BOSS RE-2 Space Echo
₹31,120.00
Input/Output Specifications:
- Nominal Input Level: -20 dBu (standard line-level input).
- Maximum Input Level: +7 dBu (maximum acceptable signal level before distortion or clipping).
- Input Impedance: 1 M ohm (high impedance, suitable for instruments like guitars or basses).
- Nominal Output Level: -20 dBu (standard output level).
- Maximum Output Level: +7 dBu (maximum acceptable output before clipping).
- Output Impedance: 1 k ohm (standard for line-level outputs).
- Recommended Load Impedance: 10 k ohms or greater (for proper signal transfer and compatibility).
Bypass:
- Buffered Bypass: Ensures that the signal is preserved and not degraded when the pedal is turned off, allowing for better tone integrity.
Controls:
- MODE Knob: Switch between different delay modes or effect types, potentially offering a variety of delay sounds (e.g., analog, digital, etc.).
- REPEAT RATE Knob: Adjusts the speed or rate of the delay repetitions, affecting how fast the echo repeats occur.
- WOW & FLUTTER Knob: Likely adds a modulation effect to the delay, simulating the pitch variation found in analog tape delays.
- INTENSITY Knob: Controls the depth or strength of the delay effect, impacting how pronounced the echo is.
- TONE Knob: Adjusts the tonal quality of the delayed sound, potentially controlling high or low-frequency emphasis.
- ECHO Knob: Likely adjusts the level of the delay effect in the overall mix, balancing it with the dry signal.
- REVERB Knob: Adds reverb to the signal, further enhancing the spatial effect of the sound.
- CARRYOVER Switch: Likely controls whether the delay continues to sound after the pedal is bypassed, useful for creating smooth transitions in live performance.
Indicator:
- CHECK Indicator: Lights up when the battery is low or when the pedal is in need of maintenance, ensuring you don’t run out of power unexpectedly.
Connectors:
- INPUT A (MONO) and INPUT B Jack: 1/4-inch phone type jacks for connecting your instrument or audio source.
- OUTPUT A (MONO) and OUTPUT B Jack: 1/4-inch phone type jacks for sending the processed signal to an amplifier or additional effects.
- CTL/EXP Jack: 1/4-inch TRS (Tip-Ring-Sleeve) jack for connecting a footswitch or expression pedal (sold separately), allowing for additional control over the effects in real-time.
- DC IN Jack: For connecting an external AC power adapter (PSA series, sold separately).
Power Supply:
- Battery: Alkaline 9V battery (6LR61).
- AC Adaptor: PSA series (sold separately).
- Current Draw: 75 mA (moderate current consumption).
- Expected Battery Life: Approx. 4.5 hours of continuous use with an alkaline battery (actual life may vary depending on usage conditions).
Accessories:
- Included: Leaflet with safety and usage information, 9V alkaline battery (6LR61).
- Optional: AC Adapter (PSA series), Footswitch (FS-5U), Dual Footswitch (FS-6, FS-7), Expression Pedal (FV-500H, FV-500L, EV-30, Roland EV-5).
Size and Weight:
- Width: 73 mm (2-7/8 inches).
- Depth: 129 mm (5-1/8 inches).
- Height: 59 mm (2-3/8 inches).
- Weight (with battery): 450 g (1 lb).
The Authentic Space Echo Experience in a Compact Pedal
Introduced in 1974 and produced for over 14 years, the Roland RE-201 Space Echo stands among the most legendary and sought-after effect units in music history. Known for its distinctive rhythmic echo sounds, warm character, and highly playable sonic quirks, this tape-based classic continues to inspire musicians, producers, and audio mixers over four decades on.
With the RE-2, the authentic sound and behavior of the Space Echo is now available in the famous BOSS compact series for the first time. Backed by intensive R&D and our latest innovations, the RE-2 delivers the coveted magic of the RE-201 in a pedalboard-friendly footprint—realized in flawless detail by the company that designed the original.
Features
- Authentic sound and behavior of the legendary Roland RE-201 Space Echo in a BOSS compact pedal
- Classic multi-head tape echo sound with expanded delay time
- Original three-head configuration and 11 different sound combinations
- Vintage RE-201 spring reverb sound with modern stereo operation
- Wow & Flutter control for introducing varying levels of natural tape modulation
- Twist effect with footswitch control
- Select between the unprocessed analog dry signal or the modeled sound of the original Space Echo preamp
- Tap tempo and carryover functions
- True stereo input and output
- Expandable control via external footswitches or an expression pedal
- BOSS five-year warranty
You must be logged in to post a review.
