Product Showcase
PreSonus Eris Sub8
Original price was: ₹28,800.00.₹25,990.00Current price is: ₹25,990.00.
Features:
● 8-inch, front-firing, paper-composite low-frequency transducer with high-elastisity rubber surround
● Class AB amplifier: 100W peak (50W RMS) power
● Input gain control (-30 dB to +6 dB, continuously variable)
● Continuously variable lowpass filter (50 Hz to 130 Hz)
● Defeatable highpass filter removes frequency content below 80 Hz from the full-range signal sent from the Eris Sub8 outputs to the main speakers
● Left and right, balanced ¼-inch TRS and unbalanced RCA main inputs
● Left and right balanced ¼-inch TRS and unbalanced RCA pass-through outputs for connecting satellite speakers
● Polarity invert switch
● Protection: RF interference, Output-current limiting, Over-temperature, Turn-on/off transient, Subsonic filter, External mains fuse
Available on backorder
The single best subwoofer you can get to put a little boom in your room, the Eris Sub8 is the first subwoofer to join the lauded and best-selling Eris studio monitor line. We called it Eris because it’s been designed from the ground up to be part of the family; it compliments the voicing and frequency response of the modern Eris classics.. The surprisingly loud 100-Watt Eris Sub8 drops down to a molar-rattling 30Hz, allowing you to both rock harder and produce better mixes, as you’ll be hearing an accurate representation of your work. Thanks to robust configuration and I/O, you’ll be able to tailor your Eris Sub8 configuration exactly to your mixing and listening needs. You can connect your existing monitors via ¼” TRS or RCA, set the input level to your liking, and even invert the polarity. Most importantly, you get a High Pass Filter and a Low Pass Crossover control that ensures your Sub8 starts working at the precise low-frequency point where your main monitors stop working. This makes sure you avoid the flubbery, smudged, low-end mess that one hears in redundant, duplicate, redundant bass reproduction that occurs without a crossover.
You must be logged in to post a review.
Related products
-
Alto Professional TS410
Original price was: ₹73,600.00.₹37,990.00Current price is: ₹37,990.00.Add to cartKey Features
- 2000 W peak (1300 LF + 700 HF), 1000 W continuous RMS (650 LF + 350 HF)
- FREE Alto App (iOS/Android) for remote configuration and control
- Bluetooth® audio streaming direct from device
- On-board DSP with 4 Speaker Use modes (inc. Custom EQ via App)
- True Wireless Stereo speaker linking via Bluetooth®
- Integrated 3-channel mixer with dual XLR ¼-inch combo inputs, mic/line switches and independent level controls
- XLR Mix output, Speaker Use, and Sub Size Controls
- 10” driver, 2.0” (50 mm) high-temperature voice coil
- 1” exit ceramic driver with 1.4” (35 mm) coil
- Lightweight enclosure for easy transport, set up and installation
- Versatile design – pole-mountable, wedge monitor or flown application with integral M10 suspension points
- Powerful and efficient class D amplifiers with fanless cooling design to run cleaner, quieter and with greater long-term reliability
- Designed and tuned in the USA
-
Focal Sub6 (each)
Original price was: ₹175,605.00.₹166,824.00Current price is: ₹166,824.00.Read morePerformance Frequency response 30Hz – 250Hz Maximum SPL 116dB SPL (peak @ 1m) Electronic section Inputs Type / Impedance Connector Sensitivity Right, left, LFE
Electronically balanced / 10 kOhmsXLR 3 points socket Adjustable Outputs (towards satellites) Type/Impedance
ConnectorRight, left
Electronically balanced / 50 Ohms
XLR 3 points plugAmplification 350W rms, BASH ® technology Signal internal treatment and functions Subwoofer section Mono right/left summation
LFE + mono low-pass
24dB / octave
Phase adjustment
Polarity selection switch
Switch high-pass filter, cut-off frequency selectionControl Adjustable subwoofer level
Low-pass cut-off frequency setting
Phase adjustment
Polarity adjustment
Subwoofer switch (mute)
2.1 “Bypass” (external remote control)
High-pass frequency selection
Releasable high-passVisualization (LED) Power On Subwoofer switch(mute) Released high-pass Power supply Local supply Connection 230V (1.6A fuse) or 115V (3.15A fuse) Removable CEI supply wire Transducers Subwoofer 11W7670, 105/8′ (27cm) Focal “W” composite sandwich cone driver Cabinetwork Construction 71/2′ (19mm) MDF panels Finish Dark red natural veneering side panels, black body Dimensions (HxLxD) 1415/16 x 139/16 x 175/16′ (380mm x 344mm x 440mm) Weight 50.7lb (23kg) -
VOX Amplispeaker AC2
₹5,000.00Add to cart- Battery-powered miniature amp with a variety of functions including rhythm patterns and effects.
- 2 watts of output provides plenty of power in spite of the amp’s ultra-small size.
- Choose from three types of sounds: clean, crunch, and lead. (AC2 RhythmVOX)
- A total of 81 rhythm patterns: 9 genres × 9 variations,
- Five types of effects, including chorus, delay, and reverb.
- High-performance dedicated E-string tuner.
- Headphone jack allows you to concentrate on your playing and practice silently
-
Kali Audio WS-12 V2 Subwoofer
Original price was: ₹111,900.00.₹99,900.00Current price is: ₹99,900.00.Add to cartFeatures:
- 1,000W, 12″ powered subwoofer
- 23Hz–160Hz frequency response faithfully reproduces your mix’s low-frequency content
- 123dB max SPL — loud enough for 5.1 arrays and light PA use (5.1 systems require an external processor and crossover)
- Built-in limiter circuit protects against unsafe voltage levels
- Small size fits easily under your desk and in most small passenger cars
- Mega-durable 18mm plywood enclosure and roadworthy side handles
- Low-noise port tube yields clean, punchy bass with zero chuffing
- Selectable crossovers every 20Hz between 40Hz and 140Hz for use in a myriad of applications
- Presets for Kali’s LP-6, LP-8, and IN-8 studio monitors, plus LFE and external crossover settings
- 4 preset gain adjustment settings compensate for the sub’s positioning
- Polarity reverse function resolves a common sonic problem
- RCA inputs accommodate consumer-grade devices
- Power-saving standby mode
- Rear-panel jack enables you to use a 3rd-party footswitch to bypass the subwoofer
Reviews
There are no reviews yet.