Product Showcase
NUX B-6 PRO Wireless System for Wind Instruments
Original price was: ₹31,789.00.₹28,000.00Current price is: ₹28,000.00.
Microphone
– Microphone Type: Condenser
– Polar Patterns: Cardioid
– Microphone Sensitivity: -51dB
TX (Transmitter) / RX (Receiver)
– Operating Frequency Band: 2400-2483.5MHz
– RF Output Power: Maximum 10mW E.I.R.P
– Transmission Distance: Up to 165 feet line-of-sight
– Latency: 3.6ms (Low Latency), 6.1ms (Default), 9.9ms (Stable)
– Sampling Depth / Sampling Rate: 24bit/48kHz
– Frequency Response Range: 20Hz-20kHz
– Maximum Audio Signal Output: 6.4dBV (SEND/OUTPUT)
– THD+N: <0.01% (Typical)
– Dynamic Range: 112dBA (SEND/OUTPUT)
– Battery Capacity: TX (transmitter) 3.7V/500mAh, RX (receiver) 3.7V/3000mAh
– Battery Life: TX (transmitter) up to 7 hours, RX (receiver) up to 11 hours
– Power: DC9V, 1A (minimum), negative tip power supplies (Receiver)
– Auto Power Off: Automatic power off after 10 minutes of no wireless connection
– TX (Transmitter) Dimensions (excluding microphone): 61(L)x60(W)x30(H)mm
– TX (Transmitter) Weight (excluding microphone): Approximately 60g
– RX (Receiver) Dimension: 93(L)x120(W)x60(H)mm
– RX (Receiver) Weight: 420g
Customize Your Own Boot-Up Picture
B-6 PRO allows you to customize GIF boot-up animations! Follow these steps to set it up:
1. Download the “NUX B-6 PRO GIF Customizer” software from the Support section below and install it.
2. Use the included USB cable to connect the B-6 PRO RX (Receiver) to your computer. Launch the GIF Customizer software and follow the prompts to upload and save your GIF to the device.
3. Disconnect the USB cable and restart the RX. Navigate to Menu > Display Settings > Boot-up Animation and select “User Image”.Now your B-6 PRO will greet you with your favorite animation every time you turn it on!
USB Audio
You can connect the B-6 PRO to a mobile phone via the USB-C port for digital audio recording.
Built-In Multiple Functions
The NUX B-6 PRO has a digital tuner designed for wind instruments, a booster effect, and send/return functionality, all of which can be individually controlled through the footswitch setting.
Professional EQ Presets For Every Wind Instrument
This system features a range of professionally tuned EQ presets, each optimized for different wind instruments. Whether you’re playing saxophone, trumpet, or any brass/woodwind, simply select a preset with one click to achieve perfectly balanced, clear tone—without the need for external tweaking.
Long Battery Life With Convenient Magnetic Charging
The NUX B-6 PRO is built for long sessions with high-capacity lithium batteries in both the transmitter and receiver. Enjoy up to 7 hours of continuous playtime on a full charge—ideal for rehearsals, gigs, or studio tracking. When it’s time to recharge, simply place the transmitter on top of the receiver for effortless magnetic charging. No cables, no hassle—just smart, reliable power that keeps up with your performance.
You must be logged in to post a review.
Related products
-
Telefunken DC6 Drum Pack
₹251,370.00Add to cartDC6 Drum Microphone Set includes:
-
1x M82 with M782 mount
-
1x M80-SHB with M784 (metal) and M785 (plastic) mount
-
2x M81-SH with M784 (metal) and M785 (plastic) mount
-
2x M60 FET with M761 elastic mount
-
6x SGMC-5R five-meter XLR with right angle female connector
-
1x HC87 Hard Shell Flight Case
-
-
Sontronics Drum Pack
Original price was: ₹85,615.00.₹83,000.00Current price is: ₹83,000.00.Add to cart-
Polar pattern (all mics): Cardioid
-
Pad: 0/-15dB (DM-1B), 0/-10dB (DM-1S, DM-1T & STC-10)
-
Filter (STC-10 only): Linear/75Hz
-
Freq. response: 20Hz – 20kHz (DM-1B), 30Hz – 20kHz (DM-1S & 1T, STC-10)
-
Sensitivity: 6mV/Pa -45dB ±2dB (DM-1B),
-
8mV/Pa -42dB ±2dB (DM-1S & 1T),
-
11mV/Pa -39dB ±2dB (STC-10)
-
Impedance (all mics): ≤200 Ohms
-
Equivalent noise level (A-weighted): 14dB (DM-1B, 1S & 1T), 18dB (STC-10)
-
Max. SPL*: 155dB (DM-1B), 135dB (DM-1S & 1T), 130dB (STC-10)
-
Power sources (all mics): 48V ±4V phantom power required
-
Connector (all mics): 3-pin XLR
-
Dimensions: 144 x 72 x 72mm (DM-1B),
-
91 x 22 x 22mm (DM-1S & 1T),
-
150 x 21 x 21mm (STC-10)
-
Weight: 829g (DM-1B), 86g (DM-1S & 1T), 125g (STC-10)
-
-
Ultimate Support PRO-R-T-F
Original price was: ₹8,000.00.₹7,200.00Current price is: ₹7,200.00.Add to cartSpecs:
- Part Name: Pro-R-T-F
- Part Number: 17956
- Tube Material: Steel
- Tube Finish: Powder Coated
- Tube Diameter: .87″ (22 mm)
- Base Type: Tripod
- Base Diameter: 26″ (660 mm)
- Height Type: Standard
- Shaft Height: 37.5″ – 65″ (953 mm x 1651 mm)
- Weight: 7.55 lbs (3.4 kg)
- Boom Type: Fixed
- Boom Length: 31.75″ (806 mm)
-
Stay Torre Stand 1300/02 – Blue
Original price was: ₹22,346.00.₹21,229.00Current price is: ₹21,229.00.Add to cart-
Application:Support for Keyboards / Peripherals
-
Comes with:01 base 10º (with flap for flexible) + 01 pair of arms / stringer 380mm (with adjustable rubber + rubber stop)01 Straight Base + 01 pair of arms / Strut 450mm (with adjustable rubber)01 complete kit passes tower cables + Transport Bag Note (+ 1 pair of arm support rubber that can be used if Stop Rubber is removed)
-
Maximum height:1200mm
-
Capacity:Supports keyboards with up to 76 keys
-
Maximum Weight Capacity:120kg (Do not exceed 40.0kg per pair of spars)
-
Material:Aluminum
-
Finishing:Special painting
-
Colors:Black, Silver, Red, Blue and White
-
Weight:5.8Kg
-
Reviews
There are no reviews yet.