Roland Xps-30 (Red)
₹84,922.00 Original price was: ₹84,922.00.₹76,430.00Current price is: ₹76,430.00.
- KEYBOARD
- Keyboard
- 61 keys (with velocity)
- SOUND GENERATOR
- Maximum Polyphony
- 128 voices
- Parts
- 16 parts
- Preset Memory
- – Patches: Over 1400
– Drum kits: Over 35
– Performances: 28
* GM2 compatible sounds are included. - User Memory
- – Patches: 256
– Drum kits: 8
– Performances: 128
– Favorites: 100 - Wave Expansion Slots
- 1 slot
* The wave expansion slot is rewritable internal waveform memory. You can download data from the Axial sound library site and write it via a USB flash drive into the XPS-30’s internal wave memory (slot). - SAMPLE IMPORT FUNCTION
- File Format
- Audio file: WAV (44.1 kHz, 16 bits)
Supports multi-sample (System Program Ver. 2.00 or later, with JUNO-DS Tone Manager) - Effects
- – Multi-effects: 3 systems, 80 types
– Chorus: 3 types
– Reverb: 5 types
– Mic input reverb: 8 types - AUDIO FILE PLAYER SECTION
- File Format
- Audio file: WAV, AIFF, MP3
- OTHERS
- Rhythm Pattern
- Preset: 30 groups x 8
- Arpeggio
- Preset: 128
- Controllers
- Pitch bend/Modulation lever
Control knob x 4
Level slider x 4
Multicolor pad x 8 - Display
- Graphic LCD 256 x 80 dots
- External Storage Device
- USB flash drive (supports USB 2.0 Hi-Speed flash memory)
- Connectors
- PEDAL HOLD jack
PEDAL CONTROL jack
MIC INPUT jack: 1/4-inch phone type
EXT INPUT jack: stereo miniature phone type
OUTPUT jacks (L/MONO, R): 1/4-inch phone type
PHONES jack: stereo 1/4-inch phone type
MIDI connectors (IN, OUT)
USB MEMORY port
USB COMPUTER port (supports USB MIDI/AUDIO)
DC IN jack - Power Supply
- DC 9 V: AC adaptor or rechargeable Ni-MH battery (AA, HR6) (sold separately) x 8
* Battery life for continuous use (differs depending on the conditions of use)
Rechargeable nickel metal hydride batteries: approximately 5 hours (when using batteries having a capacity of 1900 mAh) (approximately 4 hours if USB flash drive is connected)
* Carbon-zinc or alkaline batteries cannot be used. - Current Draw
- 600 mA
- Accessories
- Owner’s manual
Leaflet “USING THE UNIT SAFELY”
AC adaptor
Power cord - Options (sold separately)
- Keyboard stand (*1): KS-18Z, KS-12
Pedal switch: DP series
Expression pedal: EV-5
USB flash memory (*2)*1 When using the KS-18Z, ensure that the height of the unit is one meter or lower.
*2 Use USB Flash Memory (supports USB 2.0 Hi-Speed Flash Memory) sold by Roland. We cannot guarantee operation if other products are used. - SIZE AND WEIGHT
- Width
- 1,008 mm
39-11/16 inches - Depth
- 300 mm
11-13/16 inches - Height
- 97 mm
3-7/8 inches - Weight (excluding AC adaptor)
- 5.3 kg
11 lbs. 12 oz.
- Mobile performance keyboard with pro sounds, enhanced features, and battery-powered operation
- Includes all the sounds from the popular XPS-10 and JUNO-Di, plus updated acoustic and electric pianos and additional regional sounds
- Wave expansion slot enables users to download new sound waveforms, available for free at Roland’s Axial website
- Sample import function with twice the memory capacity of the XPS-10
- Version 2.00 software supports multi-sample import for professional sound creation
- Large graphic display and hands-on knobs/sliders for easy navigation and editing
- Eight Phrase Pads for triggering samples and audio songs stored on USB memory
- Mic input and dedicated Reverb, Vocoder, and Auto Pitch effects for impressive vocal performances
- Intuitive eight-track pattern sequencer with non-stop recording for quickly developing song ideas
- USB audio/MIDI and DAW Control mode
- JUNO-DS Tone Manager and Librarian allow editing and managing the keyboard’s onboard sounds from your computer
-
Mobile and Ready to Perform
Easy to carry and easy to use, the XPS-30 is an ideal keyboard for performing musicians. It’s filled with ready-to-play sounds like pianos, organs, strings, brass, and synths, plus authentic local sounds from around the world. And with its ability to run on batteries or AC power, you’re able to take the XPS-30 anywhere you want to play.
