Product Showcase
Genelec 8020D 4 inch Powered Studio Monitor – Single
₹92,000.00
8020D Technical Specifications
SPL
100 dB
Amplifier Power
50 W Bass (Class D) + 50 W Treble (Class D)
Frequency Response
56 Hz – 25 kHz (“-6 dB”)
Accuracy of Frequency Response
± 2.5 dB (62 Hz – 20 kHz)
Weight
3.2 kg / 7.1 lb
Connections
1 x XLR Analog Input
Available on backorder
Frequency Response
62 Hz – 20 kHz (± 2.5 dB)
Low cutoff -6dB
56 Hz
High cutoff -6dB
25 kHz
SPL
Peak SPL
≥107 dB
Maximum peak acoustic output per pair, at 1 m distance with music material.
Short term max SPL
≥100 dB
Maximum short term sine wave acoustic output on axis in half space, averaged from 100 Hz to 3 kHz at 1 m.
Long term max SPL
≥93 dB
Maximum long term RMS acoustic output in same conditions with IEC weighted noise (limited by driver unit protection circuit) at 1 m.
Self-generated noise
Self-generated noise
≤5 dB SPL
Self generated noise level in free field at 1 m on axis.
Weight
Weight
3.2 kg (7.1 lb)
Dimensions
Height
230 mm (9 in)
Height with Iso-Pod
242 mm (9 1/2 in)
Width
148 mm (5 7/8 in)
Depth
142 mm (5 5/8 in)
Enclosure
Enclosure material
Die cast aluminium
Enclosure type
Reflex port
Drivers
Driver type
Cone
Diameter
105 mm (4 1/8 in)
Driver type
Metal dome
Diameter
19 mm (3/4 in)
You must be logged in to post a review.
Related products
-
Focal Twin6 ST6 (Each)
Original price was: ₹308,015.00.₹292,000.00Current price is: ₹292,000.00.Read moreKey points
• Beryllium inverted dome tweeter: very low directionality, excellent linearity and dynamics
• Optimised baffle tweeter: excellent dispersion control
• Composite sandwich ‘W’-cone: sound neutrality, no distortion
• Focus mode: two monitors in one; 2-way monitor and 1-way full-range monitor (woofer alone)
• Large laminar port: no port noises or distortion
• Automatic disengageable stand-by mode
• Settings: activatable/deactivatable, LF shelving, HF shelving, LMF @ 160Hz
-
Dynaudio LYD 8 (Black)
Original price was: ₹129,800.00.₹116,990.00Current price is: ₹116,990.00.Add to cart- Nearfield Monitor with 8″ Woofer
- Bi-amped speaker design with 50W HF/80W LF and state-of-the-art Class-D amplification
- Bass extension setings to extend or curtail the low end frequency response
- Two different tunings: one for free standing and one designed for speakers within 50 cm of wall
- Sound balance to influence the overall response of the speaker
- Handmade in Denmark
-
Focal Shape 65 (each)
Original price was: ₹123,065.00.₹116,000.00Current price is: ₹116,000.00.Read moreSystem SHAPE 65 Frequency response (+/-3dB) 40Hz – 35kHz Maximum SPL (musical signal) 109dB SPL (peak @ 1m) Electronic section Inputs/ Impedance Type XLR: balanced 10kOhms Connectors RCA: unbalanced 10kOhms with sensitivity compensation Midrange and low frequency amplifier 80W, class AB High frequency amplifier 25W, class AB Automatic standby Standby on After approximately 30 minutes with no signal Standby off Signal detection > 3 mV Electrical supply Voltages 220-240V (T1AL / 250V fuse) or 100-120V (T2AL / 250V fuse) Connection IEC plug and detachable power cord Settings High pass filter Adjustable Full range 45/60/90Hz Bass(0 – 250Hz) Adjustable, +/-6dB Midrange/bass(160Hz, Q=1) Adjustable, +/-3dB SHAPE 65 Wall mount K&M® Fixing kit 24471 + K&M® 24357 adapter Ceiling mount K&M® Fixing kit 24496 + K&M® 24359 adapter Settings
High (4.5 – 35kHz) Adjustable, +/-3dB Power On/Power Of Settings High (4.5 – 35kHz) Adjustable, +/-3dB Power On/Power Of On/off switch on rear panel Standby consumption< 0.5W Displays and controlsLED for power on/off and standbyTransducers Woofer6.5′ (16,5cm) Flax ConeTweeter 1′ (25mm) ‘M’ profile Aluminum-MagnesiumCabinet Construction0.6′ (15mm) MDF FinishVinyl, real walnut and black paintingDimensions with four rubber feet (HxWxD) 14 x 8.6 x 11.2′ (355 x 218 x 285mm)Weight 28.2lb (8.5kg)On/off switch on rear panel
-
Dynaudio Core 47 (Single)
Original price was: ₹372,200.00.₹335,990.00Current price is: ₹335,990.00.Add to cart- Loaded with proprietary 1″ Esotar Pro tweeter coupled with 4″ mid- and 7″ low-frequency MSP (Magnesium Silicate Polymer) drivers
- Class D Pascal tri-amplification HF 150W/MF 500W/LF 500W for massive headroom
- Front-loaded bass reflex cabinet for tight, focused lows and solid imaging
- Analog and AES3 digital inputs let you keep your signal digital right to the end
- 24-bit sampling rate and 192kHz resolution; dependent on input signal
- Core DSP optimizes imaging, balance, and bass extension
- All drivers handcrafted by Dynaudio in Denmark
Reviews
There are no reviews yet.