Mackie Thump215 XT
₹76,818.00 Original price was: ₹76,818.00.₹46,000.00Current price is: ₹46,000.00.
Tech Specs
- Powered:Yes
- Channels:2-channel mixer
- LF Driver Size:15″ high-performance woofer
- HF Driver Size:1″ compression driver
- Total Power:1400W
- Inputs:2 x XLR-1/4″ combo, 1 x 1/8″ TRS
- Outputs:1 x 1/4″
- Bluetooth:Yes
- Wireless:Bluetooth
- Frequency Response:40Hz-20kHz
- Maximum Peak SPL:129dB SPL
- Software:Thump Connect 2 App
- Mounting Options:Pole Mount, Floor Wedge, M10 flypoints
- Power Source:Standard IEC AC cable
- Height:27″
- Width:17.4″
- Depth:14″
- Weight:35.1 lbs.
A New Spin on the Classic Thump Formula
Mackie’s next generation of Thump loudspeakers is redesigned from the ground up to provide you with enhanced power and utility, all at a wallet-friendly price! The Thump215XT Enhanced loudspeaker’s ultra-efficient 1,400-watt class-D amplifier pushes plenty of air through the high-performance 15-inch woofer — a design that live sound pros find is more than capable of handling most small- to medium-sized venues. Next, the 1-inch compression driver ensures that your sound is evenly dispersed, allowing the entire crowd to hear your music with crystal-clear quality. There’s even a built-in feedback eliminator to keep everything noise- and rumble-free! Plus, the Thump215XT is loaded with flexible I/O power, boasting a versatile 2-channel design that can be set up for music ducking, allowing this loudspeaker to extend its utility outside of standard musical applications into the world of public address and education. Finally, the Thump215XT’s Bluetooth compatibility gives you access to effortless music streaming, speaker linking, and enhanced parameter control via the Thump Connect 2 mobile app.
Four voicing modes and Bluetooth compatibility
No matter what live sound environment you’re in, the Thump 215XT’s four application-specific voicing modes have you covered! Music, Live, Club, and Monitor modes optimize your system to excel in any type of venue, and there’s even an Indoor/Outdoor mode setting if you’re looking to take your band’s sound to an outside gig. If you’re after even greater sonic control, then the Thump215XT’s Bluetooth connectivity allows you to stream, link speakers, and access additional sound-shaping features like system EQ, levels, mutes, and much more via the Thump Connect 2 app.
Ultra-efficient class-D power
The Mackie Thump215XT’s ultra-efficient class-D amplification kicks out a powerful sound that defies this loudspeaker’s modest size! A 15-inch woofer dishes out plenty of low-end punch, and the 1-inch compression driver ensures that your sound is evenly dispersed across the entire venue. Lastly, Mackie’s built-in feedback eliminator all but eradicates unwanted speaker screech and rumble, maximizing your sonic potential and ensuring that your show runs smooth from start to finish.
Portable design for easy setup and transport
Weighing in at 35-pounds, the Thump215XT is compact and lightweight, making it easy to transport. The Thump215XT’s small and portable size will ensure that you won’t need a road crew to mount it on a pole or pack it into your car. What’s more, the Thump215XT is housed in a super-tough road-ready enclosure, so don’t think that its light weight makes it fragile!
Mackie Thump215XT Enhanced 1,400-watt Powered Loudspeaker Features:
- 1,400W of class-D amplification is more than loud enough for most small- to medium-sized venues
- 15-inch woofer and 1-inch compression driver deliver a full-range sound with plenty of low end
- Flexible I/O, versatile 2-channel design, and a through output for a wide range of configurations
- Music ducking mode is ideal for public address and education settings
- Angled design is perfect for floor monitoring, but can also be mounted on a standard pole setup
- 4-application specific voicing modes with Indoor/Outdoor modes to excel in any situation
- Bluetooth connectivity allows for music streaming and effortless linking of speakers
- Thump Connect 2 App gives you access to enhanced sound-shaping and utility controls
- Lightweight 35-pound design offers effortless portability
- Signature Mackie durability to withstand the rigors of the road
- Built-in feedback eliminator reduces unwanted screech and rumble
You must be logged in to post a review.
Related products
-
Alto Professional TX315
₹63,980.00Original price was: ₹63,980.00.₹33,590.00Current price is: ₹33,590.00.Add to cartKey features
- 700 Watts peak (350 Watts continuous) Class D power
- The 90 H x 60 V horn delivers greater coverage
- The full grille delivers style and provides protection for your investment.