-
High-Quality Pianos and Regional Sounds
Gigging keyboardists rely on acoustic and electric pianos more than any other sounds, and these essentials have been newly enhanced in the XPS-30 for improved tone and response. In addition, the regional instrument selection has been expanded, providing even more versatility for local playing. The complete sound sets from the XPS-10 and JUNO-Di are also included, and patches from those keyboards are fully compatible with the XPS-30.
-
Deep Editing and Real-Time Controls
With its intuitive, instant-access design, the XPS-30 makes it simple to call up excellent sounds on the spot. But if you like to customize things, you can dive deeper and tweak patches and performances with detailed precision. The front panel also includes numerous hands-on knobs and sliders for creating patches and adjusting sounds while performing, while the rear panel features jacks for connecting hold and expression pedals for further real-time control.
-
Get even more creative with Wave Expansion and multi-sample import
To complement its impressive onboard sound set, the XPS-30 supports internal waveform expansion via USB for unlimited tonal range. Over 1000 EXP sounds are available for free download at Roland’s Axial website, including top-quality acoustic piano collections, world instruments, go-to studio standards, percussion, loops, and more. If don’t find what you need there, it’s even possible to load in WAV sounds from your personal library and play them from the keyboard. Version 2.00 software supports multi-sample import for rich and expressive sounds, along with the creation of custom drums and percussion kits. Out of the box, the XPS-30 comes with the versatile EXP-06 Studio Collection preloaded in the wave expansion slot.
-
Phrase Pads for Triggering Songs and Samples
The XPS-30 is equipped with eight Phrase Pads (two more than the XPS-10), allowing you to supplement your keyboard performances with samples or music files stored on USB memory. Just load up the pads with whatever you like—one-shot samples, vocals, sound effects, loops, or complete music tracks—and trigger them with a quick touch when needed.
-
Mic Input with Vocoder and Auto Pitch
If you’re a solo performer or singer/songwriter, you’ll love the XPS-30’s mic input, which lets you get great vocal sounds without having to carry around extra gear. There’s a dedicated vocal reverb, plus Auto Pitch for singing with the popular “stepped” electronic vocal effect heard in a lot of modern music. The built-in vocoder is big fun too, allowing you to sing into a mic and control the tone and pitch via sounds played on the keyboard.
-
Eight-Track Pattern Sequencer
When you have an idea for a song or beat, you can easily capture and develop it with the onboard pattern sequencer. The intuitive, non-stop operation won’t interrupt your creative flow, letting you build up full arrangements with multiple sounds in no time. The sequencer is also perfect for enhancing live performances with pre-made backing and on-the-fly looping.
-
Music Production Partner
The XPS-30 is not only great on stage—it works great for computer music production as well. The integrated USB interface provides a solid front end for a mobile or studio recording setup, allowing you to record MIDI and audio data, including sounds from the mic input. There’s even a dedicated DAW Control mode for controlling your music software from the XPS-30’s front panel.
You must be logged in to post a review.
Related products
-
Korg Nautilus 61 61-key Synthesizer Workstation
₹250,000.00Original price was: ₹250,000.00.₹215,000.00Current price is: ₹215,000.00.Add to cartSystem, Keyboard
- System
- NAUTILUS System Version 1.0
- Keyboard
- 88 key: RH3 (Real Weighted Hammer Action 3), A – C
73 key: Natural Touch Semi Weighted, C – C
61 key: Natural Touch Semi Weighted, C – C
Velocity sensitive is supported, after touch is not supported.
Tone Generator
- Synthesis Types
- 9
SGX-2: Premium Piano (Acoustic Piano)
EP-1: MDS Electric Piano (Electric Piano)
HD-1: High Definition Synthesizer (PCM)
AL-1: Analog Synthesizer (Analog Modeling)
CX-3: Tonewheel Organ (Tonewheel Organ Modeling)
STR-1: Plucked String (Physical Modeling)
MOD-7: Waveshaping VPM Synthesizer (VPM Synthesis)
MS-20EX: Component Modeling Technology (Analog Modeling)
PolysixEX: Component Modeling Technology (CMT Analog Modeling)
- Maximum Polyphony*1*2
- SGX-2: 100 voices*3
EP-1: 104 voices
HD-1: 140 voices
AL-1: 80 voices
CX-3: 200 voices
STR-1: 40 voices
MOD-7: 52 voices
MS-20EX: 40 voices
PolysixEX: 180 voices1: In rare cases, when a large number of processor-intensive effects are active simultaneously (for instance, more than 14 O-Verbs), polyphony may be slightly reduced.
