Category
- ACCESSORIES
- AUDIO INTERFACES
- BOSS
- brass and wood winds
- DJ CONTROLLERS
- DRUMS & PERCUSSION
- EFFECTS PROCESSOR
- GUITAR
- KEYBOARDS
- OTHER
- PIANO
- SPEAKER
- STOCK CLEARANCE SALE
- STUDIO/ RECORDING
- VIOLINS

BOSS DM-101 Delay Machine
₹68,258.00 Original price was: ₹68,258.00.₹61,500.00Current price is: ₹61,500.00.
General Specs
|
Feature |
Specification |
|---|---|
|
Sampling Frequency |
96 kHz |
|
AD/DA Conversion |
32‑bit |
|
Processing |
32‑bit floating point |
|
Delay Modes |
12 modes: Classic, Vintage, Modern, Multi‑Head, Non‑Linear, Ambience, Reflect (Stereo), Doubling+Delay (Stereo), Wide (Stereo), Dual Mod (Stereo), Pan (Stereo), Pattern (Stereo) |
|
Max Delay Time |
Up to 1200 ms (mode-dependent) |
|
Phrase Loop |
60 s @ 96 kHz mono / 48 kHz stereo; 120 s @ 48 kHz mono |
Memory & Control
|
Feature |
Specification |
|---|---|
|
Memory |
127 user presets + Manual mode |
|
Footswitches |
On/Off, Memory, Tap Tempo |
|
Knobs |
Mode, Delay Time, Intensity, Delay Volume, Mod Rate, Mod Depth, Variation |
|
Tap Division |
Yes, with dedicated button |
Input / Output
|
Parameter |
INPUT A/MONO, B & OUTPUT A/MONO, B (1/4” phone) |
|---|---|
|
Nominal Level |
–10 dBu |
|
Maximum Level |
+7 dBu |
|
Input Impedance |
1 MΩ |
|
Output Impedance |
1 kΩ |
|
Recommended Load |
≥ 10 kΩ |
Bypass
-
Buffered bypass (relay-based true bypass possible)
Connectivity
|
Connector |
Type |
|---|---|
|
CTL 1, CTL 2 / EXP |
1/4″ TRS phone jack |
|
MIDI IN / OUT |
1/8″ TRS mini (MIDI via TRS) |
|
USB |
Micro-B (for firmware updates) |
|
DC IN |
Accepts PSA-series AC adapter |
Power & Dimensions
|
Feature |
Specification |
|---|---|
|
Current Draw |
260 mA @ 9 V DC |
|
Power Supply |
Included PSA adapter |
|
Dimensions (WxDxH) |
192 × 133 × 52 mm (7‑9/16″ × 5‑15/64″ × 2‑3/64″) |
|
Height (with foot) |
53 mm (2‑3/32″) |
|
Weight |
830 g / 1 lb 14 oz |
Accessories
-
Included: AC adapter, Owner’s Manual, Rubber feet
-
Options: FS-5U, FS-6, FS-7 footswitches; FV‑500H/L, EV‑5 expression pedal; MIDI/TRS cables
Meet the Ultimate Analog Delay
Classic sound meets modern power with the DM-101 Delay Machine, the ultimate analog delay. Driven by eight BBDs under smart CPU control, this inspiring pedal delivers 12 unique modes, stereo operation, and a wide array of tonal colors, all while maintaining 100 percent analog signal processing throughout. And with 127 user memories, tap tempo, carryover, MIDI, and more, the DM-101 brings you the features and versatility of an advanced digital pedal—but with the vibrant, characterful sound that’s only possible with authentic analog BBD circuitry.
Standard Features
- The ultimate analog delay pedal realized with advanced BOSS technology
- Fully analog BBD audio circuitry shaped by precision digital CPU control
- Warm, saturated, and highly musical tone
- Twelve modes deliver a wide range of mono and stereo delay textures, created using up to eight internal BBDs
- Stereo output with flexible signal routing options
- Adjustable modulation rate and depth with dedicated knobs
- Variation knob for controlling multiple parameters that are unique to each mode
- Selectable carryover for maintaining delay trails when the effect is bypassed
- MIDI I/O on mini TRS connectors
- Tap tempo function and tap division switch for creating rhythmic delays
- Four onboard memories plus the current panel settings
- 127 user memories accessible via MIDI program change
Analog Delay for the 21st Century
Analog delays based around BBD (bucket-brigade device) microchips emerged in the 1970s as a compact and cost-effective alternative to the standard tape delays of the era. Their warm, saturated, and highly musical sound established a distinctive style of delay that remains favored by many musicians and audio engineers. Leveraging modern CPU control, the DM-101 supercharges this classic effect with enhanced capabilities for today’s music makers.
DM-101 Delay Modes
Classic—Traditional warm analog delay sound extended with up to 1200 ms of delay time. Adjust the modulation behavior by cycling through triangle, sine, and more complex waveform shapes with the Variation knob.
