BOSS LMB-3 Bass Limiter/Enhancer
₹11,655.00
Tuning and Signal Features:
- Nominal Input Level: -20 dBu, which is typical for guitar-level input.
- Input Impedance: 1 M ohm, suitable for high-impedance instruments like electric guitars and basses.
- Nominal Output Level: -20 dBu.
- Output Impedance: 1 k ohm, which is standard for pedals to be connected to amplifiers or other audio gear.
- Recommended Load Impedance: 10 k ohms or greater, ensuring compatibility with most amplifiers and other equipment.
Bypass:
- Buffered Bypass: Ensures that the signal remains intact when the pedal is turned off, preserving sound quality.
Controls:
- THSHD Knob: Likely controls the threshold of the compressor, setting the level at which compression begins to take effect.
- RATIO Knob: Adjusts the compression ratio, controlling how much compression is applied once the threshold is surpassed.
- ENHANCE Knob: This could adjust the tonal character or presence of the signal, often used to add brightness or “shine.”
- LEVEL Knob: Sets the output level of the compressed signal, allowing for volume adjustments after compression is applied.
- Pedal Switch: Used to engage or bypass the effect.
Power Supply:
- Battery Options:
- Carbon-zinc 9V battery (6F22).
- Alkaline 9V battery (6LR61).
- AC Adaptor: PSA series (sold separately).
- Current Draw:
- 25 mA, which is relatively low, meaning the pedal consumes little power.
- Expected Battery Life:
- Carbon-zinc: Approx. 5 hours of continuous use.
- Alkaline: Approx. 10.5 hours of continuous use.
Indicators:
- CHECK Indicator: Shows when the battery is low or needs to be replaced. It can also be used to verify the pedal’s status.
Connectors:
- INPUT Jack: 1/4-inch phone type for connecting instruments or line-level sources.
- OUTPUT Jack: 1/4-inch phone type for sending the processed signal to an amplifier or next device.
- DC IN Jack: For connecting an external power source (AC Adaptor, PSA series).
Accessories:
- Included: Leaflet with safety and usage instructions, 9V Carbon-zinc battery (6F22).
- Optional: AC Adaptor (PSA series, sold separately).
Size and Weight:
- Width: 73 mm (2-7/8 inches).
- Depth: 129 mm (5-1/8 inches).
- Height: 59 mm (2-3/8 inches).
- Weight (including battery): 380 g (14 oz).
Smooth Tone, Every Time
The LMB-3 affords complete control over a bass guitar’s dynamic range using a limiter effect and an enhancer circuit designed specifically for electric bass.
- Full control of bass guitar’s dynamic range via threshold level and ratio knobs
- Enhancer provides increased bass clarity and presence
- AC adaptor or 9V battery operation
- BOSS five-year warranty
Be the first to review “BOSS LMB-3 Bass Limiter/Enhancer” Cancel reply
You must be logged in to post a review.
Categories: BOSS, Single Units
Related products
-
BOSS KATANA-Artist MKII Guitar Amplifier
₹74,505.00Add to cartSpecifications:
- Rated Power Output:
- 100 W
- Nominal Input Level:
- INPUT: -10 dBu (1 M ohm)
- AUX IN: -10 dBu (20 k ohms)
- RETURN IN: -10 dBu (100 k ohm)
- Speaker:
- 30 cm (12 inches) x 1
Controls:
- Power Controls:
- POWER switch
- MASTER knob
- PRESENCE knob
- SOLO knob
- GLOBAL EQ button
- CONTOUR switch (OFF, 1, 2, 3)
- POWER CONTROL switch (STANDBY, 0.5 W, 50 W, 100 W)
- CABINET RESONANCE switch (VINTAGE, MODERN, DEEP)
- Amplifier Controls:
- AMP TYPE knob (ACOUSTIC, CLEAN, CRUNCH, LEAD, BROWN)
- VARIATION button
- GAIN knob
- VOLUME knob
- Equalizer Controls:
- BASS knob
- MIDDLE knob
- TREBLE knob
- Multi Effect Controls:
- BOOSTER button
- MOD button
- FX button
- DELAY button
- REVERB button
- TAP button
- BOOSTER knob
- MOD knob
- FX knob
- DELAY knob
- REVERB knob
- Tone Setting Controls:
- BANK button
- CH1 button
- CH2 button
- CH3 button
- CH4 button
- PANEL button
- Expand Controls:
- EXPAND switch (OFF, STEREO, DUAL LINK)
Indicators:
- ACOUSTIC
- CLEAN
- CRUNCH
- LEAD
- BROWN
- VARIATION
- BOOSTER
- MOD
- FX
- DELAY
- REVERB