*2: A portion of the multicore processor in NAUTILUS is devoted to generating voices, and a separate portion is devoted to generating effects. NAUTILUS dynamically allocates the voice processing power between the engines as necessary. The quoted maximum numbers of voices apply when 100% of the voice processing power is devoted to a single engine.
*3: 100 dual-stereo notes (equivalent to 400 mono voices)
- Preset PCM
- RAM 496 MB / DISK 2.3G (ROM 1,771 Multisamples, 3,955 Drumsamples)
- Build-in Expansion PCM Libraries
- EXs301: German2 D Piano
EXs302: Italian F Piano
EXs303: Japanese Upright U Piano
EXs304: Prepared Piano
EXs305: Historical Keyboards
EXs306: Vintage Keyboards 2
EXs307: Strings & Synths
EXs308: Guitar Collection
EXs309: Bass Collection
EXs310: World Essence
EXs311: Background Loops
EXs312: SFX & Hits
EXs313: Found Percussions
EXs314: Expansion Drums
- PCM RAM Capacity
- Approx. 2GB *4
*4: The memory available for Sampling Mode will change based on the use of Expansion PCM libraries and User Sample Banks. Approx. 260 MB is available when shipped from the factory (When loading the file named “PRELOAD.KSC”).
- Wave Sequences
- 598 User memory, 377 Preload
Support for stereo multisamples, synchronization of individual notes, and tempo-based settings.
SGX-2 Program
- Premium Piano
- Full key stereo sampling, Chromatically sampled at up to 12 velocity levels, no looping.
Damper resonance and mechanical noise are reproduced.
Una Corda sample support
- PCM
- EXs301 – German2 D Piano
12 velocity levels, includes Ambience Piano type/samplesEXs302 – Italian F Piano
12 velocity levels, no Una Corda samplesEXs303 – Japanese Upright U Piano
8 velocity levelsExs304 – Prepared Piano
1-4 velocity levels
- Piano Type
- 128
(With the factory settings, the 64 varieties of EXs6: German D Piano, EXs7: Japanese C Piano, EXs12: SGX-1 Austrian D Piano, EXs17: Berlin D Piano do not produce sound. The options must be downloaded. (Those will be released at a later date.))
- Oscillator Control
- Damper Resonance
Damper Noise
Mechanical Noise
Note Release
String Resonance
Una Corda
EP-1 Program
- MDS Electric Piano
- Tine and reed-type electric pianos powered by Multi-Dimensional Synthesis (MDS), and vintage effects.
- Electric Piano Model Types
- 7
Tine EP I Early, Tine EP I Late, Tine EP II, Tine EP V, Tine EP DMP, Reed EP200, Reed EP200A
- Oscillator Control
- Harmonic Sound Level, Attack Noise, Level, Release Noise Level, Attack Brightness, Hammer Width
- Panel Control
- Tine Type
Preamp Volume, Tone (Treble, Bass), Vibrate (On/Off, Intensity, Speed), Amp/Cabinet (On/Off, Drive)Reed Type
Preamp Volume, Tone (Treble, Bass), Vibrate (Intensity, Speed), Amp/Cabinet (On/Off, Drive)
- Effect Types
- 9
Small Phase, Orange Phase, Black Phase, Vintage Chorus, Black Chorus, EP Chorus, Vintage Flanger, Red Comp, VOX Wah
HD-1 Program
- Advanced Vector Synthesis
- Control oscillator volumes and synthesis & effects parameters via the Vector Joystick and the tempo-synchronized Vector Envelope.
- Structure
- Single: only OSC1, Double: OSC1 and OSC2.
Double mode lets you layer two completely separate synth voices, each with their own velocity-switched oscillator, dual filter, EGs, LFOs, etc.
Drums: One drum kit, Double Drums: Two drum kits.