- 15-inch (381 mm) LF driver, 2-inch (51 mm) voice coil
- 1-inch (25.4 mm) titanium HF compression driver
- Lightweight, portable design for main or wedge monitor operation
- Standard speaker pole socket
- Bi-amplified design with precision active crossover and EQ
- Balanced XLR Mic/Line input, Link Output and Volume control
- Integrated analog limiter and overload protection circuitry
- Contour switch with low- and high-frequency +3dB boost
- Ground-lift switch removes unwanted hum or buzz
- Designed and tuned in the USA
-
YAMAHA DBR12 12-INCH 2-WAY POWERED LOUDSPEAKER
₹55,300.00Original price was: ₹55,300.00.₹41,400.00Current price is: ₹41,400.00.Add to cartDBR12
General specifications Speaker type 2-way, Bi-amp powered speaker, Bass-reflex type Frequency range (-10dB) 52Hz – 20kHz Nominal coverage H 90° V 60° Components LF Diameter:12″ cone, Voice Coil:2″, Magnet:Ferrite HF Diaphragm:1.4″, Type: 1″ throat compression driver, Magnet:Ferrite Crossover 2.1kHz: FIR-X tuning™ (linear phase FIR filter) Output power Dynamic:1000 W (LF: 800 W, HF: 200 W) / Continuous: 465 W (LF: 400 W, HF: 65 W) Maximum output level (1m; on axis) 131dB SPL I/O connectors INPUT1: Combo x1, INPUT2: Combo x 1 + RCA pin x 2 (Unbalanced), OUTPUT: XLR3-32 x 1 (CH1 Parallel Through or CH1+CH2 Mix) Processors D-CONTOUR: FOH/MAIN, MONITOR, OFF Heat dissipation Fan cooling, 4 speeds Power requirements 100 V, 100-120V, 220-240 V, 110/127/220V (Brazil), 50/60Hz Power consumption 74W(1/8 Power Consumption), 18W(Idle) Cabinet material Plastic Finish Black Handle Side x 2 Flying and mounting hardware Bottom x 2, Rear x 1 (Fit for M8 x 15 mm eyebolts) Pole socket 35mm (Bottom x 1) Dimensions W 376mm (14.8″) H 601mm (23.7″) D 348mm (13.7″) Net weight 15.8 kg (34.8 lbs) Accessories BBS251, BCS251, BWS251-300, BWS251-400 (Optional Speaker bracket) -
PROEL SESSION6
₹318,955.00Original price was: ₹318,955.00.₹303,000.00Current price is: ₹303,000.00.Add to cartSystem System Type Portable Powered 2.1 System with Two Line Array Tops and One Subwoofer Maximum SPL Output 128 dB peak system output (pink noise) Frequency Response (-10dB) 38Hz – 20kHz Speakers LF Driver 2 x 10″ (254mm) woofer HF Driver 12 x 3.25″ (82mm) neodymium drivers (6 for each TOP) Coverage Pattern 120° x 60° Amplifier Type Class D with SMPS System Power Rating 600 Watts LF, 2×300 Watts HF Continuous, 2400W Peak Channels 2 MIC/LINE selectable inputs Connectors 2 x COMBO (INPUTS), 2 x XLR-M (LINK), 2 x SPEAKON (POWER OUTPUTS) Controls 1 x LCD with Data Encoder Processing 24bit / 48KHz CORE DSP, 2-band EQ Selectable CONFIGURATION and EQ PRESETS, Digital Limiting Wireless Audio Bluetooth built-in receiver General Specifications Cabinet Material Plywood Finishing High-strenght polyurethane black paint Grille Powder coated perforated steel Handles 2 x sides (SUB) Pole Socket 1 x top M20 (SUB), 1 x bottom 35mm (TOP) Included Accessories M20 / 35mm telescopic pole, 4-wire SPEAKON/SPEAKON cable, PADDED BAG for SAT AC input 230 VAC or 120 VAC 50/60 Hz with LINE VOLTAGE selector Dimensions (W x H x D) TOP: 112x616x132 mm, SUB: 420x580x490 mm Weight TOP: 4.5 kg (9.9 lbs), SUB: 26.5 kg (58.4 lbs) -
PROEL V12PLUS
₹56,390.00Original price was: ₹56,390.00.₹53,571.00Current price is: ₹53,571.00.Add to cartSystem type 2-way vented enclosure High Frequency Device 1” neodimyium compression driver Low Frequency Device 12” woofer with 2.5” voice coil Angular Coverage 90° H x 60° V Total peak power 600 W HF Amplifier Continuous Power 50 W Class AB LF Amplifier Continuous Power 250 W Class D Power Supply SMPS Processing Analog Frequency Response 50 Hz – 20 kHz Max SPL 124 dB Connectors IN: COMBO, LINK: XLR M Controls LEVEL, LINE/MIC selector, LOW EQ, HIGH EQ, GND LIFT, FRONT LED selector Monitor Taper 44° Flying System 4 x M10 – top/bottom Construction Polypropylene Cabinet Colour Black Handles 1 x top Mounting Pole 1 x bottom Power Supply 230 VAC or 120 VAC 50/60 Hz
Reviews
There are no reviews yet.