- TAP
- BANK
- CH1
- CH2
- CH3
- CH4
- PANEL
- GLOBAL EQ
Connectors:
- Input/Output Connectors:
- INPUT jack: 1/4-inch phone type
- POWER AMP IN/DUAL LINK jack: 1/4-inch phone type
- LINE OUT jack: 1/4-inch phone type
- SEND jack: 1/4-inch phone type
- RETURN jack: 1/4-inch phone type
- SPEAKER OUT 16 ohms A jack: 1/4-inch phone type
- SPEAKER OUT 16 ohms B jack: 1/4-inch phone type
- SPEAKER OUT 8 ohms jack: 1/4-inch phone type
- REC OUT/PHONES jack: Stereo 1/4-inch phone type
- EXP PEDAL/CTL CH1/CH2 jack: 1/4-inch TRS phone type
- GA-FC/CTL SOLO jack: 1/4-inch TRS phone type
- AUX IN jack: Stereo miniature phone type
- USB port: USB B type
- MIDI IN connector
- AC IN jack
Power:
- Power Consumption: 77 W
Accessories:
- Included:
- Owner’s Manual
- Power cord
- GA-FC sticker
- Options (Sold Separately):
- Footswitch: BOSS FS-5L, BOSS FS-6, BOSS FS-7
- Expression pedal: Roland EV-5, BOSS EV-30, BOSS FV-500L, BOSS FV-500H
- GA FOOT CONTROLLER (GA-FC, GA-FC EX)
- Amplifier Stand: BAS-1
Size and Weight:
- Dimensions:
- Width: 630 mm (24-13/16 inches)
- Depth: 248 mm (9-13/16 inches)
- Height: 515 mm (20-5/16 inches)
- Weight: 19 kg (41 lbs 15 oz)
- Rated Power Output:
-
BOSS Guitar Effects Processor GT-1000
₹131,409.00Original price was: ₹131,409.00.₹118,300.00Current price is: ₹118,300.00.Add to cartAudio Specifications:
- Sampling Frequency: 96 kHz
- AD Conversion: 32 bits + AF method
AF method (Adaptive Focus method) is a proprietary method from Roland & BOSS that vastly improves the signal-to-noise (SN) ratio of the AD and DA converters. - DA Conversion: 32 bits
- Effects: 185 types
- Patches: 250 (User) + 250 (Preset)
- Phrase Loop:
- 38 sec. (MONO)
- 19 sec. (STEREO)
- Tuner Internal Detection: +/- 0.1 cent
Input/Output:
- Nominal Input Level:
- INPUT: -10 dBu
- RETURN1: -10 dBu
- RETURN2: -10 dBu
- Maximum Input Level:
- INPUT: +18 dBu
- RETURN1: +8 dBu
- RETURN2: +8 dBu
- Input Impedance:
- INPUT: 1 M ohm
- RETURN1: 1 M ohm
- RETURN2: 1 M ohm
- Nominal Output Level:
- MAIN OUTPUT (L/MONO, R): -10 dBu
- SUB OUTPUT (L, R): +4 dBu
- PHONES: -10 dBu
- SEND1: -10 dBu
- SEND2: -10 dBu
- Output Impedance:
- MAIN OUTPUT (L/MONO, R): 1 k ohm
- SUB OUTPUT (L, R): 600 ohms
- PHONES: 20 ohms
- SEND1: 1 k ohm
- SEND2: 1 k ohm
- Recommended Load Impedance:
- MAIN OUTPUT (L/MONO, R): 10 k ohms or greater
- SUB OUTPUT (L, R): 600 ohms or greater
- PHONES: 44 ohms or greater
- SEND1: 10 k ohms or greater
- SEND2: 10 k ohms or greater
Controls and Display:
- Buttons:
- DOWN switch, UP switch
- CTL1–3 switches, 1–5 switches, POWER switch
- EFFECT button, MENU button, EXIT button, WRITE button, PAGE button
- Knobs:
- 1–6 knobs, OUTPUT LEVEL knob
- Expression Pedal: Supported (see options)
- Display:
- Graphic LCD (512 x 160 dots, backlit LCD)
Connectors:
- Input/Output Connectors:
- INPUT jack, MAIN OUTPUT (L/MONO, R) jacks, SEND1 jack, RETURN1 jack, SEND2 jack, RETURN2 jack: 1/4-inch phone type
- SUB OUTPUT (L, R) connectors: XLR type
- PHONES jack: Stereo 1/4-inch phone type
- Control and Expansion:
- CTL4, 5/EXP2 jack, CTL6, 7/EXP3 jack, AMP CTL1, 2 jack: 1/4-inch TRS phone type
- USB Port: USB B type (for computer connection)
- Power Input: DC IN jack
- MIDI: IN, OUT connectors
Power and Size:
- Power Supply: AC adaptor (PSB-1U + AC Cord Set)
- Current Draw: 1.2 A
- Power Consumption in OFF Mode: 0.0 W
- Size:
- Width: 462 mm (18-3/16 inches)
- Depth: 248 mm (9-13/16 inches)
- Height: 70 mm (2-13/16 inches)
- Maximum height: 95 mm (3-3/4 inches)
- Weight: 3.6 kg (7 lbs 15 oz)
Accessories and Options (Sold Separately):
- Footswitches: FS-5U, FS-5L, FS-6, FS-7
- Expression Pedals: EV-30, FV-500L, FV-500H, Roland EV-5
- AC Adaptor: PSB-1U
Additional Notes:
- AC Adaptor Region Compatibility:
- When purchasing an AC adaptor, be sure to specify the adaptor (from the list that follows) that is designed for the region in which it will be used, and the voltage supplied there.
