted)
- Max SPL (for 0.5% THD @ 1kHz): 140dB
- Power: Phantom power 48V required
- Connector: 3-pin XLR
- Dimensions: 164 x 72 x 35mm
- Weight: 470g (906g with shockmount)
- Comes with: shockmount, flightcase
-
Sontronics Drum Pack Plus
₹116,240.00Original price was: ₹116,240.00.₹113,000.00Current price is: ₹113,000.00.Add to cart-
Polar pattern (all mics): Cardioid
-
Pad: 0/-15dB (DM-1B), 0/-10dB (DM-1S, DM-1T & STC-10)
-
Filter (STC-10 only): Linear/75Hz
-
Freq. response: 20Hz – 20kHz (DM-1B), 30Hz – 20kHz (DM-1S & 1T, STC-10)
-
Sensitivity: 6mV/Pa -45dB ±2dB (DM-1B),
-
8mV/Pa -42dB ±2dB (DM-1S & 1T),
-
11mV/Pa -39dB ±2dB (STC-10)
-
Impedance (all mics): ≤200 Ohms
-
Equivalent noise level (A-weighted): 14dB (DM-1B, 1S & 1T), 18dB (STC-10)
-
Max. SPL*: 155dB (DM-1B), 135dB (DM-1S & 1T), 130dB (STC-10)
-
Power sources (all mics): 48V ±4V phantom power required
-
Connector (all mics): 3-pin XLR
-
Dimensions: 144 x 72 x 72mm (DM-1B),
-
91 x 22 x 22mm (DM-1S & 1T),
-
150 x 21 x 21mm (STC-10)
-
Weight: 829g (DM-1B), 86g (DM-1S & 1T), 125g (STC-10)
-
-
Audio-Technica ATR1300X
₹4,248.00Original price was: ₹4,248.00.₹2,700.00Current price is: ₹2,700.00.Add to cartEngineered for durability, reliability, and excellent speech intelligibility, the ATR1300x unidirectional dynamic microphone offers professional sound quality for the live performer. The mic’s directional polar pattern keeps the pickup focused on the sound source, helping to prevent feedback. It features rugged metal construction, an on/off switch, and a detachable 5 m (16.5′) cable (XLR to 1/4″ plug) designed to work with live/studio mixers and sound systems. A great choice for competitive karaoke singers and other aspiring vocalists, the ATR1300x comes with an adjustable microphone stand clamp.















Reviews
There are no reviews yet.