Category
- ACCESSORIES
- AUDIO INTERFACES
- BOSS
- brass and wood winds
- DJ CONTROLLERS
- DRUMS & PERCUSSION
- EFFECTS PROCESSOR
- GUITAR
- KEYBOARDS
- OTHER
- PIANO
- SPEAKER
- STOCK CLEARANCE SALE
- STUDIO/ RECORDING
- VIOLINS

Fluid Audio Image 2 – 3-way Reference Studio Monitor
₹214,240.00 Original price was: ₹214,240.00.₹203,528.00Current price is: ₹203,528.00.
- Type: Active 2-Way
- Frequency Response: 42 Hz – 27 kHz (+/- 3 dB)
- Crossover Frequency: 3.5 kHz
- LF Amplifier Power: 90W RMS
- HF Amplifier Power: 50W RMS
- Signal-to-Noise Ratio: > 100 dB (typical A-weighted)
- Polarity: Positive signal at + input produces outward LF cone displacement
- Input Impedance: 20 kΩ balanced, 10 kΩ unbalanced
- Max SPL: 114 dB
- Power: Factory programmed for either 100 – 120V ~60Hz, 220 – 230V ~50Hz
- Protection: RF interference, output current limiting, over-temperature, turn-on/off transient, and subsonic filter
- Cabinet: Painted MDF
- Weight: 17.8 lbs / 8.1 kg
Available on backorder
Image 2
Image 2 is a dedicated nearfield/midfield workhorse. Using the latest DSP and Class-D amplification, Fluid Audio has pushed the limits to create stunning results. The Image 2 delivers accurate imaging, extremely flat frequency response, and incredible bass extension with very low distortion.
With support for Sonarworks SoundID Reference calibration import, the room calibration software will be integrated directly into Image 2 studio monitors.
Giving users the ability to create their own calibration profile for their monitor setups to remove unwanted coloration and experience the most accurate studio reference sound for any studio or home environment.
The Image 2 is also a 2 in 1 monitor: A full range mixing and mastering system that can switch into a console “cubemix” at the press of a footswitch. Cubemix mode enables engineers to dial-in low end and midrange levels for even playback on many “bass challenged” devices. It further helps with the adjustment of vocals, nailing the kickdrums and overall balance.
It’s future-ready USB port expands the Image 2’s incredible functionality and provides the ability to upload and run exported room correction files natively at the monitor level, as well switching between profiles (Image 2 supports loading of 4 different SoundID Reference profiles) and cubemix mode.
The newly developed AMT tweeter delivers precise, detailed response, expansive headroom, and low distortion, while the aluminum cone mid-range driver utilizes a shorting ring within its motor structure to substantially reduce harmonic distortion. Focusing the magnetic flux and concentrating it within the voice coil gap reduces modulation movement of the voice coil which makes the variation of system inductances more linear as input current varies. The end result is accuracy so clean; mixing takes on a whole new flow.
The opposed, Dual 8″ ultra-long-throw bass woofers are interlocked at their magnets from within and add improved cabinet stability and provide extended bass response (+/- 4.6dB 28Hz-20kHz; +/- 2.0dB 80Hz-20kHz). Each bass driver is individually powered by the latest state of the art 225W Class-D amplifier.
Driving the entire system is the newly developed Class-D Quad amplifier. Spending the most development time on this important element, the Image 2 amp has extremely low self-noise, very low distortion, improved THD+N performance, improved IMD performance, and lower output impedance. The Image 2’s sealed enclosure design provides a natural, 6db/oct roll off for a more controlled low frequency response. This translates into less likelihood of unwanted interaction with the room, which means these monitors are less sensitive to positioning.
Mixing or mastering on the Image 2 will deliver professional results that are more accurate, and more effortlessly achieved than ever before.
You must be logged in to post a review.
