Category
- ACCESSORIES
- AUDIO INTERFACES
- BOSS
- brass and wood winds
- DJ CONTROLLERS
- DRUMS & PERCUSSION
- EFFECTS PROCESSOR
- GUITAR
- KEYBOARDS
- OTHER
- PIANO
- SPEAKER
- STOCK CLEARANCE SALE
- STUDIO/ RECORDING
- VIOLINS

Dynaudio Core Sub
₹600,990.00 Original price was: ₹600,990.00.₹540,990.00Current price is: ₹540,990.00.
- Unique 4 x 9″ studio subwoofer delivers deep yet ultra-precise low frequencies
- MSP+ (Magnesium Silicate Polymer) Hybrid Drive speakers feature lightweight aluminum construction for extremely low distortion
- Extremely accurate all the way down to 13.5Hz, well below the threshold of human hearing
- Highly efficient 1000W amplifier provides massive headroom
- Analog and AES3 digital inputs let you keep your signal digital right to the end
- 24-bit sampling rate and 192kHz resolution; dependent on input signal
- Core DSP optimizes imaging, balance, and bass extension
- All drivers handcrafted by Dynaudio in Denmark
Core Sub is the ideal low-frequency extension for all speakers in the Core studio monitor range.
And when we say ‘low’, we mean it: it digs down with a flat response to 15Hz with a 6dB roll-off at 13.5Hz. There’s no meaningful low frequency that it won’t reproduce utterly faithfully.
Combine its handcrafted cabinet – made at our factory in Denmark – with four of our latest low-frequency drive units and 1000W of Pascal class-D amplification, and you get a subwoofer worthy of supporting the ground-breaking Core speakers.
Power? You’ve got it…
Core Sub uses the same DSP engine found in all the Core speakers, which means you can customise its response based on where it’s placed in the room. Its analogue and AES digital inputs let you calibrate it to work in any configuration from single-channel extension through 2.1-channel bass management and on to a theatrical LFE channel with the headroom to really nail it. Put your Cores in HP and you’re ready to go.
By using the same electronic platform as the rest of the Core products, we can ensure that the Sub’s behaviour and tonality are identical to the monitors – which means you get a totally integrated system, not a separate product just for bass.
It’s physically integrated, too. The design makes it possible to stack more units and combine it with other Core products. You can even use the VESA mount if you want to get it up on the wall. And it’s mix-and-match. For example: add two Subs per side with a Core 47 in between, regulate the dB and all is aligned – both physically and sonically. (Although we can’t promise your gold discs will stay in the same place on the wall.)
Finesse? That too…
Each Sub delivers 120dB, integrating perfectly with the power on offer from the rest of the Core series. It’s versatile, too – it’s digital and analogue, you can stack up to three together and on the top there are indentations to perfectly align any core monitors.
Core Sub has four 9in side-firing handmade Dynaudio hybrid woofers – Dynaudio’s new MSP+ Hybrid Drive units – which are made primarily from aluminium for stiffness, and are designed specifically for subwoofers. To counter ringing from the aluminium, it utilises a dual-action damping system that combines paper dampening on the back of the driver and Dynaudio’s own Magnesium Silicate Polymer material in a dampening cap on the front, ensuring the best performance. This driver is an improved version of the one you find in the highly acclaimed 18s woofer. The quest was simple; make the best bass driver possible.
Make no mistake: Core Sub isn’t just another boom-box. This is a highly accurate low-frequency delivery system.
Get ready to be moved. Literally.
Tech Specs
- Powered: Yes
- Speaker Size: 9″
- Driver Type: Magnesium Silicate Polymer
- Total Power : 1000W
- Maximum Peak SPL: 120 dB SPL @ 1m
- Input Types: 1 x XLR, 1 x XLR (AES/EBU)
- Output Types: 1 x XLR
- USB: 1 x Type B
- Enclosure Type: Sealed
- Enclosure Material: MDF Double Front Baffle
- Height: 20.25″
- Width: 15.3″
- Depth: 14.3″
- Weight: 105.8 lbs.
You must be logged in to post a review.
