Product Showcase
Fluid Audio FC10S Powered Studio Subwoofer
Original price was: ₹41,987.00.₹39,887.00Current price is: ₹39,887.00.
- Type: 10″ active subwoofer
- LF Driver: 10-inch composite paper cone with high temperature voice coil and damped rubber surround
- Frequency Response: 20 Hz – 200 Hz
- Amplifier Power: 200 W
- S/N Ratio: > 100 dB typical, A-weighted
- Input Sensitivity: 85 mV pink noise input produces 100 dBA output SPL at one meter with volume control at maximum
- Power: Factory programmed for either 100-120V ~60Hz, 220-240V ~50Hz
- Protection: RF interference, output current limiting, over-temperature, turn on/off transient, subsonic filter, external main fuse
- Cabinet: Vinyl-laminated, high acoustic efficient MDF
- Weight: 28.2 lbs
Fluid Audio FC10S Subwoofer
The Fluid Audio FC10S Subwoofer is designed for any mid-to-large room requiring bass extension and the is the perfect solution for recording/mixing studios that would require solid and accurate bass reproduction
Threshold
Many types of music benefit from bass extension – from Hip-Hop to House, to Rock. Being able to hear your mix with bass extension is critical to accurately creating your music. The FC10S subwoofer allows you to hear every detail down to 20Hz, which gets below your hearing threshold, and down to where you actually “feel” it. Mix Engineers want the confidence to know that their mixes translate well on all types of systems. That is why we included a standby footswitch. With a click of the included foot pedal, you can turn the bass on or off, and audition your mix with bass extension and without.
FC10S EQ Settings
The FC10S also has two built-in EQ settings that allow for two different settings – depending on your music: A more conventional Flat response, as well as a “Punch” setting that is perfect for Dance or other mid-bass heavy music. For further flexibility, the FC10S has a variable phase adjustment to fine-tune the phase for optimal matching to your L/R monitors (0-180°), a variable low pass crossover filter control (50 -200) hertz, and an 80Hz high pass filter (used with foot switch) for satellite connections. We have also included a ground lift switch as well, to minimize ground hum with some home wiring.
Key Components of Fluid Audio FC10S
Driver Size:
10-Inch Woofer: The FC10S features a 10-inch long-throw woofer, designed to deliver deep and impactful bass frequencies. The size and design of the driver help ensure a wide and accurate bass response.
Amplification:
100 Watts RMS / 200 Watts Peak: The subwoofer is powered by a built-in Class D amplifier, providing a robust 100 watts of continuous power and 200 watts peak. This ensures sufficient power to drive the woofer and produce strong low-end performance.
Frequency Response:
30Hz to 150Hz: The FC10S offers a frequency response range from 30Hz to 150Hz, allowing it to cover the lower end of the audio spectrum effectively. This range helps in accurately reproducing low-frequency details in music and audio mixes.
Adjustable Crossover:
Variable Crossover Control: The subwoofer includes an adjustable crossover control, allowing you to set the cutoff frequency where the subwoofer’s output blends with your main monitors. This ensures a seamless integration with your existing studio monitors or speaker system.
Volume Control:
Variable Volume: It includes a volume control to adjust the output level of the subwoofer independently. This allows you to balance the subwoofer with your main speakers according to your preference and room acoustics.
Inputs and Outputs:
-
- Multiple Inputs: The FC10S offers both balanced XLR and unbalanced RCA inputs, providing flexibility for connecting to various audio sources and equipment.
- Outputs: It also includes outputs for connecting to other speakers or additional subwoofers, allowing for expanded setups if needed.
Fluid Audio FC10S Subwoofer Features
- 10-inch composite paper cone with high-temperature voice coil and damped rubber surround
- Active subwoofer
- Ground lift switch
- Bass-reflex vent port on front baffle for ease of placement
- Amplifier standby function to conserve energy
- XLR balanced and 1/4” balanced/unbalanced inputs and RCA inputs
- XLR balanced and 1/4” balanced/unbalanced outputs
- Variable lowpass filter control: 50Hz-200Hz
- Variable Phase control: 0 – 180°
- Switch for both “Flat” and “Punchy” settings
- 80 Hz highpass filter(with foot switch) for satellite connections
- The included footswitch allows you to turn FC10S on and off for auditioning with bass and without
Fluid Audio FC10S Subwoofer Specifications
- Frequency response: 20-200Hz
- Total amplifier power: 200 watts
- Signal-to-noise: > 100dB (typical A-weighted)
- Polarity: Positive signal at + input produces outward LF cone displacement
- Input impedance: 20k ohms balanced, 10k ohms unbalanced
You must be logged in to post a review.
