Mackie Thump215
Original price was: ₹66,000.00.₹41,500.00Current price is: ₹41,500.00.
Tech Specs
- Powered:Yes
- Channels:2-channel mixer
- LF Driver Size:15″ high-performance woofer
- HF Driver Size:1″ compression driver
- Total Power:1400W
- Inputs:2 x XLR-1/4″ combo, 1 x 1/8″ TRS
- Outputs:1 x XLR
- Frequency Response:40Hz-20kHz
- Maximum Peak SPL:129dB SPL
- Mounting Options:Standard pole mount, Floor Wedge
- Power Source:Standard IEC AC cable
- Height:22″
- Width:17.4″
- Depth:14″
- Weight:34.8 lbs.
A New Spin on the Classic Thump Formula
Mackie’s next generation of Thump loudspeakers is redesigned from the ground up to provide you with enhanced power and utility, all at a wallet-friendly price! The Thump215 loudspeaker’s ultra-efficient 1,400-watt class-D amplifier pushes plenty of air through the high-performance 15-inch woofer — a design that live sound pros find is more than capable of handling most small- to medium-sized venues. Next, the 1-inch compression driver ensures that your sound is evenly dispersed, allowing the entire crowd to hear your music with crystal-clear quality. There’s even a built-in feedback eliminator to keep everything noise- and rumble-free! Plus, the Thump215 is loaded with flexible I/O power, boasting a versatile 2-channel design that can be set up for music ducking, allowing this loudspeaker to extend its utility outside of standard musical applications into the world of public address and education. Finally, like all Mackie products, the Thump215 is built tough to withstand the rigors of the road, and the unloading crew is sure to appreciate the lightweight 34-pound form factor.
Ultra-efficient class-D power
The Mackie Thump215’s ultra-efficient class-D amplification kicks out a powerful sound that defies this loudspeaker’s modest size! A 15-inch woofer dishes out plenty of low-end punch, and the 1-inch compression driver ensures that your sound is evenly dispersed across the entire venue. Lastly, Mackie’s built-in feedback eliminator all but eradicates unwanted speaker screech and rumble, maximizing your sonic potential and ensuring that your show runs smooth from start to finish.
Portable design for easy setup and transport
Weighing in at less than 35 pounds, the Thump215 is compact and lightweight, making it easy to transport. The Thump215’s small and portable size will ensure that you won’t need a road crew to mount it on a pole or pack it into your car. What’s more, the Thump215 is housed in a super-tough road-ready enclosure, so don’t think that its light weight makes it fragile!
Mackie Thump215 1,400-watt Powered Loudspeaker Features:
- 1,400W of class-D amplification is more than loud enough for most small- to medium-sized venues
- 15-inch woofer and 1-inch compression driver deliver a full-range sound with plenty of low end
- Flexible I/O, versatile 2-channel design, and a through output for a wide range of configurations
- Music ducking mode is ideal for public address and education settings
- Angled design is perfect for floor monitoring, but can also be mounted on a standard pole setup
- Lightweight 34-pound design offers effortless portability
- Signature Mackie durability to withstand the rigors of the road
- Built-in feedback eliminator reduces unwanted screech and rumble
Related products
-
Alto Professional TX308
Original price was: ₹34,980.00.₹18,350.00Current price is: ₹18,350.00.Add to cartKey features
- 350 Watts peak, (175 Watts continuous Class D power)
- The 90 H x 60 V horn delivers greater coverage
- The full grille delivers style and provides protection for your investment.
