Product Showcase
Behringer Microamp HA400 Ultra-Compact 4 Channel Stereo Headphone Amplifier
Original price was: ₹6,367.00.₹4,800.00Current price is: ₹4,800.00.
|
Category |
Specification |
|---|---|
|
Type |
4-Channel Stereo Headphone Amplifier |
|
Input |
1 × ¼″ TRS stereo jack |
|
Input Impedance |
100 kΩ |
|
Max Input Level |
+15 dBu |
|
Outputs |
4 × ¼″ TRS headphone jacks |
|
Output Impedance |
~80 Ω |
|
Output Power |
~40 mW per channel into 100 Ω |
|
Frequency Response |
20 Hz – 20 kHz |
|
THD (Total Harmonic Distortion) |
< 0.005% |
|
SNR (Signal-to-Noise Ratio) |
> 90 dB |
|
Amplifier Type |
4580 operational amplifiers (low noise) |
|
Volume Controls |
Independent level control for each output |
|
Power Supply |
External 12 V DC adapter (150 mA, included) |
|
Power Type |
Passive unit (powered only via adapter) |
|
Chassis Material |
Metal |
|
Dimensions (W × H × D) |
104 × 57 × 47 mm (4.1” × 2.2” × 1.8”) |
|
Weight |
~0.37 kg (0.8 lbs) |
|
Warranty |
3 Years (Manufacturer Warranty) |
Out of stock
MICROAMP HA400
If you’re tracking more than one musician at a time, or if everyone in the group wants to listen to the playback, you’re need a monitor distribution system. A distribution system allows everyone to listen in, and control the volume of his or her own headphones. The compact and flexible HA400 can power up to 4 pairs of headphones and up to 4 independent volumes, with outstanding audio quality – even at maximum volume!
Altogether Now
You can use this super-compact stereo headphone amplifier with practically any headphones – four of them at the same time, to be exact! Let up to 4 different people in your studio listen to the main mix while recording, and each listener can determine their own preferred volume level using the dedicated output level controls. The HA400 contains 4 high-power stereo amplifiers that maintain the highest sonic quality even at maximum volume levels. Ultra low-noise 4580 operational amplifiers are employed for outstanding audio performance – these are the same op amps found in “full-size” audio equipment – plus, a dedicated 12-Volt DC adapter is included.
Great Sound, Great Value
When a recording session calls for everyone’s heads – and ears to be in the game, the HA400 is the perfect solution – and a real money-saver! Let your ears guide you by checking out the amazing HA400 at a BEHRINGER dealer near you – or get yours online today.
You must be logged in to post a review.
Related products
-
Laney MINI-STB-SUPERG Stereo 3W Guitar Amplifier with Bluetooth
Original price was: ₹10,000.00.₹8,000.00Current price is: ₹8,000.00.Add to cartSpecifications:
- 2 x 3” full range drivers
- Clean & Drive
- Item dimensions: 142mm x 205mm x 100mm (HWD)
- Carton dimensions: 152mm x 213mm x 110mm (HWD)
- Item weight: 1.20kg
-
Behringer Ultra-DI DI100 Direct Box
Original price was: ₹10,198.00.₹6,700.00Current price is: ₹6,700.00.Read moreCategory
Specification
Type
Active DI box
Channels
1
Frequency Response
10 Hz – 93 kHz
Noise Level
–110 dBu
THD + N (@1 kHz/0 dBu)
< 0.005 %
Input Impedance
> 250 kΩ
Load Impedance
> 600 Ω
Max Input Level
+10 / +30 / +50 dBu (via switchable pads)
Pads
Switchable -20 dB each (–20 dB & –40 dB total)
Ground Lift
Yes
Inputs
1× unbalanced ¼″ jack (in/link out), 1× unbalanced XLR
Outputs
1× balanced XLR out, 1× ¼″ link out
Power Supply
Phantom power 18–48 V DC or 9 V battery (auto-switching, battery off when phantom present)
Special Features
OT-1 output transformer, handles up to 3,000 W speaker-level input, rugged aluminum case, battery auto-off when phantom power applied
Dimensions
150 × 130 × 60 mm (≈5.91″ × 5.12″ × 2.36″)
Weight
~650 g
-
Behringer MicroHD HD400 2-Channel Hum Destroyer
Original price was: ₹5,165.00.₹4,200.00Current price is: ₹4,200.00.Read moreCategory
Specification
Type
Passive 2-channel hum destroyer / ground‑loop isolator
Channels
2 (can handle either 2 mono or 1 stereo signal)
Signal Conversion
Converts unbalanced ↔ balanced signals automatically, with no signal loss
Inputs
2 × ¼″ TRS phone jacks
Outputs
2 × ¼″ TRS phone jacks
Input Impedance
~500 Ω (unbalanced)
Output Impedance
~600 Ω (balanced)
Dimensions (W × H × D)
104 × 32 × 57 mm
Weight
~180 g
Power
Passive, no power required
Body Construction
Rugged, compact metal housing
Special Features
Removes AC hum/noise, breaks ground loops, maintains audio quality
-
Laney IRT120H Ironheart Guitar Amplifier Head
Original price was: ₹132,000.00.₹75,000.00Current price is: ₹75,000.00.Add to cartLaney IRT120H Ironheart Guitar Amplifier Head Specifications:
- Power RMS: 120 watts RMS
- Inputs: 1 x Jack
- Channels: 3 – Clean, Rhythm & Lead
- Equalisation: Bass, Middle & Treble with Pull-Push EQ shift on each
- Master Presence Control: Overall Tone
- Boost Switch: Footswitchable Pre Boost
- Preamp Valves: 4 x ECC83
- Output Valves: 4 x 6L6
- Class: Class AB
- Reverb: Laney designed Digital reverb
- Footswitch: FS4-IRT supplied as standard – switches Channel, Clean, Reverb & Pre Boost
- Speaker connections: 2 jack sockets – 4, 8 or 16 Ohms
- FX Loop: Yes – variable level FX loop
- Weight: 20Kg Unit Weight (24kg) Shipping
- Dimensions (W x H x D): 678 x 271 x 288 mm.
Reviews
There are no reviews yet.