Product Showcase
Sale!
Mackie MR824 8″ Powered Studio Monitor
Original price was: ₹42,008.00.₹26,000.00Current price is: ₹26,000.00.
Product Details
- Designed for superior mix translation and accuracy for professional results in any studio
- Equipped with Mackie’s proven logarithmic waveguide design
- 1” silk dome tweeter provides fast transient response for detailed high end and vocal clarity
- 8” polypropylene woofer delivers responsive, dynamic low frequency response
- 85 watts of bi-amplified Class A/B amplification
- Frequency response: 35 Hz – 20 kHz
Artists, engineers, and content creators like you are more innovative than ever, and we know how much you rely on your gear to express your creativity. MR Series monitors bring you closer to your music and your mix than ever before to deliver professional results without breaking the bank.
You must be logged in to post a review.
Related products
-
Kali Audio IN-5 (Pair)
Original price was: ₹99,500.00.₹89,990.00Current price is: ₹89,990.00.Add to cartFeatures:
- 5-inch powered studio monitor with coaxial 1-inch textile-dome tweeter and 4-inch optimized-profile midrange driver
- Tri-amped design with integrated Class D power amp
- Ruler-flat frequency response — there’s nothing hyped about this speaker
- Exhibits negligible levels of distortion — a full 6dB lower than its nearest competitor
- Boasts 20dB of headroom while playing continuously at 85dB
- Large magnets and voice coils produce super-accurate low-end response and impressive low-frequency extension
- Coaxial design exhibits superb directivity — better than any non-coaxial design —covering your entire room uniformly
- Low-noise port tube yields clean, punchy bass with zero chuffing
- Boundary EQ allows you to tailor the speaker to any environment
- LF/HF trims for fine-tuning the speaker’s response
- Balanced XLR and TRS inputs, and an unbalanced RCA input
-
Dynaudio Core 59 (Single)
Original price was: ₹456,300.00.₹409,990.00Current price is: ₹409,990.00.Add to cart- Studio Refernec Monitor with 1″ Esotar Pro tweeter, 5″ midrange, 9.5″ woofer
- Class D Pascal tri-amplification: HF 150 watts / MF 500 watts / LF 500 watts
- Frequency response: 42Hz–21kHz ±3dB (36Hz–24kHz -6dB)
- Core DSP optimizes imaging, balance, and bass extension
- Sampling rate: 192kHz, resolution: 64-bit; dependent on input signal
- Maximum SPL: 112dB at 1m anechoic, 118dB half space
- Analog and digital inputs
- Front-loaded bass reflex cabinet design
- All drivers handcrafted by Dynaudio in Denmark
-
Focal Shape Twin (each)
Original price was: ₹157,290.00.₹149,500.00Current price is: ₹149,500.00.Read moreSystem SHAPE TWIN Frequency response (+/- 3dB) 40Hz – 35kHz Maximum SPL(of musical signals) 110.5dB SPL(peak at @ 1m) Electronics Inputs /Impedance Type RCA connectors XLR: balanced 10 kOhms unbalanced 10 kOhms with sensitivity compensation Mid-range and low frequency amplifier 2 x 80W, class AB High frequency amplifier 50W, class AB Automatic standby Off Deactivate standby Approximately 30 minutes with no signal Signal detection > 3mV Power supply Voltage Connexion 220-240V (fuse T2AL / 250V) or 100-120V (fuse T3.15AL / 250V) IEC connector and detachable power cable Settings High-pass filter Bass level(0 – 250Hz) Midrange/bass(160 Hz, Q=1) Treble level(4.5 – 35kHz) Power on/of Adjustable Full range 45/60/90Hz Adjustable, +/-6 dB Adjustable, +/-3 dB Adjustable, +/-3 dB On/off switch on rear panel Power consumption in standby < 0.5W Displays and controls LED for power on/off and standby Transducers Woofers 2 x 5′ (13cm) Flax Cone woofers Tweeter 1′ (25mm) ‘M’-shaped Aluminum/Magnesium Cabinet Construction 0.6′ (15mm) MDF Finish Vinyl, real walnut and black paint Dimensions including 4 rubber feet (HxLxD) 18.8 x 8.3 x 11′ (478 x 211 x 279mm) Weight 24lbs (11kg) Recommended mounting kits Wall mounting kit K&M® 24471 + K&M® 24359 adapter Ceiling mounting kit K&M® 24496 + K&M® 24359 adapter -
Dynaudio Core 47 (Single)
Original price was: ₹372,200.00.₹335,990.00Current price is: ₹335,990.00.Add to cart- Loaded with proprietary 1″ Esotar Pro tweeter coupled with 4″ mid- and 7″ low-frequency MSP (Magnesium Silicate Polymer) drivers
- Class D Pascal tri-amplification HF 150W/MF 500W/LF 500W for massive headroom
- Front-loaded bass reflex cabinet for tight, focused lows and solid imaging
- Analog and AES3 digital inputs let you keep your signal digital right to the end
- 24-bit sampling rate and 192kHz resolution; dependent on input signal
- Core DSP optimizes imaging, balance, and bass extension
- All drivers handcrafted by Dynaudio in Denmark
Reviews
There are no reviews yet.