- Oscillators
- 8 velocity zones per oscillator, with switching, crossfades and layering
Each zone can play mono or stereo Multisamples or Wave Sequences
- Filters
- Two multi-mode filters per voices (low-pass, high-pass, band-pass and band-reject), Four-mode filter routings (single, serial, parallel and 24dB mode)
- Driver
- Per voice non-linear driver and low boost circuit
- EQ
- Three bands, with sweep-able mid
- Modulation
- Three envelope generators, two LFOs per voice, common LFO, four key tracking generators, AMS (Alternate Modulation Source), two AMS mixers
- Quick Layer / Split function
EXi Program Common
- Advanced Vector Synthesis
- Control oscillator volumes and synthesis & effects parameters via the Vector Joystick and the tempo-synchronized Vector Envelope
- Modulation
- Common Step Sequencer, AMS (Alternate Modulation Source), Common LFO, 2 Key Tracking Generators
- EQ
- Three bands, with sweep-able mid
- Quick Layer / Split function
AL-1 Program
- Oscillators
- Ultra-low-aliasing oscillators, OSC1, OSC2, Sub-oscillator and noise generator; ring modulation, FM and Sync
- Audio Input
- External audio can be processed through the ring modulator, filter, driver, amp, and EQ
- Filters
- Two multi-mode filters (low-pass, high-pass, band-pass and band-reject) with four types of filter routings (single, serial, parallel and 24dB mode), Multi Filter mode (only Filter-A; modulatable mix of Low Pass, High Pass, Band Pass, and dry input, for creating a wide variety of unique filter types and effects)
- Driver
- Per-voice non-linear driver and low boost circuit
- Modulation
- Five Envelope generators, four per-voice LFOs, two AMS Mixers; Per-voice Step Sequencer
CX-3 Program
- Tonewheel Organ Modeling
- Phase-synchronous tonewheels (clean and vintage modes), percussion, key click, wheel brake
- EX Mode
- Four additional, user-specified drawbars, and expanded percussion
- Internal Effects
- Rotary speaker, vibrato/chorus, amp modeling with overdrive, 3-band EQ
- Drawbar Control
- Controlled via nine front-panel sliders (via Tone Adjust)
- Split
- Upper, Lower (even in EX mode)
- Modulation
- Two AMS mixers
STR-1 Program
- Physically Modeled String
- Includes physically modeled damping, decay, dispersion, nonlinearity, harmonics, dual pickups, and more. Most string parameters can be controlled in realtime
- String Excitation
- Three independent excitation sources can be used simultaneously: Pluck, Noise, and PCM. 16 preset “pluck” types, with modulatable width and randomization. Noise generator with saturation and dedicated low pass filter
PCM Oscillator
KORG’s ultra-low-aliasing technology, as introduced in the HD-1; 4 velocity zones per oscillator; Uses any mono Multisamples, including ROM, EXs, User Sample Bank, or Sampling Mode. Supports Virtual Memory.Excitation Filter
Dedicated 2-pole multimode filter for shaping the string excitation. Filter can be enabled/disabled separately for each excitation source. Low Pass, High Pass, Band Pass, and Band Reject modes
- Audio Input and Feedback
- Run real-time audio through the string, including feedback through effects. Modeled feedback includes modulate-able instrument-to-amp distance and orientation
- Filters
- Dual multi-mode filters per voice; Single, Serial, Parallel (with split stereo output), and 24dB (4-pole) configurations. Low Pass, High Pass, Band Pass, and Band Reject modes
Multi Filter Mode (Filter A only)
Modulatable mix of Low Pass, High Pass, Band Pass, and dry input, for creating a wide variety of unique filter types and effects
- Modulation
- 5 Envelopes, 4 per-voice LFOs, 2 Key Track generators, String Tracking generators, 4 AMS Mixers
MOD-7 Program
- Waveshaping VPM Synthesizer
- Combines Variable Phase Modulation (VPM), Waveshaping ring modulation, PCM sample playback, and subtractive synthesis; Able to convert-load SYX files
- Oscillators
- 6 VPM/Waveshaper/Ring Modulation Oscillators
Phase and modulatable pitch per oscillator. 101 Waveshaper tables plus modulatable Drive and Offset. Use as oscillators, or as Waveshapers or Ring Modulators for other signalsPCM Oscillator
KORG’s ultra-low-aliasing technology, as introduced in the HD-1. 4 velocity zones per oscillator.Uses any mono Multisamples, including ROM, EXs, User Sample Bank, or Sampling Mode. Supports Virtual MemoryNoise Generator (With saturation and low-pass filter function)
- Audio input
- Run real-time audio through the VPM Oscillators and filters.
- Filters
- Dual multi-mode filters per voice. (Low Pass, High Pass, Band Pass, and Band Reject modes) , Two types of filter looping (Parallel and 24 dB “4-Pole”)
Multi Filter mode (Filter A only)
Modulatable mix of Low Pass, High Pass, Band Pass, and dry input, for creating a wide variety of unique filter types and effects
- Patch Panel
- Supports both preset algorithm (78 types) selection and free patching.Three 2-in, 1-out mixers for scaling and merging audio, fully modulatable, with phase inversion. Main 6-input stereo mixer, with modulatable pan and volume, plus phase inversion
- Modulation
- 10 Envelopes, 4 per-voice LFOs, 9 Key Tracking generators, Per-voice Step Sequencer, 4 standard AMS Mixers plus 4 simple AMS Mixers
MS-20EX Program
- Oscillators
- Ultra-low-aliasing oscillators; VCO1, VCO2, Ring Mod, Pink and White Noise Generator
- Audio Input
- Run real-time audio through the synthesis engine and ESP (External Signal Processor)
- Filters
- 12dB/octave High Pass and Low Pass self-resonant filters
ESP section
24dB/octave Low Cut and High Cut filters, available per voice.
