Product Showcase
RODE smartLav+ Lavalier Microphone for Smartphones
Original price was: ₹7,850.00.₹6,400.00Current price is: ₹6,400.00.
|
Specification |
Details |
|---|---|
|
Acoustic Principle |
Permanently Polarised Condenser |
|
Active Electronics |
JFET |
|
Polar Pattern |
Omni-directional |
|
Frequency Range |
20Hz – 20kHz |
|
Output Impedance |
3kΩ Typical |
|
Signal-to-Noise Ratio |
67 dB |
|
Equivalent Noise |
27 dB Typical |
|
Maximum SPL |
110 dB |
|
Sensitivity |
-35 dB (17.8 mV @ 94 dB SPL) |
|
Dynamic Range |
83 dB Typical |
|
Power Requirements |
Powered from iPhone TRRS socket (2.7V) |
|
Output Connection |
TRRS |
The smartLav+ is a broadcast-grade lavalier microphone with a TRRS connector for plugging directly into smartphones. Featuring a high-quality omnidirectional condenser capsule that is very forgiving when placing on talent, it delivers crisp, clear audio for a wide range of recording scenarios. It comes with a pop filter for minimising plosives and its 1.2m (4′) Kevlar-reinforced shielded cable is extremely durable, ready to take on the rigours of any shoot. The smartLav+ is compatible with any audio app and has been designed to pair perfectly with the RØDE Reporter app.
- Broadcast-grade lavalier microphone
- TRRS connector for plugging into smartphones
- Omnidirectional polar pattern
- 1.2m (4′) Kevlar-reinforced shielded cable
- Includes pop filter
You must be logged in to post a review.
Related products
-
Sontronics ARIA
Original price was: ₹152,985.00.₹148,000.00Current price is: ₹148,000.00.Add to cart- Frequency response: 20Hz – 20kHz
- Sensitivity: 18mV/Pa -33dB ±1.5dB
- (0dB = 1V/Pa @ 1,000Hz)
- Polar pattern: Cardioid
- Pad: 0, -10dB
- Filter: Linear, 75Hz
- Impedance: ≤200 Ohms
- Equivalent noise level: 18dB
- (A-weighted)
- Max SPL (for 0.5% THD @ 1kHz): 125dB
- Power supply: SPS-2 115/230V
- *Phantom power NOT required*
- Connector: 8-pin connector (mic),
- 3-pin XLR-M (power supply)
- Dimensions: 230 x 55 x 55mm (mic)
- Weight: 744g (mic), 1155g (mic with shockmount), 1880g (power supply)
- Comes with: wooden box (for Aria mic), shockmount, cables, SPS-2 power supply, aluminium flightcase
-
Sontronics APOLLO 2
Original price was: ₹275,470.00.₹268,000.00Current price is: ₹268,000.00.Add to cart- Frequency response: 20Hz – 18kHz
- Sensitivity: 18mV/Pa -33dB ±1dB (0dB = 1V/Pa @ 1,000Hz)
- Polar pattern: Figure-of-eight (x2)
- Impedance: ≤150 Ohms
- Equivalent noise level: 10dB (A-weighted)
- Max SPL (for 0.5% THD @ 1kHz): 125dB
- Power: Phantom power 48V required
- Connector: 8-pin connector to two 3-pin XLR Neutrik connectors (cable supplied)
- Dimensions: 260 x 65 x 65mm
- Weight: 744g (1247g with shockmount)
- Comes with: stereo to two XLR connector cable, shockmount, aluminium flightcase
-
Sontronics Drum Pack
Original price was: ₹85,615.00.₹83,000.00Current price is: ₹83,000.00.Add to cart-
Polar pattern (all mics): Cardioid
-
Pad: 0/-15dB (DM-1B), 0/-10dB (DM-1S, DM-1T & STC-10)
-
Filter (STC-10 only): Linear/75Hz
-
Freq. response: 20Hz – 20kHz (DM-1B), 30Hz – 20kHz (DM-1S & 1T, STC-10)
-
Sensitivity: 6mV/Pa -45dB ±2dB (DM-1B),
-
8mV/Pa -42dB ±2dB (DM-1S & 1T),
-
11mV/Pa -39dB ±2dB (STC-10)
-
Impedance (all mics): ≤200 Ohms
-
Equivalent noise level (A-weighted): 14dB (DM-1B, 1S & 1T), 18dB (STC-10)
-
Max. SPL*: 155dB (DM-1B), 135dB (DM-1S & 1T), 130dB (STC-10)
-
Power sources (all mics): 48V ±4V phantom power required
-
Connector (all mics): 3-pin XLR
-
Dimensions: 144 x 72 x 72mm (DM-1B),
-
91 x 22 x 22mm (DM-1S & 1T),
-
150 x 21 x 21mm (STC-10)
-
Weight: 829g (DM-1B), 86g (DM-1S & 1T), 125g (STC-10)
-
-
Sontronics MERCURY
Original price was: ₹220,355.00.₹215,000.00Current price is: ₹215,000.00.Add to cart- Polar pattern: Sweepable from omni to figure-of-eight & everything in between
- Frequency response: 20Hz – 20kHz
- Pad: 0, -10dB
- Filter: Linear, 75Hz
- Sensitivity: 18mV/Pa -33dB ±1.5dB (0dB = 1V/Pa @ 1,000Hz)
- Impedance: ≤200 Ohms
- Equivalent noise level: <12dB (A-weighted)
- Max SPL (for 0.5% THD @ 1kHz): 125dB
- Power: 115/230V *phantom power NOT required*
- Connector: 8-pin connector (mic),
- 3-pin XLR-M (power supply)
- Dimensions: 250 x 90 x 80mm
- Weight: 2317g (mic only)
- Comes with: wooden box (for Mercury mic), shockmount, cables, power supply, aluminium flightcase
Reviews
There are no reviews yet.