Kali Audio LP-6 V2 (Pair)
₹47,990.00 Original price was: ₹47,990.00.₹39,990.00Current price is: ₹39,990.00.
- For Content Creators and Pro Mixers
- Pro Performance at Wallet-Friendly Price
- For Stereo or Immersive Mixing Formats
- TRS, XLR & RCA Inputs
- 3D Imaging via Advanced Wave Guide
- Accurate Frequency Reproduction
- Clean Class-D Bi-Amplification
- High Headroom for Nearfield Monitors
- Low-Noise Port Tube
- Updated Boundary EQ Settings
Styled in black, the Kali LP-6 V2 is a studio monitor (single monitor) that puts the ability to achieve excellent mixes within anyone’s grasp. This monitor helps content creators and professionals deliver exceptional mixes by providing an advanced waveguide for 3D imaging, clear sound reproduction throughout the frequency range, low-noise performance, and sensitivity that reaches levels necessary for creating punchy and fully realized products.
This is the second generation of the Lone Pine series, delivering lower-noise, higher sensitivity, a smoother high-end, and a consistently accurate low-end than the original monitor. Furthermore, the Boundary EQ settings have all been updated based on user-feedback, delivering tuning options more tailored for real-world scenarios.
3-D Waveguide
The 3-D Imaging Waveguide allows you to hear a 3-D soundstage from a stereo pair of speakers, so you will have to purcahse an additional monitor so you have two to use the Waveguide. By matching the shape of the waveguide to the interactions of the HF and LF drivers, this waveguide produces a stereo image that is wider, taller, and deeper than the space where the speakers are placed.
The LP-6 accomplishes this by ensuring that the speaker’s reflected sound matches its direct sound. Every time you hear a loudspeaker, you’re hearing both the direct sound from the speaker, and reflections from the speaker’s signal bouncing off of objects in the room. When those reflections are congruent with the direct sound from the speaker, listeners perceive a better sound overall, and are able to make out very subtle details like where microphones are placed in a room. When done well, the stereo image will sound three-dimensional.
All of this should give you a high degree of confidence in your mix. It allows you to mix faster, and produce better mixes overall.
Clear-Sounding Voice Coil
The voice coil on the LP-6 allows the speaker to have very high excursion, resulting in clearer sound with lower harmonic distortion, and a high degree of detail.
Low-Noise Port Tube
On most port tubes, air leaves at different speeds from different points of the opening, creating noisy turbulence. This turbulence can be heard as chuffing, or an audible air sound coming from the monitor. This sound will add to the noise floor and obscure the details of the low end.
The port tube on the LP-6 was designed to ensure that all of the air leaves the port tube at the same velocity. This helps add to the low-end response of the speaker, while keeping the bass clean, tight, and devoid of extra noise.
High Output
The LP-6 is capable of 85 dB continuous output, with 20 dB of dynamic headroom from as far as 2.2m. This makes it an excellent choice as a main, side surround, or overhead speaker in most small-to-medium-sized mixing rooms.
Accurate Bass
Bass on the LP-6 is delivered by a magnet and voice coil larger than much of the competition at comparable price points. This gives you more accurate bass response that extends lower, so you can dial in exactly the low-end sound you need. Nothing is over-represented, and the bass that is present on your track will come through with clarity and punch.
Boundary EQs
Kali’s team came up with boundary compensation EQ settings at the Village Recorder in Los Angeles to help you get the optimum sound for where you need to put your speakers. Combined with the LF and HF trims, these boundary settings will ensure that the speakers sound their best no matter what room you’re mixing in.
There are EQ settings for:
Free Space
Speakers on stands, against a wall
Speakers on a desk, away from a wall
Speakers on a desk, against a wall
Speakers on a console meter bridge
Speakers on a studio desk
Clean, Class-D Power
The integrated 40W + 40W Class-D Power amp delivers clean, reliable power that’s optimized to this speaker. The new 2nd Wave amplifier platform delivers all this with significantly lower idle noise, and better sensitivity than the original version.
Balanced and Unbalanced Inputs
The LP-6 features balanced XLR and TRS inputs, as well as an unbalanced RCA input. The RCA input can be set to -10 dBu sensitivity when you’re using consumer devices like a laptop or smartphone’s headphone jack.
Upgrades over V1
The new LP-6 V2 is part of Kali’s 2nd Wave of loudspeakers. 2nd Wave products draw on 3 years of R&D for across-the-board improvements. A new amplifier platform allows for 12 dB less self noise, while input sensitivity has been increased by 3 dB, for +3 dB SPL overall compared to the original.
The tuning has been refined for smoother HF response, and the boundary EQs have been updated to reflect common real-world use cases. Physical improvements include lighter transducer cones for better transient response and upgraded cabinet construction for greater reliability.
You must be logged in to post a review.