- Patch Panel
- Patchable audio and modulation, at audio rates
- Patch Points
- Keyboard
Keyboard CV Out, Keyboard Trigger Out, VCO1+VCO2 CV In, VCO2 CV InVCO
VCO1+VCO2 External Frequency Control In, VCO1 Out, VCO2 OutVCF
External Signal In, External HP Filter Cutoff Frequency Control In, External LP Filter Cutoff Frequency Control In, HPF Out, LPF In, LPF OutVCO+VCF
Total External Modulation InVCA
External Initial Gain Control In, VCA InEG
EG1 Envelope Signal Normal Out, EG1 Envelope Signal Reverse Out, EG1+EG2 Trigger In, EG1 Trigger In, EG2 Envelope Signal Reverse OutMG
Triangle Out, Rectangle OutNoise Generator
Pink Noise Out, White Noise OutSample and Hold
Clock Trigger In, Sample Signal In, S/H OutModulation VCA
Control Voltage In, Signal In, Signal OutManual Controller
Control Wheel Out, Momentary SwitchESP
Signal In, AMP Out, BPF In, BPF Out, F-V CV Out, Envelope Out, Trigger OutOthers
EXi Audio In, Mixer 1 In, Mixer 1 Out, Mixer 2 In, Mixer 2 Out
- ESP (External Signal Processor):
- Use incoming audio as a trigger and/or CV source
- Modulation
- Original DAR (Delay, Attack, Release) and HADSR (Hold, Attack, Decay, Sustain, Release) EGs 1 &2, Original MG (with MIDI sync), Sample-and- Hold, MVCA, NAUTILUS: 4 additional multi-stage Envelopes, 4 additional per-voice LFOs, and 4 AMS Mixers.
PolysixEX Program
- Oscillators
- VCO
Saw, Pulse, PWMSub Oscillator:
Off, 1 octave below, 2 octaves below
- Filter
- 24dB(4-Pole) Octave Low Pass self-resonant filter
- Effects
- Integrated Polysix Chorus, Phaser, and Ensemble
- Arpeggiator
- Integrated MIDI-synced arpeggiator, with adjustable Range, Mode, and Latch
- Modulation
- Polysix
Original ADSR EG and MG (with MIDI sync).NAUTILUS
2 additional multi-stage Envelopes, 2 additional per-voice LFOs, and 4 AMS Mixers.
Combination
- Number of Timbres, Master Keyboard Functionality
- 16 Maximum
Keyboard and velocity splits, layers, and crossfades of up to 16 Programs and/or external MIDI Devices
The tone adjust parameter function lets you modify program settings, and the master keyboard function lets you control external MIDI devices
- Advanced Vector Synthesis
- Control oscillator volumes and synthesis & effects parameters via the Vector Joystick and the tempo-synchronized Vector Envelope
- Quick Layer / Split function
Drumkit
Assignable stereo/mono samples with 8 velocity zones per oscillator (with crossfade functions)Number of Programs/Combinations/Drum kits
- User Memory Programs
- 2,560 (1,920 [1,280 HD-1+640 EXi] come preloaded)
- User Memory Combinations
- 1,792 (256 come preloaded)
- User Memory Drum Kits
- 264 (104 come preloaded)
- 256 GM Level2 preset programs + 9 GM Level 2 drum preset programs
Set List
- Number of Set Lists/Slots
- 128 set lists, 128 slots per set list
Each set list provides a 9-band graphic EQ, and a Tone Adjust function that allows program settings to be adjusted
Transpose setting
Hold Time setting of Smooth Sound Transition (SST) supported for each slot
Sampling
- System
- Open Sampling System (resampling, In-Track sampling)
- Bit Depth/Sampling Frequency
- RAM
16-bit/48 kHz stereo/mono samplingDISK
16 or 24-bit/48 kHz
- Sampling Time
- RAM
Depends on the amount of available PCM RAMDISK
Maximum 80 minutes stereo (879MB: 16bit)
- Sample Locations
- 16,000 samples/4,000 multisamples (128 indexes per multisample)
- Formats
- KORG format, AKAI S1000/S3000 data (with advanced Program parameter conversion); SoundFont 2.0, AIFF, and WAVE formats
- Editing
- Time Stretch, Time Slice, Crossfade Loop, and other standard editing features.
