BOSS BP-1W Booster/Preamp
₹20,727.00
Here is the information you provided, organized clearly without removing any words:
Specifications
- Nominal Input Level: -20 dBu
- Input Impedance: 1 M ohm
Output Section:
- Nominal Output Level: -20 dBu
- Output Impedance: 1 k ohm
- Recommended Load Impedance: 10 k ohms or greater
Bypass:
- Buffered bypass
Controls:
- Pedal switch
- Mode switch
- DIST. knob
- COLOR MIX H knob
- COLOR MIX L knob
- LEVEL knob
Indicator:
- CHECK indicator (Used for indication of check battery)
Connectors:
- INPUT jack: 1/4-inch phone type
- OUTPUT jack: 1/4-inch phone type
- DC IN jack
Power Supply:
- Battery Options:
- Alkaline battery (9V, 6LR61 or 6LF22)
- Carbon-zinc battery (9V, 6F22)
- AC Adaptor: PSA series (sold separately)
- Current Draw: 30 mA
- Expected battery life under continuous use:
- Alkaline: Approx. 24 hours
- Carbon: Approx. 8 hours
These figures will vary depending on the actual conditions of use.
Accessories:
- Leaflet “USING THE UNIT SAFELY”
- Alkaline battery (9V, 6LR61 or 6LF22)
- Option (sold separately): AC adaptor: PSA series
Size and Weight:
- Width: 73 mm (2-7/8 inches)
- Depth: 129 mm (5-1/8 inches)
- Height: 59 mm (2-3/8 inches)
- Weight (including battery): 440 g (1 lb)
Out of stock
Sonic Sweetener
The vintage BOSS CE-1 Chorus Ensemble and RE-201 Space Echo are legendary for their inspiring and influential effect sounds. But they’re also loved for their variable analog preamp circuitry, which instantly infuses any guitar tone with character, body, and richness. With the BP-1W, you can now access these two classic preamp tones in a premium Waza Craft pedal, along with a natural, clear voice that functions as a standard clean boost.
Features
- Waza Craft innovation for a premium analog tone experience
- Premium booster and preamp pedal with analog circuitry derived from legendary BOSS and Roland effects
- Versatile design with three selectable modes
- CE mode reproduces the bright, bell-like preamp sound of the BOSS CE-1 Chorus Ensemble
- RE mode reproduces the fat, warm preamp sound of the Roland RE-201 Space Echo
- NAT mode provides a natural clean boost with minimal sound coloration
- Gain knob controls the amount of saturation introduced into the signal
- Level knob for controlling the overall volume and driving the inputs of amps and other pedals
- Selectable standard or vintage input buffer with different tone and response characteristics
- Made in Japan
- BOSS five-year warranty
Magical Enhancement
For generations, savvy guitarists have relied on key pieces of analog gear to enhance their core tone. Though discontinued over 30 years ago, the CE-1 and RE-201 remain widely used by many players for their characterful preamps as much as their famous analog effect sounds. These “secret weapons“ make the sound richer, fuller, and more satisfying to play, even when their effect processing is bypassed. The BP-1W lets you integrate the magical tone-shaping properties of these legends into your own rig—without having to seek out rare and expensive vintage originals.
Versatile Analog Sound Shaping
The BP-1W is one of the most flexible boost pedals available, offering three unique operation modes in a single compact stomp. Along with CE and RE vintage modes, a third mode provides a pristine clean boost when you want to pump the volume without added color. The Gain knob allows you to dial in a range of saturation and drive tones unique to each mode, while the Level knob lets you balance the effect/bypass sound or push downstream pedal and amp inputs for further tonal enhancement.
Choose Your Tone Color
CE—This mode reproduces the CE-1 preamp tone, known for its bright, bell-like character and tight low-end response. Tweak the Gain knob to conjure an array of pleasing tones, from mild to aggressive.
RE—This mode reproduces the unique color and response of the RE-201 preamp circuitry. It adds fatness and warmth even at the lowest Gain settings, with increasing saturation as the knob is turned up. You can achieve powerful driven sounds with rich analog compression characteristics, providing foundational vintage color to feed pedals and amps.
NAT—Produces a punchy, natural voice with minimal coloration. The modern analog Waza Craft circuitry provides a wide boost range, delivering top performance for any standard clean boost application.
Two Premium Buffers
The BP-1W features high-quality buffer circuitry with two selectable types. Slide the rear panel switch to choose between the pure signal of a standard buffer or a vintage buffer with lower input impedance. The vintage type produces a warmer tone and a smooth dynamic response, with maximum benefits achieved by connecting a guitar with passive pickups directly to the BP-1W’s input. The standard buffer is always engaged for signal conditioning when the pedal is bypassed, regardless of the buffer switch setting.