Related products
-
Focal Trio11 Be (each)
₹481,025.00Original price was: ₹481,025.00.₹456,974.00Current price is: ₹456,974.00.Add to cartPerformance Frequency response 3-way mode 30Hz – 40kHz (+/- 3dB) 2-way mode (Focus) 90Hz – 20kHz (+/- 3dB) Maximum SPL 3-way mode 118dB (peak @ 1m) 2-way mode (Focus) 105dB (peak @ 1m) Electronics Inputs Type/Impedance Connectors
SensitivityElectronically balanced / 10KOhms
XLR
Adaptable, +4 dBu or -10 dBvBass
Midrange
Treble300W, class G
150W, class G
100W, class ABPower supply Local supply
Wiring230V (1.6A T fuse) – 115V (3.5A T fuse)
Connection Detachable IEC inlet power cordindicators and controls Rear panel Input sensitivity selector (+4dBu/-10dBV)
Low frequency shelving (+/- 3dB from 35 to 250Hz)
High frequency shelving (+/- 3dB from 4.5 to 40kHz)
Low-mid EQ frequencies (+/- 3dB to 160Hz, Q factor = 1)
FOCUS input / FOCUS outputAuto standby Auto standby switch on the back of the loudspeaker: enable / disable switch LED Focus power on, clipping and default LED on front panel Transducers Subwoofer 10W96701D
Focal 913/16′ (25cm) speaker driver with ‘W’ composite sandwich coneMédium 5W04701
Focal 51/8′ (13cm) speaker driver with ‘W’ composite sandwich coneTweeter TB872
Focal 1′ pure Beryllium inverted dome tweeterCabinet Construction 13/16 and 13/16′ (21mm and 30mm) panels with internal braces Finish Natural veneering side panels Dark red burr ash, black body Dimensions with four rubber feet (HxDxW) 25′ x 139/16′ x 173/4′ (635 x 345 x 450mm) Weight 82.2lbs (37.3kg) -
Focal Trio6 ST6 (each)
₹367,250.00Original price was: ₹367,250.00.₹348,887.00Current price is: ₹348,887.00.Add to cartPerformance Frequency response 3-way mode 35Hz – 40kHz (+/- 3dB) 2-way mode (Focus) 90Hz – 20kHz (+/- 3dB) Maximum SPL 3-way mode 115dB SPL (peak at 1m) 2-way mode (Focus) 105dB SPL (peak at 1m) Electronic section Inputs Type / Impedance Connector Sensitivity Electronically balanced / 10 kOhms XLR Adjustable, +4dBu or -10dBV Bass
Midrange
Treble200W, class G
150W, class G
100W, class ABPower supply Main voltage Wiring 230V (class T fuse 1.6A fuse rating) – 115V (class T fuse 3.5 A fuse rating) Detachable IEC power cable Indicators and controls Rear panel Input sensitivity selector (+4dBu/-10dBV)
Low frequency shelving (+/- 3dB from 35 to 250Hz)
High frequency shelving (+/- 3dB from 4.5 to 40kHz)
EQ low-mid frequencies (+/- 3dB at 160Hz, Q factor = 1)
FOCUS input / FOCUS outputLED Focus mode on, audio clipping and protection indicated by LED on front panel Transducers Subwoofer 8W64701 8′ Focal driver with W composite sandwich cone Woofer 5W04701 5′ Focal driver with W composite sandwich cone Tweeter TB872, 1′ Focal pure Beryllium inverted dome tweeter Cabinet Structure 22mm (0.86′) reinforced panels Finish Dark Red natural Burr-ash veneering side panels, Black body Dimensions including 4 rubber feet (HxWxD) 201/2′ x 1015/16′ x 143/16′ (520 x 278 x 360mm) Weight 44 lbs (20 kg) -
Focal Twin6 ST6 (Each)
₹263,370.00Original price was: ₹263,370.00.₹250,202.00Current price is: ₹250,202.00.Add to cartKey points
• Beryllium inverted dome tweeter: very low directionality, excellent linearity and dynamics
• Optimised baffle tweeter: excellent dispersion control
• Composite sandwich ‘W’-cone: sound neutrality, no distortion
• Focus mode: two monitors in one; 2-way monitor and 1-way full-range monitor (woofer alone)
• Large laminar port: no port noises or distortion
• Automatic disengageable stand-by mode
• Settings: activatable/deactivatable, LF shelving, HF shelving, LMF @ 160Hz
-
Dynaudio Core 7 (Single)
₹230,900.00Original price was: ₹230,900.00.₹207,990.00Current price is: ₹207,990.00.Add to cart- Studio Reference Monitor with 1″Esotar Pro, 7″ mid/woofer
- Class D Pascal bi-amplification HF 150 watts / LF 500 watts
- Frequency response: 44Hz–21kHz ±3dB (38Hz–24kHz -6dB)
- Core DSP optimizes imaging, balance, and bass extension
- 24-bit sampling rate and 192kHz resolution
- Maximum SPL: 112dB at 1m anechoic, 118dB half space
- Analog and AES3 digital inputs
- Front-loaded bass reflex cabinet
- All drivers handcrafted by Dynaudio in Denmark
Reviews
There are no reviews yet.