Effects
- Insert Effects
- 12
Stereo in / stereo out
- Master Effects
- 2
Stereo in / stereo out
- Total Effects
- 2
Stereo in / stereo out
- Timbre EQ
- One 3-band EQ for each timbre/track
- Effect Types
- 197
- Modulation
- Dynamic Modulation and Common LFO
- Effects Control Busses
- Stereo side-chaining for compressors, gates, vocoders, etc
- Effect Presets
- Total 783 preset, Maximum 32 per 1 effect (Preset User)
Arpeggiator
- Arpeggiator Modules
- One module in Program mode, two modules in Combination and Sequencer modes
- Arpeggio Pattern
- 5 presets + ARP A 2,048 slots (1,593 come Preload) + ARP B 128 slots
- Controllers
- On/Off, Latch, Gate, Velocity, Length, Swing, Tempo
Drum Track
- Preset Patterns
- 1,272 (common with the preset patterns of the MIDI sequencer)
- User Patterns
- 1,000
Patterns created in Sequencer mode can be converted to drum track user patterns.
- Trigger Mode/ Sync / Zone / Swing, Drum SD, Tempo settings can be specified.
Sequencer / HDR
- Tracks
- 16-track MIDI sequencer + 16-track hard disk recorder + 1 master track.
- Number of Songs
- 200
- Resolution
- 1/480
- Tempo
- 40.00 – 300.00 (1/100 BPM resolution)
- Maximum Memory
- 400,000 MIDI events or 300,000 audio events
- MIDI Tracks
- 16 tracks plus the master track, 697 preset / 100 user patterns (per song), 18 preset/16 user template songs,
- Audio Tracks
- 16-track playback, 4-track simultaneous recording, WAV file format 16bit/24bit
Maximum Single-file Recording Time (mono): 80 minutes
Automation: Volume, Pan, EQ, and Send1/2
10,000 regions (max.)
Event Anchors, BPM Adjust
- Other Functions
- RPPR (Realtime Pattern Play and Record): 1 Pattern set per song
General
- Disk Mode
- Load, save, utility, data filer function (save/load MIDI System Exclusive data), CD-R/RW (UDF format read/write), ISO9660 Level 1.
- Controllers
- Joystick, Switches 1 & 2
Arpeggiator Control: On/Off, Latch, Gate, Velocity, Length, Swing, Tempo
DRUM TRACK: On/Off, Swing, Drum SD, Tempo
- Display
- TouchView graphical user interface, 7 inch color TFT, WVGA (800 x 480 dots), adjustable brightness
- Principal Specifications
- Frequency Response
20Hz-22kHz, +/-1.0dB, 10k Ω loadTHD+N
20Hz-22kHz, 0.01%, 10k Ω load (typical)S/N
95dB (typical)Dynamic Range
95dB (typical)Crosstalk
95dB, at 1kHz (typical)
- Outputs
- L/MONO, R, Individual 1-4
1/4” TRS Balanced
Output Impedance: 350 Ω Stereo; 175 Ω Mono (L/MONO Only),
Nominal Level: +4.0 dBu,
Maximum Level: +16.0 dBu (when load impedance is 600 Ω or greater)
MAIN VOLUME slider controls only AUDIO OUTPUT (MAIN) L/MONO and RHeadphones
1/4” stereo phone jack
Output impedance: 33 Ω,
Maximum Level: 60+60 mW (when load impedance is 33 Ω),
MAIN VOLUME knob (link with AUDIO OUTPUT (MAIN))USB-B
24-bit, Sample Rate: 48 kHz, 2 channels
(Digital output of the same signals as AUDIO OUTPUT (MAIN) L/MONO and R)
- Inputs
- Audio Inputs 1 and 2
1/4” TRS Balanced
Input Impedance: 10 kΩ
Nominal Level: LINE +4 dBu
Maximum Level: LINE +16 dBu
Nominal Level: MIC –22 dBu
Maximum Level: MIC -10 dBu
Source Impedance: 600 ΩUSB-B
24-bit, Sample Rate: 48 kHz, 2 channels
- Control Inputs
- Damper pedal (half damper supported)
Assignable switch, Assignable pedal
- MIDI
- In, Out, Thru
- USB
- USB A (TYPE A)
For connection to external USB devices (QWERTY keyboards, MIDI controllers, ethernet adaptors, and storage)USB B (TYPE B)
MIDI/audio interface, MIDI: 1 (16 channel) input / 1 (16 channel) output, Audio: 2 channel input / 2 channel output
*2 USB high-speed ports (supports 480Mbps)
- Disk Drives
- 60 GB SSD (2.5”)
- Power Supply
- AC power supply terminal, Power switch
- Dimensions: (W x D x H)
- 88 key: 1,437 x 387 x 139 mm / 56.57” x 15.24” x 5.47”
73 key: 1,227 x 386 x 116 mm / 48.31” x 15.20” x 4.57”
61 key: 1,062 x 386 x 116 mm / 41.81” x 15.20” x 4.57”
- Weight
- 88 key: 23.1 kg / 50.93 lbs.
