Category
- ACCESSORIES
- AUDIO INTERFACES
- BOSS
- brass and wood winds
- DJ CONTROLLERS
- DRUMS & PERCUSSION
- EFFECTS PROCESSOR
- GUITAR
- KEYBOARDS
- OTHER
- PIANO
- SPEAKER
- STOCK CLEARANCE SALE
- STUDIO/ RECORDING
- VIOLINS

RODE NT55 Small-diaphragm Condenser Microphone
₹39,100.00 Original price was: ₹39,100.00.₹37,000.00Current price is: ₹37,000.00.
|
Feature |
Specification |
|---|---|
|
Active Electronics |
JFET impedance converter with bipolar output buffer |
|
Capsule Size |
0.50” |
|
Polar Pattern |
Cardioid, Omnidirectional |
|
Address Type |
End |
|
Frequency Range |
20Hz – 20kHz |
|
Output Impedance |
100Ω |
|
Maximum SPL |
136 dB SPL |
|
Maximum Output Level |
8.0 mV (@ 1kHz, 1% THD into 1KΩ load) |
|
Sensitivity |
-38.0 dB re 1V/Pa (12.60 mV @ 94 dB SPL) ±2 dB @ 1kHz |
|
Equivalent Noise Level (A-Weighted) |
15 dBA |
|
Power Requirements |
P48 phantom power |
|
Output Connection |
XLR |
The NT55 is a versatile small-diaphragm condenser microphone designed for critical recording applications. Featuring a 1/2-inch gold-sputtered cardioid condenser capsule, it delivers a smooth, balanced sound with very low self-noise. For added flexibility, it features a three-position pad (0, -10dB, -20dB) and three-stage high-pass filter (flat, 75Hz, 150Hz) and comes with the NT45-O interchangeable omnidirectional capsule.
Its exceptionally accurate cardioid polar pattern and wide frequency response make the NT55 ideal for recording everything from acoustic instruments to drum overheads and cymbals to live performances and dialogue on-location.
Also available as a certified match pair for stereo recording.
- 1/2-inch gold-sputtered cardioid condenser capsule
- Three-position pad and three-stage high-pass filter
- Supplied with the NT45-O interchangeable omnidirectional capsule
- Available as a certified match pair for stereo recording
- 10-year warranty
You must be logged in to post a review.
Related products
-
Sontronics APOLLO 2
₹275,470.00Original price was: ₹275,470.00.₹268,000.00Current price is: ₹268,000.00.Add to cart- Frequency response: 20Hz – 18kHz
- Sensitivity: 18mV/Pa -33dB ±1dB (0dB = 1V/Pa @ 1,000Hz)
- Polar pattern: Figure-of-eight (x2)
- Impedance: ≤150 Ohms
- Equivalent noise level: 10dB (A-weighted)
- Max SPL (for 0.5% THD @ 1kHz): 125dB
- Power: Phantom power 48V required
- Connector: 8-pin connector to two 3-pin XLR Neutrik connectors (cable supplied)
- Dimensions: 260 x 65 x 65mm
- Weight: 744g (1247g with shockmount)
- Comes with: stereo to two XLR connector cable, shockmount, aluminium flightcase
-
Sontronics CORONA
₹36,050.00Original price was: ₹36,050.00.₹34,000.00Current price is: ₹34,000.00.Add to cart- Polar pattern: Supercardioid
- Frequency response: 50Hz – 15kHz
- Sensitivity: -50dB ±2dB
- Impedance: ≤600 Ohms
- Connector: Three-pin XLR
- Power: Phantom power NOT required
- Dimensions: 160 x 120 x 60mm
- Weight: 369g
- Comes with: hard-shell flightcase
-
Lauten Audio LS-308 V2
₹70,495.00Original price was: ₹70,495.00.₹66,000.00Current price is: ₹66,000.00.Add to cartThe Large-diaphragm Condenser for Challenging Environments The Lauten Audio LS-308 is a noise-rejecting, high-dynamic-range, large-diaphragm condenser microphone that’s a real problem-solver in challenging scenarios where isolation is desired but difficult to achieve. Featuring a second-order cardioid polar pattern with 270 degrees of off-axis frequency rejection and ultra-high dynamic range, the LS-308 is designed for use …
-
Sontronics Drum Pack Plus
₹116,240.00Original price was: ₹116,240.00.₹113,000.00Current price is: ₹113,000.00.Add to cart-
Polar pattern (all mics): Cardioid
-
Pad: 0/-15dB (DM-1B), 0/-10dB (DM-1S, DM-1T & STC-10)
-
Filter (STC-10 only): Linear/75Hz
-
Freq. response: 20Hz – 20kHz (DM-1B), 30Hz – 20kHz (DM-1S & 1T, STC-10)
-
Sensitivity: 6mV/Pa -45dB ±2dB (DM-1B),
-
8mV/Pa -42dB ±2dB (DM-1S & 1T),
-
11mV/Pa -39dB ±2dB (STC-10)
-
Impedance (all mics): ≤200 Ohms
-
Equivalent noise level (A-weighted): 14dB (DM-1B, 1S & 1T), 18dB (STC-10)
-
Max. SPL*: 155dB (DM-1B), 135dB (DM-1S & 1T), 130dB (STC-10)
-
Power sources (all mics): 48V ±4V phantom power required
-
Connector (all mics): 3-pin XLR
-
Dimensions: 144 x 72 x 72mm (DM-1B),
-
91 x 22 x 22mm (DM-1S & 1T),
-
150 x 21 x 21mm (STC-10)
-
Weight: 829g (DM-1B), 86g (DM-1S & 1T), 125g (STC-10)
-















Reviews
There are no reviews yet.