Vintage—Retro analog delay sound inspired by the iconic BOSS DM-2 Delay pedal introduced in 1981. Adjust the modulation behavior by cycling through triangle, sine, and more complex waveform shapes with the Variation knob.
Modern—Uniquely clear analog delay sound with a distinctive high-end tone and up to 840 ms of delay time. Adjust the modulation behavior by cycling through triangle, sine, and more complex waveform shapes with the Variation knob.
Multi-Head—Emulates a multi-head tape delay while imparting a uniquely analog BBD sound character. Use the Variation knob to cycle through 10 different head combinations.
Non-Linear—A unique effect that produces consecutive short delays (35–190 ms) that gradually increase in volume. The Variation knob allows you to control the delay times after the initial delay.
Ambience—Simulates a small space. Change the size and early reflections with the Variation knob.
Reflect—A stereo delay sound that produces a reverb-style effect. Adjust the pre-delay with the Variation knob.
Doubling+Delay—A stereo effect that combines a doubled sound with a longer delay. Use the Variation knob to balance the two sounds across the stereo output.
Wide—A stereo delay with offset left/right delay times for an expansive sound. Use the Variation knob to adjust the delay offset amount.
Dual Mod—A stereo delay with different modulation phase settings on the left and right outputs. Use the Variation knob to adjust the phase amount (the phase is fully inverted at the maximum setting).
Pan—A tapped stereo delay with different delay times distributed across the sound field. Use the Variation knob to fine-tune the delay time amounts.
Pattern—Stereo delay with different rhythmic patterns. Use the Variation knob to choose from the 10 available pattern types.
You must be logged in to post a review.
Related products
-
Ultimate Support PRO-R-T-F
₹8,000.00Original price was: ₹8,000.00.₹7,200.00Current price is: ₹7,200.00.Add to cartSpecs:
- Part Name: Pro-R-T-F
- Part Number: 17956
- Tube Material: Steel
- Tube Finish: Powder Coated
- Tube Diameter: .87″ (22 mm)
- Base Type: Tripod
- Base Diameter: 26″ (660 mm)
- Height Type: Standard
- Shaft Height: 37.5″ – 65″ (953 mm x 1651 mm)
- Weight: 7.55 lbs (3.4 kg)
- Boom Type: Fixed
- Boom Length: 31.75″ (806 mm)
-
Stay Slim Stand 1100/02 – Black
₹13,999.00Original price was: ₹13,999.00.₹13,299.00Current price is: ₹13,299.00.Add to cart-
Application:Support for Keyboards / Peripherals
-
Accompany:02 Base Straight Slim + 02 Pair of Arms / Stringer 380mm + 03 Feet + 01 wire clip + Transport Bag
-
Maximum height:1100mm
-
Capacity:Supports keyboards with up to 61 keys
-
Maximum Weight Capacity:20kg (Do not exceed 10.0kg per pair of arms)
-
Material:Aluminum
-
Finishing:Special painting
-
Colors:Black, Silver, Red, Blue and White
-
Weight:2.9Kg
-
-
PrimAcoustic VoxGuard VU
₹12,405.00Original price was: ₹12,405.00.₹9,000.00Current price is: ₹9,000.00.Add to cartThe VoxGuard is a nearfield vocal screen designed to reduce the ambiance around a microphone when recording. This allows the voice to be captured while eliminating the echo and reverb, allowing the engineer to reintroduce the desired effects during post production.The VoxGuard is unique in that it is larger than competitive products while being lighter. This makes it more stable on the mic stand and opens the door to a wide array of applications including shielding instruments from each other in the studio; as a desk top acoustic shield for pod casting and is able to be used with all types of mic stands.The VoxGuard attaches to a mic stand with the supplied threaded mic stand adaptor. An open slot allows the cable through the back side while allowing the microphone to be articulated for optimum positioning.Baffel Material SP-9010 ABS plastic shell, 3/16′ (4.5mm) thick Black with textured finish Absorber Material 1′ High-density open cell acoustic foam, 2.2 lb/per cu-ft, charcoal color Dimensions 18′ (wide) x 15′ (tall) x 7.5′ (deep) 457mm (wide) x 381mm (tall) x 190mm (deep) Order Number P300-0100-00 Mounting Hardware Threaded mic stand adapter and knurled ring inluded. -
SXFP-016 Gold Series TS Male to XLR Female Cable – 5 Meter
₹1,350.00Add to cartDescription 100 percent oxygen free copper, two core shielded cable, twin conductive PVC inner shields protect cable signal quality with 100 percent coverage Length 5 meters/ 16 feet, black color cable. Connectors with internal strain relief for rugged reliability Warranty: One year warranty against manufacturing defect. Color: Black Package Contents: 1 X Gold Series XLR …
SXFP-016 Gold Series TS Male to XLR Female Cable – 5 MeterRead More

















Reviews
There are no reviews yet.