Category
- ACCESSORIES
- AUDIO INTERFACES
- BOSS
- brass and wood winds
- DJ CONTROLLERS
- DRUMS & PERCUSSION
- EFFECTS PROCESSOR
- GUITAR
- KEYBOARDS
- OTHER
- PIANO
- SPEAKER
- STOCK CLEARANCE SALE
- STUDIO/ RECORDING
- VIOLINS

Sontronics DELTA 2
₹101,540.00 Original price was: ₹101,540.00.₹98,000.00Current price is: ₹98,000.00.
- Polar pattern: Figure-of-eight
- Frequency response: 20Hz – 15kHz
- Sensitivity: 6mV/Pa -45dB ±1dB(0dB = 1V/Pa @ 1,000Hz)
- Impedance: ≤200 Ohms
- Equivalent noise level: 10dB(A-weighted)
- Max SPL (for 0.5% THD @ 1kHz): 140dB
- Power: Phantom power 48V required
- Connector: 3-pin XLR
- Dimensions: 164 x 72 x 35mm
- Weight: 470g (906g with shockmount)
- Comes with: shockmount, flightcase
SONTRONICS DELTA 2 phantom-powered ribbon mic for guitar amps & brass
A decade after we launched the world’s first ribbon microphone designed specifically to handle higher SPL sources, its successor, the Sontronics DELTA 2, has arrived. The original DELTA, along with our HALO dynamic mic for guitar amps, has become a must-have for many studios and live guitarists, from Bernard Butler to Radiohead’s Ed O’Brien, from Steve Stevens to Aerosmith, and when it comes to build quality and perfect sound reproduction, the new DELTA 2 turns the dial up to 11!
Like the original, DELTA 2 is not only the perfect partner for guitar amplifiers but also ideal for use with other high-SPL sources, such as trumpet, trombone and tenor sax. Compared to our SIGMA 2, DELTA 2’s reduced sensitivity enables it to capture incredibly powerful signals without overloading its internal preamp circuit. Its rugged build and multi-layer baffling make it ready for life on the road as well as in the studio.
“”DELTA is stunning… it’s a fantastic-sounding mic.
It sounded great, right in front of the speaker with no EQ. If it sounds good coming out of the amp, DELTA will translate that perfectly, in 3D clarity. “”
STEVE STEVENS, Guitarist/Songwriter (Billy Idol, Terry Bozzio, Michael Jackson)
DELTA 2 sounds even more stunning than the original, capturing amazing clarity and detail in the higher frequencies, together with astonishingly powerful mid and low tones.
The DELTA 2 does an incredible job of capturing every element of your guitar sound, whether you’re recording solo parts in the studio or miking up your amp on stage. DELTA 2 captures the true tone of whatever instrument you’re recording, allowing it to sit perfectly in the mix without requiring excessive gain or EQ.
Hand-built in the our Sontronics HQ and featuring our own unique circuitry, the DELTA 2 boasts UK-made electronics including a custom-wound premium-quality transformer (made in our hometown of Poole, England), and the same excellent ribbon motor as the original DELTA.
The electronics uniquely incorporate RFI (radio frequency interference) filters that filter out unwanted radio frequencies, making DELTA 2 (and our other ribbon mics) even more suited to live use than before. Ours are the only ribbon mics in the world to boast this feature!
Like all Sontronics microphones, DELTA 2 is protected by our LIFETIME WARRANTY, although the ribbon element itself is not, as it is subject to varying levels of wear and tear depending on how it is used. If your ribbon starts to stretch or become damaged in any way, we can arrange a replacement via your local Sontronics service centre or directly with us at Sontronics HQ in England. Contact us for more details.
DELTA 2 HIGHLIGHTS
• phantom-powered ribbon mic
• made in the UK
• designed to handle high SPL
• rugged build
• gives great results both live and in the studio
• unique Sontronics shockmount
• LIFETIME WARRANTY
You must be logged in to post a review.
Related products
-
Lauten Audio LS-308 V2
₹70,495.00Original price was: ₹70,495.00.₹66,000.00Current price is: ₹66,000.00.Add to cartThe Large-diaphragm Condenser for Challenging Environments The Lauten Audio LS-308 is a noise-rejecting, high-dynamic-range, large-diaphragm condenser microphone that’s a real problem-solver in challenging scenarios where isolation is desired but difficult to achieve. Featuring a second-order cardioid polar pattern with 270 degrees of off-axis frequency rejection and ultra-high dynamic range, the LS-308 is designed for use …
-
Sontronics MERCURY
₹220,355.00Original price was: ₹220,355.00.₹215,000.00Current price is: ₹215,000.00.Add to cart- Polar pattern: Sweepable from omni to figure-of-eight & everything in between
- Frequency response: 20Hz – 20kHz
- Pad: 0, -10dB
- Filter: Linear, 75Hz
- Sensitivity: 18mV/Pa -33dB ±1.5dB (0dB = 1V/Pa @ 1,000Hz)
- Impedance: ≤200 Ohms
- Equivalent noise level: <12dB (A-weighted)
- Max SPL (for 0.5% THD @ 1kHz): 125dB
- Power: 115/230V *phantom power NOT required*
- Connector: 8-pin connector (mic),
- 3-pin XLR-M (power supply)
- Dimensions: 250 x 90 x 80mm
- Weight: 2317g (mic only)
- Comes with: wooden box (for Mercury mic), shockmount, cables, power supply, aluminium flightcase
-
Sontronics Voicecasting Pack Red
₹30,480.00Original price was: ₹30,480.00.₹28,500.00Current price is: ₹28,500.00.Add to cartThe new SONTRONICS Voicecasting Pack features our multi-award-winning Podcast Pro microphone, packed together with our best-selling Elevate stand and cables. Together they make an amazing-value package that will have you recording, broadcasting or streaming in seconds. Hand-built in the UK, Podcast Pro has become a must-have for podcasters, radio presenters, voiceover artists, gamers and musicians …
-
Sontronics Drum Pack Plus
₹116,240.00Original price was: ₹116,240.00.₹113,000.00Current price is: ₹113,000.00.Add to cart-
Polar pattern (all mics): Cardioid
-
Pad: 0/-15dB (DM-1B), 0/-10dB (DM-1S, DM-1T & STC-10)
-
Filter (STC-10 only): Linear/75Hz
-
Freq. response: 20Hz – 20kHz (DM-1B), 30Hz – 20kHz (DM-1S & 1T, STC-10)
-
Sensitivity: 6mV/Pa -45dB ±2dB (DM-1B),
-
8mV/Pa -42dB ±2dB (DM-1S & 1T),
-
11mV/Pa -39dB ±2dB (STC-10)
-
Impedance (all mics): ≤200 Ohms
-
Equivalent noise level (A-weighted): 14dB (DM-1B, 1S & 1T), 18dB (STC-10)
-
Max. SPL*: 155dB (DM-1B), 135dB (DM-1S & 1T), 130dB (STC-10)
-
Power sources (all mics): 48V ±4V phantom power required
-
Connector (all mics): 3-pin XLR
-
Dimensions: 144 x 72 x 72mm (DM-1B),
-
91 x 22 x 22mm (DM-1S & 1T),
-
150 x 21 x 21mm (STC-10)
-
Weight: 829g (DM-1B), 86g (DM-1S & 1T), 125g (STC-10)
-


















Reviews
There are no reviews yet.