Product Showcase
Genelec 8050B Bi-Amplified Loudspeaker System Capable of producing peak SPL of over 120 dB per pair, and with a low frequency response extending down to 35 Hz, the 8050B is a powerful wideband bi-amplified monitoring system Our Intelligent Signal Sensing (ISS) feature, reduces power consumption to less than 0.5 watts by automatically switching the active monitor to standby, when no audio signal has been detected for some time.
When it receives an audio signal again, the loudspeaker turns back on ISS is fully compliant with the latest EU requirements and the ErP 2013 Directive for electronic devices.
It is an excellent tool for large recording studios, broadcast and surround installations, mastering suites and TV and post-production houses The sophisticated low level active crossover has versatile controls for matching the monitor to difficult acoustic environments.
Dedicated very low distortion amplifiers power the drivers, with overload protection for each driver The stiff, volume efficient MDE (Minimum Diffraction Enclosure) enclosure and long, curved, flow optimized reflex port combined with low distortion drivers provide solid, clear, low frequencies with a minimum of compression, distortion and port noise artifacts.
The gently curved sided and front MDE enclosure and advanced Genelec Directivity Control Waveguide (DCW) provide exceptionally smooth on and off axis frequency responses, precise imaging and optimal directivity across the whole audio spectrum Mounting of the 8050B is easy using the included Iso-Pod(Isolation Positioner/Decoupler) which eliminates coloration of the sound by decoupling the monitor from its mounting surface.
The monitor can be tilted on the Iso-Pod to point the acoustic axis directly at the listening position Other mounting options are possible using the integrated mounting point on the rear of the enclosure, or the M10 threaded hole on its base.
Genelec 8050B Specifications: Maximum sound pressure level: 110 db Frequency response: 38 Hz – 20 khz (± 2 db), 35 Hz – 21 khz (-3 db) Crossover frequency: 1.8 khz Driver dimension: Bass 8 in + Treble 1 in, Metal dome + DCW Amplifier power: Bass 150 W + Treble 120 W Dimensions: H x W x D 452 x 286 x 278 mm with Iso-Pod Weight: 12.7 Kg (28 lb) Connectors: 1 x XLR analog in Made in Finland.
You must be logged in to post a review.
Related products
-
Dynaudio Core 7 (Single)
Original price was: ₹288,800.00.₹259,900.00Current price is: ₹259,900.00.Add to cart- Studio Reference Monitor with 1″Esotar Pro, 7″ mid/woofer
- Class D Pascal bi-amplification HF 150 watts / LF 500 watts
- Frequency response: 44Hz–21kHz ±3dB (38Hz–24kHz -6dB)
- Core DSP optimizes imaging, balance, and bass extension
- 24-bit sampling rate and 192kHz resolution
- Maximum SPL: 112dB at 1m anechoic, 118dB half space
- Analog and AES3 digital inputs
- Front-loaded bass reflex cabinet
- All drivers handcrafted by Dynaudio in Denmark
-
Kali Audio IN-5 (Pair)
Original price was: ₹99,500.00.₹89,990.00Current price is: ₹89,990.00.Add to cartFeatures:
- 5-inch powered studio monitor with coaxial 1-inch textile-dome tweeter and 4-inch optimized-profile midrange driver
- Tri-amped design with integrated Class D power amp
- Ruler-flat frequency response — there’s nothing hyped about this speaker
- Exhibits negligible levels of distortion — a full 6dB lower than its nearest competitor
- Boasts 20dB of headroom while playing continuously at 85dB
- Large magnets and voice coils produce super-accurate low-end response and impressive low-frequency extension
- Coaxial design exhibits superb directivity — better than any non-coaxial design —covering your entire room uniformly
- Low-noise port tube yields clean, punchy bass with zero chuffing
- Boundary EQ allows you to tailor the speaker to any environment
- LF/HF trims for fine-tuning the speaker’s response
- Balanced XLR and TRS inputs, and an unbalanced RCA input
-
Focal Solo6 Be (each)
Original price was: ₹165,068.00.₹160,000.00Current price is: ₹160,000.00.Read morePerformance Frequency response 40Hz – 40kHz Maximum SPL 113dB SPL (peak @ 1m) Electronic section Inputs Type / Impedance Connector Sensitivity Electronically balanced / 10 kOhms XLR Adjustable, +4dBu or -10dBV Bass – Midrange Treble 150W rms, BASH® technology 100W rms, class AB Power supply Local supply Connection 230V (1.6A fuse rating)115V (3.5A fuse rating)IEC inlet and detachable power cord IEC inlet and detachable power cord User controls and indicators Input sensitivity selection switch Adjustable tweeter and woofer levels by potentiometers On/off switch, voltage selector Light indicator Power On LED Transducers Woofer 6W4370B, 61/2′ (16.5cm) Focal “W” composite sandwich cone drivers High frequency TB871, Focal Beryllium inverted dome tweeter Shielding Integral through cancellation magnets / cans or by magnet design Cabinetwork Construction 71/2′ (19mm) MDF panels Finish Dark red natural veneering side panels, black body Dimensions (HxLxD) 13 x 97/16 x 117/16′(330mm x 240mm x 290mm) Weight 24.2lb (11kg) -
Dynaudio LYD 8 (Black)
Original price was: ₹129,800.00.₹116,990.00Current price is: ₹116,990.00.Add to cart- Nearfield Monitor with 8″ Woofer
- Bi-amped speaker design with 50W HF/80W LF and state-of-the-art Class-D amplification
- Bass extension setings to extend or curtail the low end frequency response
- Two different tunings: one for free standing and one designed for speakers within 50 cm of wall
- Sound balance to influence the overall response of the speaker
- Handmade in Denmark
Reviews
There are no reviews yet.