Related products
-
Boss GX-100 Guitar Effects Processor
₹71,513.00Original price was: ₹71,513.00.₹64,361.00Current price is: ₹64,361.00.Add to cartStandard Features
- Powerful, easy-to-use amp/effects processor for guitar and bass
- Exceptional audio quality with 24-bit AD and 32-bit DA conversion, 32-bit floating-point processing, and 48 kHz sampling rate
- Authentic tube amplifier tone and touch response with AIRD technology
- 23 amplifier types and over 150 BOSS effects
- Ultra-flexible amp/effect routing with 15 assignable blocks
- Wide selection of onboard speaker types and support for loading WAV speaker IRs
- Streamlined modern design with intuitive color touch display and rugged metal chassis
- Unlimited effects control with freely assignable onboard footswitches and expression pedal with toe switch
- Connect up to two footswitches or an expression pedal for expanded control
- Send/return loop for external pedals or four-cable method
- Control jack for remote channel switching on your amplifier
- MIDI I/O jacks and multi-channel computer recording via USB
- Edit sounds from your computer with BOSS Tone Studio for macOS and Windows
- Download and share Livesets at BOSS Tone Exchange
- Optional Bluetooth® Audio MIDI Dual Adaptor allows you to edit sounds and stream audio from an iOS or Android mobile device
-
BOSS KATANA-50 MKII EX Guitar Amplifier
₹39,800.00Add to cartSpecifications:
- Rated Power Output: 50 W
- Nominal Input Level:
- INPUT: -10 dBu (1 M ohm)
- AUX IN: -10 dBu (20 k ohms)
- Speaker: 30 cm (12 inches) x 1
Controls:
- Power Controls:
- POWER switch
- MASTER knob
- POWER CONTROL switch (STANDBY, 0.5 W, 25 W, 50 W)
- Amplifier Controls:
- VARIATION button
- AMP TYPE switch (ACOUSTIC, CLEAN, CRUNCH, LEAD, BROWN)
- GAIN knob
- VOLUME knob
- Equalizer Controls:
- BASS knob
- MIDDLE knob
- TREBLE knob
- Multi Effect Controls:
- BOOSTER button
- MOD button
- FX button
- DELAY button
- REVERB button
- TAP button
- BOOSTER knob
- MOD knob
- FX knob
- DELAY knob
- REVERB knob
- Tone Setting Controls:
- CH1 button
- CH2 button
- PANEL button
Indicators:
- VARIATION
- BOOSTER
- MOD
- FX
- DELAY
- REVERB
- TAP
- CH1
- CH2
- PANEL
Connectors:
- Input/Output Connectors:
- INPUT jack: 1/4-inch phone type
- POWER AMP IN jack: 1/4-inch phone type
- LINE OUT jack: 1/4-inch phone type
- REC OUT/PHONES jack: Stereo 1/4-inch phone type
- EXP PEDAL/CTL CH1/CH2 jack: 1/4-inch TRS phone type
- GA-FC/CTL SOLO jack: 1/4-inch TRS phone type
- AUX IN jack: Stereo miniature phone type
- USB port: USB B type
- AC IN jack
Power:
- Power Consumption: 47 W
Accessories:
- Included:
- Owner’s Manual
- Power cord
- GA-FC sticker
- Options (Sold Separately):
- Footswitch: FS-5L, FS-6, FS-7
- Expression pedal: Roland EV-5, BOSS EV-30, FV-500L, FV-500H
- Foot Controller: GA-FC, GA-FC EX
- Amplifier Stand: BAS-1
- Amplifier Cover: BAC-KTN50
Size and Weight (Including handle and rubber feet):
- Dimensions:
- Width: 470 mm (18-9/16 inches)
- Depth: 238 mm (9-3/8 inches)
- Height: 398 mm (15-11/16 inches)
