Product Showcase
Fluid Audio FC10S Powered Studio Subwoofer
Original price was: ₹41,987.00.₹39,887.00Current price is: ₹39,887.00.
- Type: 10″ active subwoofer
- LF Driver: 10-inch composite paper cone with high temperature voice coil and damped rubber surround
- Frequency Response: 20 Hz – 200 Hz
- Amplifier Power: 200 W
- S/N Ratio: > 100 dB typical, A-weighted
- Input Sensitivity: 85 mV pink noise input produces 100 dBA output SPL at one meter with volume control at maximum
- Power: Factory programmed for either 100-120V ~60Hz, 220-240V ~50Hz
- Protection: RF interference, output current limiting, over-temperature, turn on/off transient, subsonic filter, external main fuse
- Cabinet: Vinyl-laminated, high acoustic efficient MDF
- Weight: 28.2 lbs
Fluid Audio FC10S Subwoofer
The Fluid Audio FC10S Subwoofer is designed for any mid-to-large room requiring bass extension and the is the perfect solution for recording/mixing studios that would require solid and accurate bass reproduction
Threshold
Many types of music benefit from bass extension – from Hip-Hop to House, to Rock. Being able to hear your mix with bass extension is critical to accurately creating your music. The FC10S subwoofer allows you to hear every detail down to 20Hz, which gets below your hearing threshold, and down to where you actually “feel” it. Mix Engineers want the confidence to know that their mixes translate well on all types of systems. That is why we included a standby footswitch. With a click of the included foot pedal, you can turn the bass on or off, and audition your mix with bass extension and without.
FC10S EQ Settings
The FC10S also has two built-in EQ settings that allow for two different settings – depending on your music: A more conventional Flat response, as well as a “Punch” setting that is perfect for Dance or other mid-bass heavy music. For further flexibility, the FC10S has a variable phase adjustment to fine-tune the phase for optimal matching to your L/R monitors (0-180°), a variable low pass crossover filter control (50 -200) hertz, and an 80Hz high pass filter (used with foot switch) for satellite connections. We have also included a ground lift switch as well, to minimize ground hum with some home wiring.
Key Components of Fluid Audio FC10S
Driver Size:
10-Inch Woofer: The FC10S features a 10-inch long-throw woofer, designed to deliver deep and impactful bass frequencies. The size and design of the driver help ensure a wide and accurate bass response.
Amplification:
100 Watts RMS / 200 Watts Peak: The subwoofer is powered by a built-in Class D amplifier, providing a robust 100 watts of continuous power and 200 watts peak. This ensures sufficient power to drive the woofer and produce strong low-end performance.
Frequency Response:
30Hz to 150Hz: The FC10S offers a frequency response range from 30Hz to 150Hz, allowing it to cover the lower end of the audio spectrum effectively. This range helps in accurately reproducing low-frequency details in music and audio mixes.
Adjustable Crossover:
Variable Crossover Control: The subwoofer includes an adjustable crossover control, allowing you to set the cutoff frequency where the subwoofer’s output blends with your main monitors. This ensures a seamless integration with your existing studio monitors or speaker system.
Volume Control:
Variable Volume: It includes a volume control to adjust the output level of the subwoofer independently. This allows you to balance the subwoofer with your main speakers according to your preference and room acoustics.
Inputs and Outputs:
-
- Multiple Inputs: The FC10S offers both balanced XLR and unbalanced RCA inputs, providing flexibility for connecting to various audio sources and equipment.
- Outputs: It also includes outputs for connecting to other speakers or additional subwoofers, allowing for expanded setups if needed.
Fluid Audio FC10S Subwoofer Features
- 10-inch composite paper cone with high-temperature voice coil and damped rubber surround
- Active subwoofer
- Ground lift switch
- Bass-reflex vent port on front baffle for ease of placement
- Amplifier standby function to conserve energy
- XLR balanced and 1/4” balanced/unbalanced inputs and RCA inputs
- XLR balanced and 1/4” balanced/unbalanced outputs
- Variable lowpass filter control: 50Hz-200Hz
- Variable Phase control: 0 – 180°
- Switch for both “Flat” and “Punchy” settings
- 80 Hz highpass filter(with foot switch) for satellite connections
- The included footswitch allows you to turn FC10S on and off for auditioning with bass and without
Fluid Audio FC10S Subwoofer Specifications
- Frequency response: 20-200Hz
- Total amplifier power: 200 watts
- Signal-to-noise: > 100dB (typical A-weighted)
- Polarity: Positive signal at + input produces outward LF cone displacement
- Input impedance: 20k ohms balanced, 10k ohms unbalanced
You must be logged in to post a review.
