BOSS RE-2 Space Echo
₹31,120.00
Input/Output Specifications:
- Nominal Input Level: -20 dBu (standard line-level input).
- Maximum Input Level: +7 dBu (maximum acceptable signal level before distortion or clipping).
- Input Impedance: 1 M ohm (high impedance, suitable for instruments like guitars or basses).
- Nominal Output Level: -20 dBu (standard output level).
- Maximum Output Level: +7 dBu (maximum acceptable output before clipping).
- Output Impedance: 1 k ohm (standard for line-level outputs).
- Recommended Load Impedance: 10 k ohms or greater (for proper signal transfer and compatibility).
Bypass:
- Buffered Bypass: Ensures that the signal is preserved and not degraded when the pedal is turned off, allowing for better tone integrity.
Controls:
- MODE Knob: Switch between different delay modes or effect types, potentially offering a variety of delay sounds (e.g., analog, digital, etc.).
- REPEAT RATE Knob: Adjusts the speed or rate of the delay repetitions, affecting how fast the echo repeats occur.
- WOW & FLUTTER Knob: Likely adds a modulation effect to the delay, simulating the pitch variation found in analog tape delays.
- INTENSITY Knob: Controls the depth or strength of the delay effect, impacting how pronounced the echo is.
- TONE Knob: Adjusts the tonal quality of the delayed sound, potentially controlling high or low-frequency emphasis.
- ECHO Knob: Likely adjusts the level of the delay effect in the overall mix, balancing it with the dry signal.
- REVERB Knob: Adds reverb to the signal, further enhancing the spatial effect of the sound.
- CARRYOVER Switch: Likely controls whether the delay continues to sound after the pedal is bypassed, useful for creating smooth transitions in live performance.
Indicator:
- CHECK Indicator: Lights up when the battery is low or when the pedal is in need of maintenance, ensuring you don’t run out of power unexpectedly.
Connectors:
- INPUT A (MONO) and INPUT B Jack: 1/4-inch phone type jacks for connecting your instrument or audio source.
- OUTPUT A (MONO) and OUTPUT B Jack: 1/4-inch phone type jacks for sending the processed signal to an amplifier or additional effects.
- CTL/EXP Jack: 1/4-inch TRS (Tip-Ring-Sleeve) jack for connecting a footswitch or expression pedal (sold separately), allowing for additional control over the effects in real-time.
- DC IN Jack: For connecting an external AC power adapter (PSA series, sold separately).
Power Supply:
- Battery: Alkaline 9V battery (6LR61).
- AC Adaptor: PSA series (sold separately).
- Current Draw: 75 mA (moderate current consumption).
- Expected Battery Life: Approx. 4.5 hours of continuous use with an alkaline battery (actual life may vary depending on usage conditions).
Accessories:
- Included: Leaflet with safety and usage information, 9V alkaline battery (6LR61).
- Optional: AC Adapter (PSA series), Footswitch (FS-5U), Dual Footswitch (FS-6, FS-7), Expression Pedal (FV-500H, FV-500L, EV-30, Roland EV-5).
Size and Weight:
- Width: 73 mm (2-7/8 inches).
- Depth: 129 mm (5-1/8 inches).
- Height: 59 mm (2-3/8 inches).
- Weight (with battery): 450 g (1 lb).
The Authentic Space Echo Experience in a Compact Pedal
Introduced in 1974 and produced for over 14 years, the Roland RE-201 Space Echo stands among the most legendary and sought-after effect units in music history. Known for its distinctive rhythmic echo sounds, warm character, and highly playable sonic quirks, this tape-based classic continues to inspire musicians, producers, and audio mixers over four decades on.
With the RE-2, the authentic sound and behavior of the Space Echo is now available in the famous BOSS compact series for the first time. Backed by intensive R&D and our latest innovations, the RE-2 delivers the coveted magic of the RE-201 in a pedalboard-friendly footprint—realized in flawless detail by the company that designed the original.
Features
- Authentic sound and behavior of the legendary Roland RE-201 Space Echo in a BOSS compact pedal
- Classic multi-head tape echo sound with expanded delay time
- Original three-head configuration and 11 different sound combinations
- Vintage RE-201 spring reverb sound with modern stereo operation
- Wow & Flutter control for introducing varying levels of natural tape modulation
- Twist effect with footswitch control
- Select between the unprocessed analog dry signal or the modeled sound of the original Space Echo preamp
- Tap tempo and carryover functions
- True stereo input and output
- Expandable control via external footswitches or an expression pedal
- BOSS five-year warranty
You must be logged in to post a review.