Waza Craft: The Art of Superior Tone
Since the beginning, the engineers at BOSS have been committed to achieving the finest guitar tones using any technology necessary, from old-school analog circuits to high-tech DSP. This enthusiastic spirit continues with the Waza Craft series, bringing you exceptional tone and touch response through carefully selected analog components, refined circuitry, and meticulous attention to detail. In Japan, “Waza“ is the term for art and technique, and these special edition pedals proudly carry the Waza symbol to represent the pinnacle of BOSS design and craftsmanship.
You must be logged in to post a review.
Related products
-
BOSS Bass Multiple Effects ME-90B
₹42,934.00Add to cartAudio Specifications:
- Sampling Frequency: 48 kHz
- AD Conversion: 24 bits + AF method
AF method (Adaptive Focus method) is a proprietary method from Roland & BOSS that vastly improves the signal-to-noise (SN) ratio of the AD converters. - DA Conversion: 32 bits
- Processing: 32-bit floating point
- Effects: 93 Types
- Memories: 36 (User) + 36 (Preset)
- Phrase Loop: 38 sec. (MONO)
- Internal Tuning Detection Accuracy: ±0.1 cent
Input/Output:
- Nominal Input Level:
- INPUT: -10 dBu
- RETURN: -10 dBu
- Maximum Input Level:
- INPUT: +7 dBu
- RETURN: +7 dBu
- Input Impedance:
- INPUT: 1 M ohm
- RETURN: 1 M ohm
- Nominal Output Level:
- OUTPUT L/MONO, R: -10 dBu
- PHONES: -10 dBu
- SEND: -10 dBu
- BALANCED OUTPUT: -10 dBu
- Output Impedance:
- OUTPUT L/MONO, R: 1 k ohm
- PHONES: 44 ohms
- SEND: 1 k ohm
- BALANCED OUTPUT: 600 ohms
- Recommended Load Impedance:
- OUTPUT L/MONO, R: 10 k ohms or greater
- PHONES: 44 ohms or greater
- SEND: 10 k ohms or greater
- BALANCED OUTPUT: 600 ohms or greater
Controls and Display:
- Buttons:
- BANK▼/AMP/EQ switch, BANK▲/MOD switch, CTL/BLEND switch
- MEMORY/MANUAL switch, 1/COMP switch, 2/FILTER switch
- 3/DRV/SYN switch, 4/DLY/REV switch, PEDAL FX switch
- GND LIFT switch, AMP/LINE switch, POWER switch
- EXIT button, WRITE button, CTL button, EDIT button
- Knobs:
- PREAMP TYPE knob, BASS knob, MIDDLE knob, TREBLE knob, GAIN knob, LEVEL knob
- MOD TYPE knob, TYPE knob, RATE/TIME knob, DEPTH/DUTY/FB knob, E.LEV/RESO knob, BLEND knob
- COMP/FX1 TYPE knob, SUSTAIN/LOW/-1OCT knob, ATTACK/HIGH/-2OCT knob, LEVEL/DIRECT knob
- FILTER/FX2 TYPE knob, SENS/RATE/KEY knob, TONE/DEPTH/HRM knob, PEAK/LEVEL/RESO knob
- DRIVE/SYNTH TYPE knob, DRIVE knob, TONE knob, LEVEL knob
- DLY/REV TYPE knob, TIME knob, FEEDBACK/TONE knob, E.LEVEL knob, OUTPUT LEVEL knob, PEDAL FX TYPE knob
- Pedal:
- PEDAL FX pedal
- Display:
- 7 segments, 2 characters (LED)
- Tuning guides (LED)
Connectors:
- Input/Output Connectors:
- INPUT jack, OUTPUT (L/MONO, R) jacks, SEND jack, RETURN jack: 1/4-inch phone type
- BALANCED OUTPUT jack: XLR type
- PHONES jack: Stereo miniature phone type
- Control and Expansion:
- USB COMPUTER port: USB Type-C®
- Bluetooth® ADAPTOR connector: Dedicated connector
- DC IN jack
Power and Size:
- Power Supply:
- Alkaline battery (AA, LR6) x 4 or AC adaptor
- Current Draw: 195 mA
- Expected Battery Life Under Continuous Use:
- Alkaline battery: Approximately 6 hours
This can vary depending on the specifications of the batteries, capacity of the batteries, and the conditions of use.