Related products
-
Focal SUB 12 ST6 (Each)
₹401,800.00Original price was: ₹401,800.00.₹380,000.00Current price is: ₹380,000.00.Read moreKey points
• Composite sandwich ‘W’-cone: sound neutrality, no distortion
• Large laminar port: no port noises or distortion
• Automatic disengageable stand-by mode
• Amplification: 600W RMS, 1000W peak
• Carry handle
-
Kali Audio WS-12 V2 Subwoofer
₹111,900.00Original price was: ₹111,900.00.₹99,900.00Current price is: ₹99,900.00.Add to cartFeatures:
- 1,000W, 12″ powered subwoofer
- 23Hz–160Hz frequency response faithfully reproduces your mix’s low-frequency content
- 123dB max SPL — loud enough for 5.1 arrays and light PA use (5.1 systems require an external processor and crossover)
- Built-in limiter circuit protects against unsafe voltage levels
- Small size fits easily under your desk and in most small passenger cars
- Mega-durable 18mm plywood enclosure and roadworthy side handles
- Low-noise port tube yields clean, punchy bass with zero chuffing
- Selectable crossovers every 20Hz between 40Hz and 140Hz for use in a myriad of applications
- Presets for Kali’s LP-6, LP-8, and IN-8 studio monitors, plus LFE and external crossover settings
- 4 preset gain adjustment settings compensate for the sub’s positioning
- Polarity reverse function resolves a common sonic problem
- RCA inputs accommodate consumer-grade devices
- Power-saving standby mode
- Rear-panel jack enables you to use a 3rd-party footswitch to bypass the subwoofer
-
Focal Sub6 (each)
₹175,605.00Original price was: ₹175,605.00.₹166,824.00Current price is: ₹166,824.00.Read morePerformance Frequency response 30Hz – 250Hz Maximum SPL 116dB SPL (peak @ 1m) Electronic section Inputs Type / Impedance Connector Sensitivity Right, left, LFE
Electronically balanced / 10 kOhmsXLR 3 points socket Adjustable Outputs (towards satellites) Type/Impedance
ConnectorRight, left
Electronically balanced / 50 Ohms
XLR 3 points plugAmplification 350W rms, BASH ® technology Signal internal treatment and functions Subwoofer section Mono right/left summation
LFE + mono low-pass
24dB / octave
Phase adjustment
Polarity selection switch
Switch high-pass filter, cut-off frequency selectionControl Adjustable subwoofer level
Low-pass cut-off frequency setting
Phase adjustment
Polarity adjustment
Subwoofer switch (mute)
2.1 “Bypass” (external remote control)
High-pass frequency selection
Releasable high-passVisualization (LED) Power On Subwoofer switch(mute) Released high-pass Power supply Local supply Connection 230V (1.6A fuse) or 115V (3.15A fuse) Removable CEI supply wire Transducers Subwoofer 11W7670, 105/8′ (27cm) Focal “W” composite sandwich cone driver Cabinetwork Construction 71/2′ (19mm) MDF panels Finish Dark red natural veneering side panels, black body Dimensions (HxLxD) 1415/16 x 139/16 x 175/16′ (380mm x 344mm x 440mm) Weight 50.7lb (23kg) -
PreSonus Eris Sub8
₹28,800.00Original price was: ₹28,800.00.₹25,990.00Current price is: ₹25,990.00.Add to cartFeatures:
● 8-inch, front-firing, paper-composite low-frequency transducer with high-elastisity rubber surround
● Class AB amplifier: 100W peak (50W RMS) power
● Input gain control (-30 dB to +6 dB, continuously variable)
● Continuously variable lowpass filter (50 Hz to 130 Hz)
● Defeatable highpass filter removes frequency content below 80 Hz from the full-range signal sent from the Eris Sub8 outputs to the main speakers
● Left and right, balanced ¼-inch TRS and unbalanced RCA main inputs
● Left and right balanced ¼-inch TRS and unbalanced RCA pass-through outputs for connecting satellite speakers
● Polarity invert switch
● Protection: RF interference, Output-current limiting, Over-temperature, Turn-on/off transient, Subsonic filter, External mains fuse

















Reviews
There are no reviews yet.