Product Showcase
RODE NTG3 Broadcast Shotgun Microphone
₹80,350.00
|
Specification |
Details |
|---|---|
|
Acoustic Principle |
Line Gradient |
|
Active Electronics |
RF Bias |
|
Capsule Size |
0.50” (½ inch) |
|
Polar Pattern |
Supercardioid |
|
Address Type |
End |
|
Frequency Range |
40Hz – 20kHz |
|
Output Impedance |
25Ω |
|
Maximum SPL |
130dB SPL |
|
Maximum Output Level |
8.2mV (@ 1kHz, 1% THD into 1KΩ load) |
|
Sensitivity |
-30.0dB re 1V/Pa (31.60mV @ 94 dB SPL) ±2 dB @ 1kHz |
|
Equivalent Noise Level (A-Weighted) |
13dBA |
|
Power Requirements |
P48 (48V Phantom Power) |
The NTG3 is a broadcast-grade shotgun microphone designed for the most demanding shoots that require high-resolution broadcast audio. It features RF-bias technology that yields superior resistance to moisture and condensation, making it suitable for outdoor shoots in adverse conditions. The NTG3 has a rich, warm sound and a tightly controlled polar pattern with exceptional off-axis performance with no coloration. It is also highly regarded for voice-over work, where its natural tone and punch deliver exceptional performance for a wide range of voice types.
- Broadcast-grade RF-bias shotgun microphone
- Highly resistant to moisture and condensation
- Tightly controlled directional pick-up without off-axis coloration
- Available in satin-nickel or matte black finish
You must be logged in to post a review.
Related products
-
Akg C414 XLS
Original price was: ₹105,752.00.₹73,000.00Current price is: ₹73,000.00.Add to cartA LEGEND SINCE 1971
The C414 XLS multipattern condenser microphone offers a choice of nine polar patterns for the perfect sonic capture for every application. A peak hold LED displays even the shortest overload peaks. For live sound applications and permanent installations, all controls can easily be disabled for trouble-free use. -
Sontronics Voicecasting Pack Red
Original price was: ₹30,480.00.₹28,500.00Current price is: ₹28,500.00.Add to cartThe new SONTRONICS Voicecasting Pack features our multi-award-winning Podcast Pro microphone, packed together with our best-selling Elevate stand and cables. Together they make an amazing-value package that will have you recording, broadcasting or streaming in seconds. Hand-built in the UK, Podcast Pro has become a must-have for podcasters, radio presenters, voiceover artists, gamers and musicians …
-
Audio-Technica Microphone AT4040
Original price was: ₹94,400.00.₹55,000.00Current price is: ₹55,000.00.Add to cart- Transparent uppers/mids balanced by rich low-end qualities combine with advanced acoustic engineering for extensive performance capabilities and highest quality
- Dual-diaphragm capsule design maintains precise polar pattern definition across the full frequency range of the microphone
- The 2-micron-thick, vapor-deposited gold diaphragms undergo a five-step aging process so that the optimum characteristics achieved remain constant over years of use
- Three switchable polar patterns: omni, cardioid, figure-of-eight
- Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
- State-of-the-art surface-mount electronics ensure compliance with A-T’s stringent consistency and reliability standards
- Switchable 80 Hz hi-pass filter and 10 dB pad
- Custom shock mount provides superior isolation
-
Sontronics Drum Pack Plus
Original price was: ₹116,240.00.₹113,000.00Current price is: ₹113,000.00.Add to cart-
Polar pattern (all mics): Cardioid
-
Pad: 0/-15dB (DM-1B), 0/-10dB (DM-1S, DM-1T & STC-10)
-
Filter (STC-10 only): Linear/75Hz
-
Freq. response: 20Hz – 20kHz (DM-1B), 30Hz – 20kHz (DM-1S & 1T, STC-10)
-
Sensitivity: 6mV/Pa -45dB ±2dB (DM-1B),
-
8mV/Pa -42dB ±2dB (DM-1S & 1T),
-
11mV/Pa -39dB ±2dB (STC-10)
-
Impedance (all mics): ≤200 Ohms
-
Equivalent noise level (A-weighted): 14dB (DM-1B, 1S & 1T), 18dB (STC-10)
-
Max. SPL*: 155dB (DM-1B), 135dB (DM-1S & 1T), 130dB (STC-10)
-
Power sources (all mics): 48V ±4V phantom power required
-
Connector (all mics): 3-pin XLR
-
Dimensions: 144 x 72 x 72mm (DM-1B),
-
91 x 22 x 22mm (DM-1S & 1T),
-
150 x 21 x 21mm (STC-10)
-
Weight: 829g (DM-1B), 86g (DM-1S & 1T), 125g (STC-10)
-
Reviews
There are no reviews yet.