- 8-inch (203 mm) LF driver, 1.4-inch (35.5 mm) voice coil
- 1-inch (25.4 mm) titanium diaphragm HF compression driver
- Lightweight, portable design for main or wedge monitor operation
- Standard speaker pole socket
- Bi-amplified design with precision active crossover and EQ
- Balanced XLR Mic/Line input, Link Output and Volume control
- Integrated analog limiter and overload protection circuitry
- Designed and tuned in the USA
-
Yamaha DBR15 Powered Loudspeaker
Original price was: ₹76,700.00.₹55,000.00Current price is: ₹55,000.00.Add to cartDBR15
Speaker type 2-way, Bi-amp powered speaker, Bass-reflex type Frequency range (-10dB) 50Hz – 20kHz Nominal coverage H 90° V 60° Components LF Diameter:15″ cone, Voice Coil:2.5″, Magnet:Ferrite HF Diaphragm:1.4″, Type: 1″ throat compression driver, Magnet:Ferrite Crossover 2.1kHz: FIR-X tuning™ (linear phase FIR filter) Output power Dynamic:1000 W (LF: 800 W, HF: 200 W) / Continuous: 465 W (LF: 400 W, HF: 65 W) Maximum output level (1m; on axis) 132dB SPL I/O connectors INPUT1: Combo x1, INPUT2: Combo x 1 + RCA pin x 2 (Unbalanced), OUTPUT: XLR3-32 x 1 (CH1 Parallel Through or CH1+CH2 Mix) Processors D-CONTOUR: FOH/MAIN, MONITOR, OFF Heat dissipation Fan cooling, 4 speeds Power requirements 100 V, 100-120V, 220-240 V, 110/127/220V (Brazil), 50/60Hz Power consumption 74W(1/8 Power Consumption), 18W(Idle) Cabinet material Plastic Finish Black Handle Side x 2 Flying and mounting hardware Bottom x 2, Rear x 1 (Fit for M8 x 15 mm eyebolts) Pole socket 35mm (Bottom x 1) Dimensions W 455mm (17.9″) H 700mm (27.6″) D 378mm (14.9″) Net weight 19.3 kg (42.6 lbs) Accessories BBS251, BCS251, BWS251-300, BWS251-400 (Optional Speaker bracket) -
Yamaha STAGEPAS 1K MKII Portable Bluetooth Speaker
Original price was: ₹132,700.00.₹110,000.00Current price is: ₹110,000.00.Add to cart- 1100W power output
- Biggest in the class 12-inch subwoofer for low frequency.
- 1.5-inch x10 slim line array speaker for high frequency.
- Digital mixer (3 mono mic/line + 1 stereo line)
- Multi band comp œMODE for master output.
- 1-knob EQ per channel.
- High resolution SPX digital reverb (4 types, parameter control).
- Priority Ducker for stereo channel.
- 4 band PEQ per channel via remote control APP œSTAEGPAS Controller.
- 2x Hi-Z (high impedance) inputs.
- Link out and monitor out.
- Dedicated cover included.
- Optional reverb foot switch (FC5).
- Optional dolly (DL-SP1K) for more portability
-
PROEL SESSION1
Original price was: ₹44,630.00.₹42,399.00Current price is: ₹42,399.00.Add to cartMIXER Section MONO inputs 2 x MIC/LINE IN (XLR-F + 1.4″ JACK) STEREO input 1 x LINE IN (MINI-JACK) Outputs LINE OUT (XLR-M) Main EQ SUB LEVEL (SPEECH-MUSIC-BOOST) Internal Effect ECHO-DELAY MULTIMEDIA Section Player Type USB / SD / WIRELESS AUDIO player with TWS Compatible File Formats MP3 Control Interface LCD display, CONTROL buttons AMPLIFIER Section Total Peak Power 400 W Continuous Power 200 W Amplifier Type Class D Power Supply SMPS Processing Analog LOUDSPEAKER Section System Type Compact powered column system with subwoofer High Frequency Device 4 x 2.5″ (66mm) drivers Low Frequency Device 8” (200mm) woofer with 1.5” VC Angular Coverage 90° H x 60° V Frequency Response 50Hz – 18kHz Maximum SPL Output 108 dB GENERAL Specifications Construction Polypropylene Cabinet Colour Black Column system 3-pcs with fast-linking system and integral power connections Handles 1 x subwoofer top Accessories Padded bag for 3-pcs column Dimensions (WxHxD) SUB: 318x 400 x484.5 mm
COLUMN (each piece): 520 X 84 X 97.5 mmWeight 14 Kg (complete system) Power Supply 100 V-240 V~ 50/60 Hz Rated Power Consumption 100 W
Product Showcase
Reviews
There are no reviews yet.