Product Showcase
Sale!
Focal Sub6 (each)
Original price was: ₹175,605.00.₹166,824.00Current price is: ₹166,824.00.
| Performance | ||||||||
| Frequency response | 30Hz – 250Hz | |||||||
| Maximum SPL | 116dB SPL (peak @ 1m) | |||||||
| Electronic section | ||||||||
| Inputs |
|
|
||||||
| Outputs (towards satellites) | Type/Impedance Connector |
Right, left Electronically balanced / 50 Ohms XLR 3 points plug |
||||||
| Amplification | 350W rms, BASH ® technology | |||||||
| Signal internal treatment and functions | Subwoofer section | Mono right/left summation LFE + mono low-pass 24dB / octave Phase adjustment Polarity selection switch Switch high-pass filter, cut-off frequency selection |
||||||
| Control | Adjustable subwoofer level Low-pass cut-off frequency setting Phase adjustment Polarity adjustment Subwoofer switch (mute) 2.1 “Bypass” (external remote control) High-pass frequency selection Releasable high-pass |
|||||||
| Visualization (LED) | Power On Subwoofer switch(mute) Released high-pass | |||||||
| Power supply |
|
|
||||||
| Transducers | ||||||||
| Subwoofer | 11W7670, 105/8′ (27cm) Focal “W” composite sandwich cone driver | |||||||
| Cabinetwork | ||||||||
| Construction | 71/2′ (19mm) MDF panels | |||||||
| Finish | Dark red natural veneering side panels, black body | |||||||
| Dimensions (HxLxD) | 1415/16 x 139/16 x 175/16′ (380mm x 344mm x 440mm) | |||||||
| Weight | 50.7lb (23kg) |
Out of stock
11″ Subwoofer
The Sub6 is a large volume cabinet design, equipped with an 11″” woofer and a rear laminar port. This configuration guarantees bass linearity whatever the intended SPL.
The control board is extremely versatile, with connectivity which allows a 2.1, 2.2 and multichannel use via the L/R inputs and outputs and the LFE.
The numerous settings such as the high-pass crossover dedicated to monitors, the adjustable phase and level control provide optimum coupling with the Solo6 Beand the Twin6 Be monitors. And finally, a small, but important point: the footswitch input. It enables one to connect a pedal to deactivate the subwoofer and the high-pass crossovers on the outputs that supply the monitors. This simplifies and greatly improves control during the different stages in monitoring.
Connectivity – for optimal integration
The Sub6 monitor loudspeaker was developed to perfectly complement the acoustics of Focal monitoring loudspeakers. It features numerous settings such as a stereo high-pass crossover (75Hz – 100Hz) specific to left and right loudspeakers, a configurable low-pass filter with mono summation, a phase inverter, adjustable phase and even a MUTE switch. The various connectivity options enable use in 2.1, 2.2 and multi-channel modes, via the L/R inputs and outputs, and the LFE input.
Footswitch -the ‘little extra’ which makes the difference
A major advantage of the Sub6 is its footswitch input. This allows you to connect a footswitch which cuts off the subwoofer and deactivates the high-pass crossovers on the outputs powering the monitors. The footswitch input enables you to compare the sound of a 2.1 set-up (Sub6 filtered + monitors filtered by the Sub6) with that of a 2.0 set-up (subwoofer deactivated + monitors in wideband mode). The two versions can be compared instantly, simply by pressing the footswitch: you barely have to move a muscle.
The “W” cone
Focal has been developing the technologies of composite sandwich cones for more than 15 years. The “”W”” process (Glass/Foam/Glass), used on the SM11, SM8 and SM6 lines, provides a true optimiza a true optimization of the frequency response by fine tuning of mass, rigidity and damping parameters. The balance between these 3 fundamental and often contradictory parameters is at the base of the outstanding sound neutrality of our speakers. The 105/8″”(27cm) Focal speaker is equipped with a high excursion system to enable accurate and extended reproduction in the bass/ infra bass register. The 25/8″” (66mm) diameter and 11/4″” (32mm) height voice coil ensures a perfect mechanical coupling and a total control of the driver even at high sound level. The magnetic construction made of double ferrite and large field and back plates offers high symmetrical magnetic field to keep dynamics even at very low frequency.
A custom designed amplification stage
Designing an amp to be integrated inside a speaker requires a very different set of rules than for a traditional amp. Speaker size and cooling concerns are often in contradiction with the high quality and high power requirements of a sonically transparent speaker. Our engineers used the BASH® technology to develop the bass/medium amplification circuit for the SM6 professional line of speakers. This was the only way to exploit the best of class AB style circuits (for exceptional quality) with a class D type yield, which is crucial when housing a 150W RMS circuit in such a small space (300W RMS for the Twin6 Be and 350W RMS for the Sub6).
You must be logged in to post a review.
Related products
-
Focal SUB 12 ST6 (Each)
Original price was: ₹401,800.00.₹380,000.00Current price is: ₹380,000.00.Read moreKey points
• Composite sandwich ‘W’-cone: sound neutrality, no distortion
• Large laminar port: no port noises or distortion
• Automatic disengageable stand-by mode
• Amplification: 600W RMS, 1000W peak
• Carry handle
-
Carlsbro EDA-50 Electronic Drum Amplifier
Original price was: ₹22,700.00.₹21,000.00Current price is: ₹21,000.00.Add to cartToday’s digital drum technology creates multiple tones at a very broad range of frequencies that all have to be heard simultaneously. Those distinctive sounds generated from the snare drum, tom-toms, bass drum and cymbals are all heard in the same way as the acoustic kit. We are proud of the EDA Series as they perform like a true drum amplifier should, delivering those rich, broad tones that inspire you to play more. We strongly recommend the EDA200S for that powerful sound projection, but if you are on a budget or space is tight go for the EDA50.
-
Dynaudio 9S
Original price was: ₹151,990.00.₹136,990.00Current price is: ₹136,990.00.Add to cart- 300W Powered Subwoofer
- Onboard 300-watt Class D amplifier module
- 9.5″ MSP long-throw woofer for accurate low-frequency reproduction
- Double front baffle maximizes rigidity for higher-volume listening sessions
- Frequency response: 22Hz–175Hz ±3dB
- Master/Slave feature for daisy-chaining multiple subwoofers
- Sealed-cabinet design
-
Alto Professional TX308
Original price was: ₹34,980.00.₹18,350.00Current price is: ₹18,350.00.Add to cartKey features
- 350 Watts peak, (175 Watts continuous Class D power)
- The 90 H x 60 V horn delivers greater coverage
- The full grille delivers style and provides protection for your investment.
- 8-inch (203 mm) LF driver, 1.4-inch (35.5 mm) voice coil
- 1-inch (25.4 mm) titanium diaphragm HF compression driver
- Lightweight, portable design for main or wedge monitor operation
- Standard speaker pole socket
- Bi-amplified design with precision active crossover and EQ
- Balanced XLR Mic/Line input, Link Output and Volume control
- Integrated analog limiter and overload protection circuitry
- Designed and tuned in the USA
Reviews
There are no reviews yet.