Related products
-
Dynaudio Core 7 (Single)
₹288,800.00Original price was: ₹288,800.00.₹259,900.00Current price is: ₹259,900.00.Add to cart- Studio Reference Monitor with 1″Esotar Pro, 7″ mid/woofer
- Class D Pascal bi-amplification HF 150 watts / LF 500 watts
- Frequency response: 44Hz–21kHz ±3dB (38Hz–24kHz -6dB)
- Core DSP optimizes imaging, balance, and bass extension
- 24-bit sampling rate and 192kHz resolution
- Maximum SPL: 112dB at 1m anechoic, 118dB half space
- Analog and AES3 digital inputs
- Front-loaded bass reflex cabinet
- All drivers handcrafted by Dynaudio in Denmark
-
Focal Shape 65 (each)
₹123,065.00Original price was: ₹123,065.00.₹116,000.00Current price is: ₹116,000.00.Read moreSystem SHAPE 65 Frequency response (+/-3dB) 40Hz – 35kHz Maximum SPL (musical signal) 109dB SPL (peak @ 1m) Electronic section Inputs/ Impedance Type XLR: balanced 10kOhms Connectors RCA: unbalanced 10kOhms with sensitivity compensation Midrange and low frequency amplifier 80W, class AB High frequency amplifier 25W, class AB Automatic standby Standby on After approximately 30 minutes with no signal Standby off Signal detection > 3 mV Electrical supply Voltages 220-240V (T1AL / 250V fuse) or 100-120V (T2AL / 250V fuse) Connection IEC plug and detachable power cord Settings High pass filter Adjustable Full range 45/60/90Hz Bass(0 – 250Hz) Adjustable, +/-6dB Midrange/bass(160Hz, Q=1) Adjustable, +/-3dB SHAPE 65 Wall mount K&M® Fixing kit 24471 + K&M® 24357 adapter Ceiling mount K&M® Fixing kit 24496 + K&M® 24359 adapter Settings
High (4.5 – 35kHz) Adjustable, +/-3dB Power On/Power Of Settings High (4.5 – 35kHz) Adjustable, +/-3dB Power On/Power Of On/off switch on rear panel Standby consumption< 0.5W Displays and controlsLED for power on/off and standbyTransducers Woofer6.5′ (16,5cm) Flax ConeTweeter 1′ (25mm) ‘M’ profile Aluminum-MagnesiumCabinet Construction0.6′ (15mm) MDF FinishVinyl, real walnut and black paintingDimensions with four rubber feet (HxWxD) 14 x 8.6 x 11.2′ (355 x 218 x 285mm)Weight 28.2lb (8.5kg)On/off switch on rear panel
-
Focal Alpha 80 Evo (each)
₹75,575.00Original price was: ₹75,575.00.₹71,000.00Current price is: ₹71,000.00.Read moreACTIVE-2-WAY Flagship line Alpha 80 Evo is particularly recommended for professionals seeking high volumes and a rich sub-bass extension. This monitor has a 1” (25mm) aluminium inverted dome tweeter and a woofer with a Slatefiber cone, made in France by Focal. Its large laminar vent allows you to significantly limit noises and its dual amplification …
-
Focal Twin6 be (each)
₹202,850.00Original price was: ₹202,850.00.₹192,708.00Current price is: ₹192,708.00.Read morePerformance Frequency response 40Hz – 40kHz Maximum SPL 115dB SPL (peak @ 1m) Electronic section Inputs Type / Impedance Connector Sensitivity Electronically balanced / 10 kOhms XLR Adjustable, +4dBu or -10dBV Bass
Bass – Midrange
Treble150W rms, BASH® technology
150W rms, BASH® technology
100W rms, class ABPower supply Local supply Connection 230V (2A fuse)
115V (4A fuse)IEC inlet and detachable power cord User controls and indicators Input sensitivity selector
Midrange driver selector (right/left)
Adjustable tweeter and woofer levels by potentiometers
On/off switch, voltage selectorLight indicator Power On LED Transducers Woofer 2 x 6W4370B, 61/2′ (16.5cm) Focal “W” composite sandwich cone drivers High frequency TB871, Focal Beryllium inverted dome tweeter Shielding Integral through cancellation magnets / cans or by magnet design Cabinetwork Construction 71/2′ (19mm) MDF panels Finish Dark red natural veneering side panels, black body Dimensions (HxLxD) 913/16 x 1911/16 x 133/8′(250mm x 500mm x 340mm) Weight 30.8lb (14kg)

















Reviews
There are no reviews yet.