PreSonus Eris Sub8
₹27,600.00 Original price was: ₹27,600.00.₹24,990.00Current price is: ₹24,990.00.
Features:
● 8-inch, front-firing, paper-composite low-frequency transducer with high-elastisity rubber surround
● Class AB amplifier: 100W peak (50W RMS) power
● Input gain control (-30 dB to +6 dB, continuously variable)
● Continuously variable lowpass filter (50 Hz to 130 Hz)
● Defeatable highpass filter removes frequency content below 80 Hz from the full-range signal sent from the Eris Sub8 outputs to the main speakers
● Left and right, balanced ¼-inch TRS and unbalanced RCA main inputs
● Left and right balanced ¼-inch TRS and unbalanced RCA pass-through outputs for connecting satellite speakers
● Polarity invert switch
● Protection: RF interference, Output-current limiting, Over-temperature, Turn-on/off transient, Subsonic filter, External mains fuse
The single best subwoofer you can get to put a little boom in your room, the Eris Sub8 is the first subwoofer to join the lauded and best-selling Eris studio monitor line. We called it Eris because it’s been designed from the ground up to be part of the family; it compliments the voicing and frequency response of the modern Eris classics.. The surprisingly loud 100-Watt Eris Sub8 drops down to a molar-rattling 30Hz, allowing you to both rock harder and produce better mixes, as you’ll be hearing an accurate representation of your work. Thanks to robust configuration and I/O, you’ll be able to tailor your Eris Sub8 configuration exactly to your mixing and listening needs. You can connect your existing monitors via ¼” TRS or RCA, set the input level to your liking, and even invert the polarity. Most importantly, you get a High Pass Filter and a Low Pass Crossover control that ensures your Sub8 starts working at the precise low-frequency point where your main monitors stop working. This makes sure you avoid the flubbery, smudged, low-end mess that one hears in redundant, duplicate, redundant bass reproduction that occurs without a crossover.
You must be logged in to post a review.
Related products
-
Dynaudio 9S
₹125,990.00Original price was: ₹125,990.00.₹113,590.00Current price is: ₹113,590.00.Add to cart- 300W Powered Subwoofer
- Onboard 300-watt Class D amplifier module
- 9.5″ MSP long-throw woofer for accurate low-frequency reproduction
- Double front baffle maximizes rigidity for higher-volume listening sessions
- Frequency response: 22Hz–175Hz ±3dB
- Master/Slave feature for daisy-chaining multiple subwoofers
- Sealed-cabinet design
-
Alto Professional TS412
₹89,980.00Original price was: ₹89,980.00.₹47,250.00Current price is: ₹47,250.00.Add to cartKey Features
- 2500 W peak (1600 LF + 900 HF) 1250 W continuous RMS (800 LF + 450 HF)
- FREE Alto App (iOS/Android) for remote configuration and control
- Bluetooth® audio streaming direct from device
- On-board DSP with 4 Speaker Use modes (inc. Custom EQ via App)
- True Wireless Stereo speaker linking via Bluetooth®
- Integrated 3-channel mixer with dual XLR ¼-inch combo inputs, mic/line switches and independent level controls
- XLR Mix output, Speaker Use, and Sub Size Controls
- 12” driver, 2.5” (63 mm) high-temperature voice coil
- 1” exit ceramic driver with 1.4” (35 mm) coil
- Lightweight enclosure for easy transport, set up and installation
- Versatile design – pole-mountable, wedge monitor or flown application with integral M10 suspension points
- Powerful and efficient class D amplifiers with fanless cooling design to run cleaner, quieter and with greater long-term reliability
- Designed and tuned in the USA
-
PROEL SESSION4
₹207,380.00Original price was: ₹207,380.00.₹197,000.00Current price is: ₹197,000.00.Add to cartSystem System Type Portable Powered 2.1 System with Two Line Array Tops and One Subwoofer Maximum SPL Output 122 dB peak system output (pink noise) Frequency Response (-10dB) 45Hz – 18kHz Speakers LF Driver 2 x 6.5″ (165mm) woofer in BANDPASS configuration HF Driver 8 x 2.75″ (70mm) neodymium drivers (4 for each TOP) Coverage Pattern 100° x 50° Amplifier Type Class D with SMPS System Power Rating 300 Watts LF, 2×150 Watts HF Continuous, 1200W Peak Channels 2 MIC/LINE selectable inputs Connectors 2 x COMBO (INPUTS), 2 x XLR-M (LINK), 2 x SPEAKON (POWER OUTPUTS) Controls 1 x LCD with Data Encoder Processing 24bit / 48KHz CORE DSP, 2-band EQ Selectable CONFIGURATION and EQ PRESETS, Digital Limiting Wireless Audio Bluetooth built-in receiver General Specifications Cabinet Material Plywood Finishing High-strenght polyurethane black paint Grille Powder coated perforated steel Handles 2 x sides (SUB) Pole Socket 1 x top M20 (SUB), 1 x bottom 35mm (TOP) Included Accessories M20 / 35mm telescopic pole, 4-wire SPEAKON/SPEAKON cable, 2 x SAT cover AC input 230 VAC or 120 VAC 50/60 Hz with LINE VOLTAGE selector Dimensions (W x H x D) TOP: 100x358x100 mm, SUB: 420x480x460 mm Weight TOP: 1.5 kg (3.3 lbs), SUB: 22 kg (48.5 lbs), SYSTEM: 25 kg (55.1 lbs) -
Dynaudio 18S
₹233,600.00Original price was: ₹233,600.00.₹209,990.00Current price is: ₹209,990.00.Add to cart- 500W Powered Subwoofer
- Two 9.5″ MSP+ Hybrid Drive long-throw woofers for accurate low-frequency reproduction
- Advanced DSP with updatable presets for a range of Dynaudio pro studio monitors
- Built-in 3-band parametric EQ
- Master/Slave feature for daisy-chaining multiple subs
- Dual-opposing driver design principle
- Frequency response: 16Hz—230Hz ±3dB
Reviews
There are no reviews yet.