Related products
-
Focal Trio6 Be (each)
Original price was: ₹422,199.00.₹411,644.00Current price is: ₹411,644.00.Read morePerformance Frequency response 3-way mode 35Hz – 40kHz (+/- 3dB) 2-way mode (Focus) 90Hz – 20kHz (+/- 3dB) Maximum SPL 3-way mode 115dB SPL (peak at 1m) 2-way mode (Focus) 105dB SPL (peak at 1m) Electronic section Inputs Type / Impedance Connector Sensitivity Electronically balanced / 10 kOhms XLR Adjustable, +4dBu or -10dBV Bass
Midrange
Treble200W, class G
150W, class G
100W, class ABPower supply Main voltage Wiring 230V (class T fuse 1.6A fuse rating) – 115V (class T fuse 3.5 A fuse rating) Detachable IEC power cable Indicators and controls Rear panel Input sensitivity selector (+4dBu/-10dBV)
Low frequency shelving (+/- 3dB from 35 to 250Hz)
High frequency shelving (+/- 3dB from 4.5 to 40kHz)
EQ low-mid frequencies (+/- 3dB at 160Hz, Q factor = 1)
FOCUS input / FOCUS outputLED Focus mode on, audio clipping and protection indicated by LED on front panel Transducers Subwoofer 8W64701 8′ Focal driver with W composite sandwich cone Woofer 5W04701 5′ Focal driver with W composite sandwich cone Tweeter TB872, 1′ Focal pure Beryllium inverted dome tweeter Cabinet Structure 22mm (0.86′) reinforced panels Finish Dark Red natural Burr-ash veneering side panels, Black body Dimensions including 4 rubber feet (HxWxD) 201/2′ x 1015/16′ x 143/16′ (520 x 278 x 360mm) Weight 44 lbs (20 kg) -
Dynaudio BM15A (Pair)
Original price was: ₹476,600.00.₹429,000.00Current price is: ₹429,000.00.Add to cart- Active nearfield monitor with 10″ woofer and 1.1″ silk dome tweeter
- Frequency response 40Hz – 22kHz (+/- 3 dB)
- Maximum SPL at 1 meter, pair (IEC Long Term) – 124 dB RMS
- Maximum SPL at 2 meters, 5.1 (IEC Long Term) – 125.5 dB RMS
- Amplifier power – Tweeter: 100 W / Woofer: 200 W
- Bass reflex cabinet with radius edges on front baffle
- Esotec tweeter with soft dome, rear chamber, magnetic fluid cooled
- One-piece molded polypropylene cone woofer with 4″ pure aluminum wire voice coil
Handcrafted aluminum drivers - 124dB SPL peak power output
- HF & LF analog trim filters
-
Focal Shape 40 (each)
Original price was: ₹65,080.00.₹61,826.00Current price is: ₹61,826.00.Read moreThe compact functionality Shape 40 is the most compact studio monitor in the Focal Professional line, and the perfect solution for nearfield monitoring. These monitors can be used from 23″ away (60cm), and they have astonishingly extended low end frequency response. Whether you have a room of less than 107ft2 (10m2), or an installation where …
-
Focal Trio11 Be (each)
Original price was: ₹562,575.00.₹524,946.00Current price is: ₹524,946.00.Read morePerformance Frequency response 3-way mode 30Hz – 40kHz (+/- 3dB) 2-way mode (Focus) 90Hz – 20kHz (+/- 3dB) Maximum SPL 3-way mode 118dB (peak @ 1m) 2-way mode (Focus) 105dB (peak @ 1m) Electronics Inputs Type/Impedance Connectors
SensitivityElectronically balanced / 10KOhms
XLR
Adaptable, +4 dBu or -10 dBvBass
Midrange
Treble300W, class G
150W, class G
100W, class ABPower supply Local supply
Wiring230V (1.6A T fuse) – 115V (3.5A T fuse)
Connection Detachable IEC inlet power cordindicators and controls Rear panel Input sensitivity selector (+4dBu/-10dBV)
Low frequency shelving (+/- 3dB from 35 to 250Hz)
High frequency shelving (+/- 3dB from 4.5 to 40kHz)
Low-mid EQ frequencies (+/- 3dB to 160Hz, Q factor = 1)
FOCUS input / FOCUS outputAuto standby Auto standby switch on the back of the loudspeaker: enable / disable switch LED Focus power on, clipping and default LED on front panel Transducers Subwoofer 10W96701D
Focal 913/16′ (25cm) speaker driver with ‘W’ composite sandwich coneMédium 5W04701
Focal 51/8′ (13cm) speaker driver with ‘W’ composite sandwich coneTweeter TB872
Focal 1′ pure Beryllium inverted dome tweeterCabinet Construction 13/16 and 13/16′ (21mm and 30mm) panels with internal braces Finish Natural veneering side panels Dark red burr ash, black body Dimensions with four rubber feet (HxDxW) 25′ x 139/16′ x 173/4′ (635 x 345 x 450mm) Weight 82.2lbs (37.3kg)
Reviews
There are no reviews yet.