- Weight: 11.7 kg (25 lbs 13 oz)
-
BOSS Guitar Effects Processor GT-1000
₹131,409.00Original price was: ₹131,409.00.₹118,300.00Current price is: ₹118,300.00.Add to cartAudio Specifications:
- Sampling Frequency: 96 kHz
- AD Conversion: 32 bits + AF method
AF method (Adaptive Focus method) is a proprietary method from Roland & BOSS that vastly improves the signal-to-noise (SN) ratio of the AD and DA converters. - DA Conversion: 32 bits
- Effects: 185 types
- Patches: 250 (User) + 250 (Preset)
- Phrase Loop:
- 38 sec. (MONO)
- 19 sec. (STEREO)
- Tuner Internal Detection: +/- 0.1 cent
Input/Output:
- Nominal Input Level:
- INPUT: -10 dBu
- RETURN1: -10 dBu
- RETURN2: -10 dBu
- Maximum Input Level:
- INPUT: +18 dBu
- RETURN1: +8 dBu
- RETURN2: +8 dBu
- Input Impedance:
- INPUT: 1 M ohm
- RETURN1: 1 M ohm
- RETURN2: 1 M ohm
- Nominal Output Level:
- MAIN OUTPUT (L/MONO, R): -10 dBu
- SUB OUTPUT (L, R): +4 dBu
- PHONES: -10 dBu
- SEND1: -10 dBu
- SEND2: -10 dBu
- Output Impedance:
- MAIN OUTPUT (L/MONO, R): 1 k ohm
- SUB OUTPUT (L, R): 600 ohms
- PHONES: 20 ohms
- SEND1: 1 k ohm
- SEND2: 1 k ohm
- Recommended Load Impedance:
- MAIN OUTPUT (L/MONO, R): 10 k ohms or greater
- SUB OUTPUT (L, R): 600 ohms or greater
- PHONES: 44 ohms or greater
- SEND1: 10 k ohms or greater
- SEND2: 10 k ohms or greater
Controls and Display:
- Buttons:
- DOWN switch, UP switch
- CTL1–3 switches, 1–5 switches, POWER switch
- EFFECT button, MENU button, EXIT button, WRITE button, PAGE button
- Knobs:
- 1–6 knobs, OUTPUT LEVEL knob
- Expression Pedal: Supported (see options)
- Display:
- Graphic LCD (512 x 160 dots, backlit LCD)
Connectors:
- Input/Output Connectors:
- INPUT jack, MAIN OUTPUT (L/MONO, R) jacks, SEND1 jack, RETURN1 jack, SEND2 jack, RETURN2 jack: 1/4-inch phone type
- SUB OUTPUT (L, R) connectors: XLR type
- PHONES jack: Stereo 1/4-inch phone type
- Control and Expansion:
- CTL4, 5/EXP2 jack, CTL6, 7/EXP3 jack, AMP CTL1, 2 jack: 1/4-inch TRS phone type
- USB Port: USB B type (for computer connection)
- Power Input: DC IN jack
- MIDI: IN, OUT connectors
Power and Size:
- Power Supply: AC adaptor (PSB-1U + AC Cord Set)
- Current Draw: 1.2 A
- Power Consumption in OFF Mode: 0.0 W
- Size:
- Width: 462 mm (18-3/16 inches)
- Depth: 248 mm (9-13/16 inches)
- Height: 70 mm (2-13/16 inches)
- Maximum height: 95 mm (3-3/4 inches)
- Weight: 3.6 kg (7 lbs 15 oz)
Accessories and Options (Sold Separately):
- Footswitches: FS-5U, FS-5L, FS-6, FS-7
- Expression Pedals: EV-30, FV-500L, FV-500H, Roland EV-5
- AC Adaptor: PSB-1U
Additional Notes:
- AC Adaptor Region Compatibility:
- When purchasing an AC adaptor, be sure to specify the adaptor (from the list that follows) that is designed for the region in which it will be used, and the voltage supplied there.
PSB-120/PSB-120TW/PSB-230EU/PSB-230UK/PSB-240A
- When purchasing an AC adaptor, be sure to specify the adaptor (from the list that follows) that is designed for the region in which it will be used, and the voltage supplied there.