Related products
-
BOSS Bass Multiple Effects ME-90B
₹42,934.00Add to cartAudio Specifications:
- Sampling Frequency: 48 kHz
- AD Conversion: 24 bits + AF method
AF method (Adaptive Focus method) is a proprietary method from Roland & BOSS that vastly improves the signal-to-noise (SN) ratio of the AD converters. - DA Conversion: 32 bits
- Processing: 32-bit floating point
- Effects: 93 Types
- Memories: 36 (User) + 36 (Preset)
- Phrase Loop: 38 sec. (MONO)
- Internal Tuning Detection Accuracy: ±0.1 cent
Input/Output:
- Nominal Input Level:
- INPUT: -10 dBu
- RETURN: -10 dBu
- Maximum Input Level:
- INPUT: +7 dBu
- RETURN: +7 dBu
- Input Impedance:
- INPUT: 1 M ohm
- RETURN: 1 M ohm
- Nominal Output Level:
- OUTPUT L/MONO, R: -10 dBu
- PHONES: -10 dBu
- SEND: -10 dBu
- BALANCED OUTPUT: -10 dBu
- Output Impedance:
- OUTPUT L/MONO, R: 1 k ohm
- PHONES: 44 ohms
- SEND: 1 k ohm
- BALANCED OUTPUT: 600 ohms
- Recommended Load Impedance:
- OUTPUT L/MONO, R: 10 k ohms or greater
- PHONES: 44 ohms or greater
- SEND: 10 k ohms or greater
- BALANCED OUTPUT: 600 ohms or greater
Controls and Display:
- Buttons:
- BANK▼/AMP/EQ switch, BANK▲/MOD switch, CTL/BLEND switch
- MEMORY/MANUAL switch, 1/COMP switch, 2/FILTER switch
- 3/DRV/SYN switch, 4/DLY/REV switch, PEDAL FX switch
- GND LIFT switch, AMP/LINE switch, POWER switch
- EXIT button, WRITE button, CTL button, EDIT button
- Knobs:
- PREAMP TYPE knob, BASS knob, MIDDLE knob, TREBLE knob, GAIN knob, LEVEL knob
- MOD TYPE knob, TYPE knob, RATE/TIME knob, DEPTH/DUTY/FB knob, E.LEV/RESO knob, BLEND knob
- COMP/FX1 TYPE knob, SUSTAIN/LOW/-1OCT knob, ATTACK/HIGH/-2OCT knob, LEVEL/DIRECT knob
- FILTER/FX2 TYPE knob, SENS/RATE/KEY knob, TONE/DEPTH/HRM knob, PEAK/LEVEL/RESO knob
- DRIVE/SYNTH TYPE knob, DRIVE knob, TONE knob, LEVEL knob
- DLY/REV TYPE knob, TIME knob, FEEDBACK/TONE knob, E.LEVEL knob, OUTPUT LEVEL knob, PEDAL FX TYPE knob
- Pedal:
- PEDAL FX pedal
- Display:
- 7 segments, 2 characters (LED)
- Tuning guides (LED)
Connectors:
- Input/Output Connectors:
- INPUT jack, OUTPUT (L/MONO, R) jacks, SEND jack, RETURN jack: 1/4-inch phone type
- BALANCED OUTPUT jack: XLR type
- PHONES jack: Stereo miniature phone type
- Control and Expansion:
- USB COMPUTER port: USB Type-C®
- Bluetooth® ADAPTOR connector: Dedicated connector
- DC IN jack
Power and Size:
- Power Supply:
- Alkaline battery (AA, LR6) x 4 or AC adaptor
- Current Draw: 195 mA
- Expected Battery Life Under Continuous Use:
- Alkaline battery: Approximately 6 hours
This can vary depending on the specifications of the batteries, capacity of the batteries, and the conditions of use.
