Proel LT10A – Active 2-way loudspeaker systems
Original price was: ₹78,570.00.₹74,641.00Current price is: ₹74,641.00.
System type: 2-way vented enclosure
High Frequency Device: 1” compression driver with 1″ VC
Low Frequency Device: 10” woofer with 2” voice coil
Angular Coverage: 90° H x 60° V
Total peak power: 600 W
HF Amplifier Continuous Power: 50 W Class AB
LF Amplifier Continuous Power: 250 W Class D
Power Supply: SMPS
Processing: Analog
Frequency Response: 60 Hz – 20 kHz
Max SPL: 123
Connectors: IN: COMBO, LINK: XLR M
Controls: LEVEL, LINE/MIC selector, LOW EQ, HIGH EQ, GND LIFT, FRONT LED selector
Flying System: 4 x M10 top/bottom
Construction: Plywood
Cabinet Colour: Black
Handles: 1 x rear
Mounting Pole: 1 x bottom, dual angle
Power Supply: 230 or 120 VAC 50/60 Hz with LINE VOLTAGE selector
Dimensions (W x H x D): 340 x 515 x 310 mm
Weight: 12.5 kg / 27.6 lbs.
The LITE Series by PROEL is an extended range of active and passive speaker systems with plywood cabinet offering the renowned PROEL sound and a high-level performance in a reliable and affordable package.
For the construction of the cabinets we have used plywood, a very lightweight and durable material that makes moving and installing these speakers very quick and easy. Strong, anti-scratch paint and steel grilles with an internal foam layer provide proper protection for years of service. The dual-angle pole holder featured in 8”, 10”, 12” and 15” models offers the possibility to obtain a more uniform coverage of the audience.
For the high frequency reproduction of LITE Series we have designed wide-dispersion horns, able to provide constant coverage for large audiences and detailed response with low distortion. The high-excursion woofers, together with carefully tuned vented cabinets, offers an extended response with deep and tight basses.
The LITE Series includes 6 active models ranging from 6.5” to dual 15” woofers, plus 1 satellites + subwoofer system. The extremely lightweight power modules used in the active models feature the latest technologies for amplifi cation, such as Switch Mode Power Supply and CLASS D output stages, which provides a massive amount of power with a reduced weight. The power modules are hosted in fully-sealed die-cast aluminum boxes that provides protection, perfect insulation of the cabinet from the outside and extremely efficient cooling. Each module includes a sophisticated pre-amp section with up to 24 dB/ oct. phase aligned crossover fi lters and active EQ fi lters for the system’s fi ne tuning. The DUAL LIMITER circuit ensures an undistorted sound even at the loudest level and a total loudspeaker protection.
The LT loudspeaker systems can be combined with the SW subwoofers, available in 5 models and capable of providing the perfect low frequency extension for each model of the series.
1” compression driver with 1” VC on a constant coverage 90° x 60° horn
10” woofer with 2” VC
600 W peak power
50 W continuous class AB amplifier for the high frequencies
250 W continuous class D amplifier for the low frequencies
Switch Mode Power Supply (SMPS)
LINE/MIC input
SPL MAX 123 dB
Frequency response 60 Hz – 20 kHz
Lightweight plywood cabinet
1 rear handle
4 x M10 flying points
Related products
-
Dynaudio 9S
Original price was: ₹125,990.00.₹113,590.00Current price is: ₹113,590.00.Add to cart- 300W Powered Subwoofer
- Onboard 300-watt Class D amplifier module
- 9.5″ MSP long-throw woofer for accurate low-frequency reproduction
- Double front baffle maximizes rigidity for higher-volume listening sessions
- Frequency response: 22Hz–175Hz ±3dB
- Master/Slave feature for daisy-chaining multiple subwoofers
- Sealed-cabinet design
-
PreSonus Eris Sub8
Original price was: ₹27,600.00.₹24,990.00Current price is: ₹24,990.00.Add to cartFeatures:
● 8-inch, front-firing, paper-composite low-frequency transducer with high-elastisity rubber surround
● Class AB amplifier: 100W peak (50W RMS) power
● Input gain control (-30 dB to +6 dB, continuously variable)
● Continuously variable lowpass filter (50 Hz to 130 Hz)
● Defeatable highpass filter removes frequency content below 80 Hz from the full-range signal sent from the Eris Sub8 outputs to the main speakers
● Left and right, balanced ¼-inch TRS and unbalanced RCA main inputs
● Left and right balanced ¼-inch TRS and unbalanced RCA pass-through outputs for connecting satellite speakers
● Polarity invert switch
● Protection: RF interference, Output-current limiting, Over-temperature, Turn-on/off transient, Subsonic filter, External mains fuse -
PROEL SESSION1
Original price was: ₹44,630.00.₹42,399.00Current price is: ₹42,399.00.Add to cartMIXER Section MONO inputs 2 x MIC/LINE IN (XLR-F + 1.4″ JACK) STEREO input 1 x LINE IN (MINI-JACK) Outputs LINE OUT (XLR-M) Main EQ SUB LEVEL (SPEECH-MUSIC-BOOST) Internal Effect ECHO-DELAY MULTIMEDIA Section Player Type USB / SD / WIRELESS AUDIO player with TWS Compatible File Formats MP3 Control Interface LCD display, CONTROL buttons AMPLIFIER Section Total Peak Power 400 W Continuous Power 200 W Amplifier Type Class D Power Supply SMPS Processing Analog LOUDSPEAKER Section System Type Compact powered column system with subwoofer High Frequency Device 4 x 2.5″ (66mm) drivers Low Frequency Device 8” (200mm) woofer with 1.5” VC Angular Coverage 90° H x 60° V Frequency Response 50Hz – 18kHz Maximum SPL Output 108 dB GENERAL Specifications Construction Polypropylene Cabinet Colour Black Column system 3-pcs with fast-linking system and integral power connections Handles 1 x subwoofer top Accessories Padded bag for 3-pcs column Dimensions (WxHxD) SUB: 318x 400 x484.5 mm
COLUMN (each piece): 520 X 84 X 97.5 mmWeight 14 Kg (complete system) Power Supply 100 V-240 V~ 50/60 Hz Rated Power Consumption 100 W -
Alto Professional TS408
Original price was: ₹69,980.00.₹36,750.00Current price is: ₹36,750.00.Add to cartKey Features:
- 2000 W peak (1300 LF + 700 HF), 1000 W continuous RMS (650 LF + 350 HF)
- FREE Alto App (iOS/Android) for remote configuration and control
- Bluetooth® audio streaming direct from device
- On-board DSP with 4 Speaker Use modes (inc. Custom EQ via App)
- True Wireless Stereo speaker linking via Bluetooth®
- Integrated 3-channel mixer with dual XLR ¼-inch combo inputs, mic/line switches and independent level controls
- XLR Mix output, Speaker Use, and Sub Size Controls
- 8” driver, 2.0” (50 mm) high-temperature voice coil
- 1” exit ceramic driver with 1.4” (35 mm) coil
- Lightweight enclosure for easy transport, set up and installation
- Versatile design – pole-mountable, wedge monitor or flown application with integral M6 suspension points
- Powerful and efficient class D amplifiers with fanless cooling design to run cleaner, quieter and with greater long-term reliability
- Designed and tuned in the USA
Product Showcase
Reviews
There are no reviews yet.