-
BOSS Bass Multiple Effects ME-90B
₹42,934.00Add to cartAudio Specifications:
- Sampling Frequency: 48 kHz
- AD Conversion: 24 bits + AF method
AF method (Adaptive Focus method) is a proprietary method from Roland & BOSS that vastly improves the signal-to-noise (SN) ratio of the AD converters. - DA Conversion: 32 bits
- Processing: 32-bit floating point
- Effects: 93 Types
- Memories: 36 (User) + 36 (Preset)
- Phrase Loop: 38 sec. (MONO)
- Internal Tuning Detection Accuracy: ±0.1 cent
Input/Output:
- Nominal Input Level:
- INPUT: -10 dBu
- RETURN: -10 dBu
- Maximum Input Level:
- INPUT: +7 dBu
- RETURN: +7 dBu
- Input Impedance:
- INPUT: 1 M ohm
- RETURN: 1 M ohm
- Nominal Output Level:
- OUTPUT L/MONO, R: -10 dBu
- PHONES: -10 dBu
- SEND: -10 dBu
- BALANCED OUTPUT: -10 dBu
- Output Impedance:
- OUTPUT L/MONO, R: 1 k ohm
- PHONES: 44 ohms
- SEND: 1 k ohm
- BALANCED OUTPUT: 600 ohms
- Recommended Load Impedance:
- OUTPUT L/MONO, R: 10 k ohms or greater
- PHONES: 44 ohms or greater
- SEND: 10 k ohms or greater
- BALANCED OUTPUT: 600 ohms or greater
Controls and Display:
- Buttons:
- BANK▼/AMP/EQ switch, BANK▲/MOD switch, CTL/BLEND switch
- MEMORY/MANUAL switch, 1/COMP switch, 2/FILTER switch
- 3/DRV/SYN switch, 4/DLY/REV switch, PEDAL FX switch
- GND LIFT switch, AMP/LINE switch, POWER switch
- EXIT button, WRITE button, CTL button, EDIT button
- Knobs:
- PREAMP TYPE knob, BASS knob, MIDDLE knob, TREBLE knob, GAIN knob, LEVEL knob
- MOD TYPE knob, TYPE knob, RATE/TIME knob, DEPTH/DUTY/FB knob, E.LEV/RESO knob, BLEND knob
- COMP/FX1 TYPE knob, SUSTAIN/LOW/-1OCT knob, ATTACK/HIGH/-2OCT knob, LEVEL/DIRECT knob
- FILTER/FX2 TYPE knob, SENS/RATE/KEY knob, TONE/DEPTH/HRM knob, PEAK/LEVEL/RESO knob
- DRIVE/SYNTH TYPE knob, DRIVE knob, TONE knob, LEVEL knob
- DLY/REV TYPE knob, TIME knob, FEEDBACK/TONE knob, E.LEVEL knob, OUTPUT LEVEL knob, PEDAL FX TYPE knob
- Pedal:
- PEDAL FX pedal
- Display:
- 7 segments, 2 characters (LED)
- Tuning guides (LED)
Connectors:
- Input/Output Connectors:
- INPUT jack, OUTPUT (L/MONO, R) jacks, SEND jack, RETURN jack: 1/4-inch phone type
- BALANCED OUTPUT jack: XLR type
- PHONES jack: Stereo miniature phone type
- Control and Expansion:
- USB COMPUTER port: USB Type-C®
- Bluetooth® ADAPTOR connector: Dedicated connector
- DC IN jack
Power and Size:
- Power Supply:
- Alkaline battery (AA, LR6) x 4 or AC adaptor
- Current Draw: 195 mA
- Expected Battery Life Under Continuous Use:
- Alkaline battery: Approximately 6 hours
This can vary depending on the specifications of the batteries, capacity of the batteries, and the conditions of use.
- Alkaline battery: Approximately 6 hours
- Size:
- Width: 443 mm (17-1/2 inches)
- Depth: 220 mm (8-11/16 inches)
- Height: 67 mm (2-11/16 inches)
- Maximum Height: 93 mm (3-11/16 inches)
- Weight: 2.9 kg (6 lb 7 oz)
Accessories and Options (Sold Separately):
- Included Accessories:
- STARTUP GUIDE
- Alkaline battery (AA, LR6) x 4
- Leaflet “USING THE UNIT SAFELY”
- Options:
- AC adaptor: PSA-S series
- Bluetooth® Audio MIDI Dual Adaptor: BT-DUAL
- Carry Bag: CB-ME80, CB-BU10
Reviews
There are no reviews yet.