- Alkaline battery: Approximately 6 hours
- Size:
- Width: 443 mm (17-1/2 inches)
- Depth: 220 mm (8-11/16 inches)
- Height: 67 mm (2-11/16 inches)
- Maximum Height: 93 mm (3-11/16 inches)
- Weight: 2.9 kg (6 lb 7 oz)
Accessories and Options (Sold Separately):
- Included Accessories:
- STARTUP GUIDE
- Alkaline battery (AA, LR6) x 4
- Leaflet “USING THE UNIT SAFELY”
- Options:
- AC adaptor: PSA-S series
- Bluetooth® Audio MIDI Dual Adaptor: BT-DUAL
- Carry Bag: CB-ME80, CB-BU10
-
Boss FV-30 L Compact Volume Pedal
₹10,485.00Original price was: ₹10,485.00.₹9,500.00Current price is: ₹9,500.00.Add to cart- Space-saving volume pedals with rugged aluminum die-cast body designs
- Silky feel with smooth pivot for maximum control
- Tuner out jack (FV-30H)
- Stereo input and output (FV-30L)
- FV-30H for direct connection to high-impedance gear like electric guitars
- FV-30L for low-impedance gear like synthesizers and stompboxes
-
BOSS RC-600 LOOP STATION LOOPER PEDAL
₹72,965.00Original price was: ₹72,965.00.₹65,668.00Current price is: ₹65,668.00.Add to cartStandard Features
- Flagship floor-based Loop Station with next-level sound quality and flexibility
- Class-leading sound quality with 32-bit AD/DA and 32-bit floating-point processing
- Six simultaneous stereo phrase tracks
- Ultra-flexible onboard control with nine freely assignable footswitches and three pedal modes
- Massive onboard effects selection with 49 Input FX and 53 Track FX types and the ability to use four at once in each section
- Time-based effects can automatically sync to rhythms and loop tempo
- Two XLR mic inputs with phantom power, two stereo line input pairs, and three stereo assignable line output pairs
- 99 memories, each containing six phrase tracks, custom effects and playback settings, control assignments, and more
- Synchronize your loops with over 200 onboard rhythm patterns and 16 drum kits
- Deep MIDI control support
- Streamlined and durable metal body
- Large circular loop status indicator and informative LCD screen with selectable display modes
- Two external control jacks, each with support for up to two footswitches or an expression pedal
- USB for data backup, phrase import/export with BOSS Tone Studio, and pattern import with the RC Rhythm Converter
-
BOSS KATANA-50 MKII EX Guitar Amplifier
₹39,800.00Add to cartSpecifications:
- Rated Power Output: 50 W
- Nominal Input Level:
- INPUT: -10 dBu (1 M ohm)
- AUX IN: -10 dBu (20 k ohms)
- Speaker: 30 cm (12 inches) x 1
Controls:
- Power Controls:
- POWER switch
- MASTER knob
- POWER CONTROL switch (STANDBY, 0.5 W, 25 W, 50 W)
- Amplifier Controls:
- VARIATION button
- AMP TYPE switch (ACOUSTIC, CLEAN, CRUNCH, LEAD, BROWN)
- GAIN knob
- VOLUME knob
- Equalizer Controls:
- BASS knob
- MIDDLE knob
- TREBLE knob
- Multi Effect Controls:
- BOOSTER button
- MOD button
- FX button
- DELAY button
- REVERB button
- TAP button
- BOOSTER knob
- MOD knob
- FX knob
- DELAY knob
- REVERB knob
- Tone Setting Controls:
- CH1 button
- CH2 button
- PANEL button
Indicators:
- VARIATION
- BOOSTER
- MOD
- FX
- DELAY
- REVERB
- TAP
- CH1
- CH2
- PANEL
Connectors:
- Input/Output Connectors:
- INPUT jack: 1/4-inch phone type
- POWER AMP IN jack: 1/4-inch phone type
- LINE OUT jack: 1/4-inch phone type
- REC OUT/PHONES jack: Stereo 1/4-inch phone type
- EXP PEDAL/CTL CH1/CH2 jack: 1/4-inch TRS phone type
- GA-FC/CTL SOLO jack: 1/4-inch TRS phone type
- AUX IN jack: Stereo miniature phone type
- USB port: USB B type
- AC IN jack
Power:
- Power Consumption: 47 W
Accessories:
- Included:
- Owner’s Manual
- Power cord
- GA-FC sticker
- Options (Sold Separately):
- Footswitch: FS-5L, FS-6, FS-7
- Expression pedal: Roland EV-5, BOSS EV-30, FV-500L, FV-500H
- Foot Controller: GA-FC, GA-FC EX
- Amplifier Stand: BAS-1
- Amplifier Cover: BAC-KTN50
Size and Weight (Including handle and rubber feet):
- Dimensions:
- Width: 470 mm (18-9/16 inches)
- Depth: 238 mm (9-3/8 inches)
- Height: 398 mm (15-11/16 inches)
- Weight: 11.7 kg (25 lbs 13 oz)
Reviews
There are no reviews yet.