- Alkaline battery: Approximately 6 hours
- Size:
- Width: 443 mm (17-1/2 inches)
- Depth: 220 mm (8-11/16 inches)
- Height: 67 mm (2-11/16 inches)
- Maximum Height: 93 mm (3-11/16 inches)
- Weight: 2.9 kg (6 lb 7 oz)
Accessories and Options (Sold Separately):
- Included Accessories:
- STARTUP GUIDE
- Alkaline battery (AA, LR6) x 4
- Leaflet “USING THE UNIT SAFELY”
- Options:
- AC adaptor: PSA-S series
- Bluetooth® Audio MIDI Dual Adaptor: BT-DUAL
- Carry Bag: CB-ME80, CB-BU10
-
Boss RC-5 Loop Station Pedal
₹25,838.00Add to cartStandard Features
- Advanced BOSS looping features in a compact footprint
- Class-leading sound quality with 32-bit AD/DA and 32-bit floating-point processing
- Stereo looper engine with 13 hours of recording time
- LCD with multi-color backlight for viewing loop status and editing parameters
- Reverse function for infusing loops with interesting textures
- Seven different drum kits and 57 preset rhythms with A/B variations
- Support for expanded control via external footswitches, an expression pedal, or MIDI
- Full MIDI I/O provided with space-saving mini TRS jacks (BMIDI-5-35 adaptor cable available separately)
- Onboard storage for 99 phrase memories
- Back up and load WAV loops via USB
-
Boss KATANA-MINI Guitar Amplifier
₹11,954.00Original price was: ₹11,954.00.₹10,100.00Current price is: ₹10,100.00.Add to cartSPECIFICATIONType Solid State Number of Channels 1 Total Power 7W Speaker Size 1 x 4″ speaker Effects Delay EQ 3-band EQ Inputs 1 x 1/4″ (instrument), 1 x 1/8″ (aux in) Outputs 1 x 1/8″ (headphones/rec out) Headphones Yes Power Source 9V DC 350mA power supply (sold separately) / 6 x AA batteries Height 7.12″ Width 9.06″ Depth 4.6″ Weight 2.6 lbs. -
BOSS DD-8 DIGITAL DELAY EFFECTS PEDAL
₹17,761.00Original price was: ₹17,761.00.₹16,000.00Current price is: ₹16,000.00.Add to cartSPECIFICATIONEffect Types: Transpose, Flanger, Phaser, Pan, Tremolo, Slicer, Bend, Chorus, Robot, Female, Male, Gt->Bass, Filter, Delay, Lo-Fi, Distortion
Rhythm Types: 83
USB Interface
- Hi-Speed USB (USB Mass Storage Class)
- Hi-Speed USB (USB-AUDIO)
Displays
- 7 segments, 2 characters (LED)
- 16 characters, 2 lines (backlit LCD)
Nominal Input Level
- INPUT MIC: -50 dBu (variable)
- INPUT INST: -10 dBu (variable)
- INPUT AUX: -20 dBu (variable)
Input Impedance
- INPUT MIC: 4 k ohms
- INPUT INST: 1 M ohm
- INPUT AUX: 47 k ohms
Nominal Output Level
- MAIN OUTPUT: -10 dBu
- SUB OUTPUT: -10 dBu
Output Impedance: 2 k ohms
Recommended Load Impedance: 10 k ohms or greater
Pedals
- TRACK 1 REC/DUB/PLAY pedal
- TRACK 2 REC/DUB/PLAY pedal
- TRACK 3 REC/DUB/PLAY pedal
- TRACK 1 STOP pedal
- TRACK 2 STOP pedal
- TRACK 3 STOP pedal
- ALL START/STOP pedal
- LOOP FX pedal
- EXP 1 pedal
Sliders
- TRACK 1 slider
- TRACK 2 slider
- TRACK 3 slider
Knobs
- MASTER LEVEL knob
- RHYTHM LEVEL knob
- AUX knob
- INST knob
- MIC knob
Connectors
- INPUT MIC jack: XLR type (balanced/phantom power: DC 48 V, 10 mA)
- INPUT INST jacks (L/MONO, R): 1/4″ phone type
- INPUT AUX jack: Stereo miniature phone type
- MAIN OUTPUT jacks (L/MONO, R): 1/4″ phone type
- SUB OUTPUT jacks (L/MONO, R): 1/4″ phone type
- PHONES jack: Stereo 1/4″ phone type
- CTL 1,2 / EXP 2 jack: 1/4″ TRS phone type
- CTL 3,4 / EXP 3 jack: 1/4″ TRS phone type
- USB connector
- MIDI connectors (IN/OUT/THRU) (*)
- DC IN jack (DC 9 V)
- (*) MIDI synchronization is possible with other RC-300 devices or when RC-300 is set to master.
Power Supply: DC 9 V (AC adaptor)
Reviews
There are no reviews yet.