73 key: 14.6 kg / 32.19 lbs.
61 key: 13.0 kg / 28.66 lbs.
- Power Consumption
- 40 W
- Accessories
- AC cord, Quick Start Guide
- Option
- XVP-20: Expression/Volume Pedal
EXP-2: Foot Controller
DS-1H: Damper Pedal
PS-1: Pedal Switch
PS-3: Pedal Switch
-
Roland FANTOM-08
₹243,064.00Add to cartStandard Features
- Sounds and features inherited from the flagship FANTOM series
- Seamless workflow with no confusing modes
- Light and durable molded body design for easy transport
- Play and produce with thousands of electronic and acoustic sounds powered by Roland’s advanced ZEN-Core and SuperNATURAL technologies
- New SuperNATURAL pianos with authentic acoustic grand sound and response
- Virtual ToneWheel Organ with harmonic bar control and quick-fire playability
- Deep onboard sampling features
- Scenes contain settings for all 16 layers plus effects and patterns
- Clip-based sequencing with instant pattern recording and triggering
- TR-REC sequencer inspired by classic Roland drum machines
- Color touchscreen, high-resolution knobs, sliders, RGB performance pads, and dedicated synth control section
- Pitch/mod lever and illuminated pitch and mod wheels
- Massive DSP power for plenty of polyphony and smooth sound transitions
- 4×32 USB audio interface and native integration with Logic Pro, MainStage, and Ableton Live
- Mic input and powerful onboard vocoder
- Support for Model Expansions, Sound Packs, Sample Packs, and more from Roland Cloud
- Comes with 15 Wave Expansions and 10 Sound Packs, available for download from Roland Cloud
- Compatible with FANTOM Scenes that use ZEN-Core, SuperNATURAL, and Virtual ToneWheel Organ sounds
- Custom 88-note keyboard with weighted action
-
Yamaha Montage6 Synthesizer Workstation with 61 Keys
₹275,990.00Read moreMontage6 Dimensions Width 1,037 mm (40-13/16″) Height 131 mm (5-3/16″) Depth 396 mm (15-9/16″) Weight Weight 15 kg (33 lbs., 1 oz.) Control Interface Keyboard Number of Keys 61 Type FSX Keyboard Initial Touch Yes Aftertouch Yes Tone generator Tone Generator Motion Control Synthesis Engine AMW2: 8 Elements FM-X: 8 Operators, 88 Algorithms Maximum Polyphony AWM2: 128 (max.; stereo/mono waveforms) FM-X: 128 (max.) Multi Timbral Capacity 16 Parts (internal), Audio Input Parts (A/D*, USB*) *stereo Part Wave Preset: 5.67 GB (when converted to 16 bit linear format), User: 1.75 GB Performance 2,707 Filter 18 types Effects Reverb x 12 types, Variation x 88 types, Insertion (A, B) x 88 types*, Master Effect x 26 types *A/D part insertion x 83 types (Preset settings for parameters of each effect type are provided as templates) Master EQ (5 bands), 1st part EQ (3 bands), 2nd part EQ (2 bands) Other Controllers Master Volume, AD Input Gain knob, Pitch Bend wheel, Modulation wheel, Ribbon Controller, Control Sliders x 8, Knobs x 8, Super Knob, Data dial Display 7″ TFT Color Wide VGA LCD touch screen Connectors [USB TO DEVICE], [USB TO HOST], MIDI [IN]/[OUT]/[THRU], FOOT CONTROLLER [1]/[2], FOOT SWITCH [ASSIGNABLE]/[SUSTAIN], OUTPUT (BALANCED) [L/MONO]/[R] (6.3 mm, Balanced TRS jacks), ASSIGNABLE OUTPUT (BALANCED) [L]/[R] (6.3 mm, Balanced TRS jacks), [PHONES] (6.3 mm, standard stereo phone jack), A/D INPUT [L/MONO]/[R] (6.3 mm, standard phone jacks) Power Consumption 27 W Accessories AC Power cord, Owner’s Manual, Cubase AI Download Information Live Sets Preset: 128 and more, User: 2,048 Performance Recorder Tracks 16 Sequence tracks, Tempo track, Scene track Recording type Real time replace, Real time overdub, Real time punch in/out Note Capacity 1 Song/Pattern: Approx. 