Related products
-
Kali Audio IN-5 (Pair)
Original price was: ₹99,500.00.₹89,990.00Current price is: ₹89,990.00.Add to cartFeatures:
- 5-inch powered studio monitor with coaxial 1-inch textile-dome tweeter and 4-inch optimized-profile midrange driver
- Tri-amped design with integrated Class D power amp
- Ruler-flat frequency response — there’s nothing hyped about this speaker
- Exhibits negligible levels of distortion — a full 6dB lower than its nearest competitor
- Boasts 20dB of headroom while playing continuously at 85dB
- Large magnets and voice coils produce super-accurate low-end response and impressive low-frequency extension
- Coaxial design exhibits superb directivity — better than any non-coaxial design —covering your entire room uniformly
- Low-noise port tube yields clean, punchy bass with zero chuffing
- Boundary EQ allows you to tailor the speaker to any environment
- LF/HF trims for fine-tuning the speaker’s response
- Balanced XLR and TRS inputs, and an unbalanced RCA input
-
Focal Shape 40 (each)
Original price was: ₹65,080.00.₹61,826.00Current price is: ₹61,826.00.Read moreThe compact functionality Shape 40 is the most compact studio monitor in the Focal Professional line, and the perfect solution for nearfield monitoring. These monitors can be used from 23″ away (60cm), and they have astonishingly extended low end frequency response. Whether you have a room of less than 107ft2 (10m2), or an installation where …
-
Focal Solo6 Be (each)
Original price was: ₹165,068.00.₹160,000.00Current price is: ₹160,000.00.Read morePerformance Frequency response 40Hz – 40kHz Maximum SPL 113dB SPL (peak @ 1m) Electronic section Inputs Type / Impedance Connector Sensitivity Electronically balanced / 10 kOhms XLR Adjustable, +4dBu or -10dBV Bass – Midrange Treble 150W rms, BASH® technology 100W rms, class AB Power supply Local supply Connection 230V (1.6A fuse rating)115V (3.5A fuse rating)IEC inlet and detachable power cord IEC inlet and detachable power cord User controls and indicators Input sensitivity selection switch Adjustable tweeter and woofer levels by potentiometers On/off switch, voltage selector Light indicator Power On LED Transducers Woofer 6W4370B, 61/2′ (16.5cm) Focal “W” composite sandwich cone drivers High frequency TB871, Focal Beryllium inverted dome tweeter Shielding Integral through cancellation magnets / cans or by magnet design Cabinetwork Construction 71/2′ (19mm) MDF panels Finish Dark red natural veneering side panels, black body Dimensions (HxLxD) 13 x 97/16 x 117/16′(330mm x 240mm x 290mm) Weight 24.2lb (11kg) -
Focal Shape 65 (each)
Original price was: ₹123,065.00.₹116,000.00Current price is: ₹116,000.00.Read moreSystem SHAPE 65 Frequency response (+/-3dB) 40Hz – 35kHz Maximum SPL (musical signal) 109dB SPL (peak @ 1m) Electronic section Inputs/ Impedance Type XLR: balanced 10kOhms Connectors RCA: unbalanced 10kOhms with sensitivity compensation Midrange and low frequency amplifier 80W, class AB High frequency amplifier 25W, class AB Automatic standby Standby on After approximately 30 minutes with no signal Standby off Signal detection > 3 mV Electrical supply Voltages 220-240V (T1AL / 250V fuse) or 100-120V (T2AL / 250V fuse) Connection IEC plug and detachable power cord Settings High pass filter Adjustable Full range 45/60/90Hz Bass(0 – 250Hz) Adjustable, +/-6dB Midrange/bass(160Hz, Q=1) Adjustable, +/-3dB SHAPE 65 Wall mount K&M® Fixing kit 24471 + K&M® 24357 adapter Ceiling mount K&M® Fixing kit 24496 + K&M® 24359 adapter Settings
High (4.5 – 35kHz) Adjustable, +/-3dB Power On/Power Of Settings High (4.5 – 35kHz) Adjustable, +/-3dB Power On/Power Of On/off switch on rear panel Standby consumption< 0.5W Displays and controlsLED for power on/off and standbyTransducers Woofer6.5′ (16,5cm) Flax ConeTweeter 1′ (25mm) ‘M’ profile Aluminum-MagnesiumCabinet Construction0.6′ (15mm) MDF FinishVinyl, real walnut and black paintingDimensions with four rubber feet (HxWxD) 14 x 8.6 x 11.2′ (355 x 218 x 285mm)Weight 28.2lb (8.5kg)On/off switch on rear panel
Reviews
There are no reviews yet.