PSB-120/PSB-120TW/PSB-230EU/PSB-230UK/PSB-240A
- When purchasing an AC adaptor, be sure to specify the adaptor (from the list that follows) that is designed for the region in which it will be used, and the voltage supplied there.
-
BOSS Audio RC-300 Loop Station
₹76,963.00Original price was: ₹76,963.00.₹57,000.00Current price is: ₹57,000.00.Add to cart- Three stereo tracks with dedicated footswitches and controls for each
- Dedicated fader per track
- Expression pedal for effects control in real time
- Up to three hours of internal recording and 99 onboard memories
- 16 onboard effects optimized for looping
- XLR Microphone input with phantom power
- USB storage; import/export WAV files
-
BOSS DD-8 DIGITAL DELAY EFFECTS PEDAL
₹17,761.00Original price was: ₹17,761.00.₹16,000.00Current price is: ₹16,000.00.Add to cartSPECIFICATIONEffect Types: Transpose, Flanger, Phaser, Pan, Tremolo, Slicer, Bend, Chorus, Robot, Female, Male, Gt->Bass, Filter, Delay, Lo-Fi, Distortion
Rhythm Types: 83
USB Interface
- Hi-Speed USB (USB Mass Storage Class)
- Hi-Speed USB (USB-AUDIO)
Displays
- 7 segments, 2 characters (LED)
- 16 characters, 2 lines (backlit LCD)
Nominal Input Level
- INPUT MIC: -50 dBu (variable)
- INPUT INST: -10 dBu (variable)
- INPUT AUX: -20 dBu (variable)
Input Impedance
- INPUT MIC: 4 k ohms
- INPUT INST: 1 M ohm
- INPUT AUX: 47 k ohms
Nominal Output Level
- MAIN OUTPUT: -10 dBu
- SUB OUTPUT: -10 dBu
Output Impedance: 2 k ohms
Recommended Load Impedance: 10 k ohms or greater
Pedals
- TRACK 1 REC/DUB/PLAY pedal
- TRACK 2 REC/DUB/PLAY pedal
- TRACK 3 REC/DUB/PLAY pedal
- TRACK 1 STOP pedal
- TRACK 2 STOP pedal
- TRACK 3 STOP pedal
- ALL START/STOP pedal
- LOOP FX pedal
- EXP 1 pedal
Sliders
- TRACK 1 slider
- TRACK 2 slider
- TRACK 3 slider
Knobs
- MASTER LEVEL knob
- RHYTHM LEVEL knob
- AUX knob
- INST knob
- MIC knob
Connectors
- INPUT MIC jack: XLR type (balanced/phantom power: DC 48 V, 10 mA)
- INPUT INST jacks (L/MONO, R): 1/4″ phone type
- INPUT AUX jack: Stereo miniature phone type
- MAIN OUTPUT jacks (L/MONO, R): 1/4″ phone type
- SUB OUTPUT jacks (L/MONO, R): 1/4″ phone type
- PHONES jack: Stereo 1/4″ phone type
- CTL 1,2 / EXP 2 jack: 1/4″ TRS phone type
- CTL 3,4 / EXP 3 jack: 1/4″ TRS phone type
- USB connector
- MIDI connectors (IN/OUT/THRU) (*)
- DC IN jack (DC 9 V)
- (*) MIDI synchronization is possible with other RC-300 devices or when RC-300 is set to master.
Power Supply: DC 9 V (AC adaptor)
Reviews
There are no reviews yet.