130,000 notes, Store area: Approx. 520,000 notes (Pattern); approx. 520,000 notes (Song) Note Resolution 480 ppq (parts per quarter note) Tempo (BPM) 5 – 300 Arpeggio Parts: 8 Parts simultaneous (max.), Preset: 10,239 types User: 256 types Sequence formats MONTAGE original format, SMF formats 0, 1 Sequencer Patterns 128 patterns Pattern tracks 16 Sequence tracks Pattern Recording type Real time replace, Real time overdub Songs 128 songs Song tracks 16 Sequence tracks, Tempo track, Scene track Song recording type Real time replace, Real time overdub, Real time punch in/out Functions USB audio interface [Sampling Frequency = 44.1kHz] Input: 6 channels (3 stereo channels),Output: 32 channels (16 stereo channels) [Sampling Frequency = 44.1kHz – 192kHz] Input: 6 channels (3 stereo channels),Output: 8 channels (4 stereo channels) -
Yamaha Montage8 Synthesizer Workstation With 88 Keys
₹364,990.00Read moreMontage8 Dimensions Width 1,450mm (57-1/16″) Height 170mm (6-11/16″) Depth 460mm (18-1/8″) Weight Weight 29 kg (63 lbs., 15 oz.) Control Interface Keyboard Number of Keys 88 Type Balanced Hammer Effect Keyboard Initial Touch Yes Aftertouch Yes Tone generator Tone Generator Motion Control Synthesis Engine AMW2: 8 Elements FM-X: 8 Operators, 88 Algorithms Maximum Polyphony AWM2: 128 (max.; stereo/mono waveforms) FM-X: 128 (max.) Multi Timbral Capacity 16 Parts (internal), Audio Input Parts (A/D*, USB*) *stereo Part Wave Preset: 5.67 GB (when converted to 16 bit linear format), User: 1.75 GB Performance 2,707 Filter 18 types Effects Reverb x 12 types, Variation x 88 types, Insertion (A, B) x 88 types*, Master Effect x 26 types *A/D part insertion x 83 types (Preset settings for parameters of each effect type are provided as templates) Master EQ (5 bands), 1st part EQ (3 bands), 2nd part EQ (2 bands) Other Controllers Master Volume, AD Input Gain knob, Pitch Bend wheel, Modulation wheel, Ribbon Controller, Control Sliders x 8, Knobs x 8, Super Knob, Data dial Display 7″ TFT Color Wide VGA LCD touch screen Connectors [USB TO DEVICE], [USB TO HOST], MIDI [IN]/[OUT]/[THRU], FOOT CONTROLLER [1]/[2], FOOT SWITCH [ASSIGNABLE]/[SUSTAIN], OUTPUT (BALANCED) [L/MONO]/[R] (6.3 mm, Balanced TRS jacks), ASSIGNABLE OUTPUT (BALANCED) [L]/[R] (6.3 mm, Balanced TRS jacks), [PHONES] (6.3 mm, standard stereo phone jack), A/D INPUT [L/MONO]/[R] (6.3 mm, standard phone jacks) Power Consumption 27 W Accessories AC Power cord, Owner’s Manual, Cubase AI Download Information Live Sets Preset: 128 and more, User: 2,048 Performance Recorder Tracks 16 Sequence tracks, Tempo track, Scene track Recording type Real time replace, Real time overdub, Real time punch in/out Note Capacity 1 Song/Pattern: Approx. 130,000 notes, Store area: Approx. 520,000 notes (Pattern); approx. 520,000 notes (Song) Note Resolution 480 ppq (parts per quarter note) Tempo (BPM) 5 – 300 Arpeggio Parts: 8 Parts simultaneous (max.), Preset: 10,239 types User: 256 types Sequence formats MONTAGE original format, SMF formats 0, 1 Sequencer Patterns 128 patterns Pattern tracks 16 Sequence tracks Pattern Recording type Real time replace, Real time overdub Songs 128 songs Song tracks 16 Sequence tracks, Tempo track, Scene track Song recording type Real time replace, Real time overdub, Real time punch in/out Functions USB audio interface [Sampling Frequency = 44.1kHz] Input: 6 channels (3 stereo channels),Output: 32 channels (16 stereo channels) [Sampling Frequency = 44.1kHz – 192kHz] Input: 6 channels (3 stereo channels),Output: 8 channels (4 stereo channels)
Reviews
There are no reviews yet.