Category
- ACCESSORIES
- AUDIO INTERFACES
- BOSS
- brass and wood winds
- DJ CONTROLLERS
- DRUMS & PERCUSSION
- EFFECTS PROCESSOR
- GUITAR
- KEYBOARDS
- OTHER
- PIANO
- SPEAKER
- STOCK CLEARANCE SALE
- STUDIO/ RECORDING
- VIOLINS

Behringer Microamp HA400 Ultra-Compact 4 Channel Stereo Headphone Amplifier
₹6,367.00 Original price was: ₹6,367.00.₹4,800.00Current price is: ₹4,800.00.
|
Category |
Specification |
|---|---|
|
Type |
4-Channel Stereo Headphone Amplifier |
|
Input |
1 × ¼″ TRS stereo jack |
|
Input Impedance |
100 kΩ |
|
Max Input Level |
+15 dBu |
|
Outputs |
4 × ¼″ TRS headphone jacks |
|
Output Impedance |
~80 Ω |
|
Output Power |
~40 mW per channel into 100 Ω |
|
Frequency Response |
20 Hz – 20 kHz |
|
THD (Total Harmonic Distortion) |
< 0.005% |
|
SNR (Signal-to-Noise Ratio) |
> 90 dB |
|
Amplifier Type |
4580 operational amplifiers (low noise) |
|
Volume Controls |
Independent level control for each output |
|
Power Supply |
External 12 V DC adapter (150 mA, included) |
|
Power Type |
Passive unit (powered only via adapter) |
|
Chassis Material |
Metal |
|
Dimensions (W × H × D) |
104 × 57 × 47 mm (4.1” × 2.2” × 1.8”) |
|
Weight |
~0.37 kg (0.8 lbs) |
|
Warranty |
3 Years (Manufacturer Warranty) |
Out of stock
MICROAMP HA400
If you’re tracking more than one musician at a time, or if everyone in the group wants to listen to the playback, you’re need a monitor distribution system. A distribution system allows everyone to listen in, and control the volume of his or her own headphones. The compact and flexible HA400 can power up to 4 pairs of headphones and up to 4 independent volumes, with outstanding audio quality – even at maximum volume!
Altogether Now
You can use this super-compact stereo headphone amplifier with practically any headphones – four of them at the same time, to be exact! Let up to 4 different people in your studio listen to the main mix while recording, and each listener can determine their own preferred volume level using the dedicated output level controls. The HA400 contains 4 high-power stereo amplifiers that maintain the highest sonic quality even at maximum volume levels. Ultra low-noise 4580 operational amplifiers are employed for outstanding audio performance – these are the same op amps found in “full-size” audio equipment – plus, a dedicated 12-Volt DC adapter is included.
Great Sound, Great Value
When a recording session calls for everyone’s heads – and ears to be in the game, the HA400 is the perfect solution – and a real money-saver! Let your ears guide you by checking out the amazing HA400 at a BEHRINGER dealer near you – or get yours online today.
You must be logged in to post a review.
Related products
-
PreSonus BlueTube DP V2
₹32,490.00Original price was: ₹32,490.00.₹28,990.00Current price is: ₹28,990.00.Add to cart- A value-packed 2-channel preamp that lets you dial in a huge range of tone
- XMAX Class A solid-state preamps give you clean and clear sound
- Parallel 12AX7-driven tube preamps lets you blend in tube saturation to warm up your tone
- Switchable 48V phantom power provides compatibility with any kind of microphone
- Backlit VU meters with LED clip indicators make it easy to keep an eye on your levels
- Rugged rackmountable 1/2U chassis is also perfect for tabletop use
-
Behringer HA8000 V2 8-Channel Headphone Mixing/Distribution Amplifier
₹38,444.00Original price was: ₹38,444.00.₹20,000.00Current price is: ₹20,000.00.Add to cartCategory
Specification
Type
8‑channel headphone mixing/distribution amplifier (1 U rack)
Amplifier Channels
8 independent high‑power stereo amplifiers, each with level control and LED meter
Main Inputs
2 × stereo (Main In 1 & 2), ¼″ TRS, servo-balanced
Main Input Impedance
Balanced: 40 kΩ; Unbalanced: 20 kΩ
Max Main Input Level
+16 dBu (some sources list +22 dBu)
Direct Inputs
8 × independent ¼″ TRS (one per channel)
Direct Input Impedance
~15 kΩ
Phone Outputs
16 × ¼″ TRS (8 front, 8 rear), dual per channel
Max Output Level
+24 dBm into 100 Ω, +19 dBm into 8 Ω
Minimum Load Impedance
8 Ω
Frequency Response
10 Hz – 150 kHz, ±3 dB
Dynamic Range
~101–103 dB (22 Hz–22 kHz)
Signal‑to‑Noise Ratio
> 87 dB or > 90 dB depending on spec
THD + N
~0.006–0.007 % @ +4 dBu, 1 kHz
Controls (per channel)
Output level knob, Main In 1/2 select, Mono/Stereo switch, 8-digit LED meter
Master Controls
Two Main Input level dials, 5-segment Input LED meter
Power Supply
“Planet Earth” switching supply (100–240 V AC autorange), draws ~35 W
Dimensions (H×W×D)
44 × 483 × 149 mm (1.75″ × 19″ × 5.9″)
Weight
~1.9 kg (4.2 lb)
Warranty
3 years (varies by region)
-
Behringer Powerplay P1 Personal In-Ear Monitor Amplifier
₹16,515.00Original price was: ₹16,515.00.₹8,500.00Current price is: ₹8,500.00.Read moreCategory
Specification
Type
Personal in-ear monitor (IEM) amplifier
Inputs
2 × balanced XLR (mono/stereo)
Main Controls
Volume (level) knob, Balance/Mix knob (dual-channel mixing)
Output
3.5 mm (1/8″) headphone jack
Input Impedance
20 kΩ
Output Impedance
10 Ω per channel
Frequency Response
20 Hz – 80 kHz (±0.5 dB)
THD + N
0.01 %
Signal-to-Noise Ratio
> 90 dB (A‑weighted)
CMRR
> 50 dB
Crosstalk
> 40 dB
Normal Input Level
+2 dBu
Max Input Level
+6 dBu
Limiter Threshold
+7 dBu
Max Output Level
+9.5 dBu
Limiter
Built-in current limiter
Power Supply
9 V battery (alkaline or rechargeable) or optional 9 V DC adapter
Battery Life
Up to 12 hours (9 V battery)
Standby Power Consumption
300 mW
Max Operating Current
90 mA
Max Output Power
40 mW per channel into 20 Ω
Indicators
Power and battery status LEDs (green/red)
Chassis & Mounting
Rugged metal housing, belt clip, mic-stand mountable (5/8″ & 3/8″)
Dimensions (H × W × D)
45 × 125 × 85 mm (1.8″ × 4.9″ × 3.3″)
Weight
0.27 kg (0.6 lb)
-
Nektar MIDIFLEX4
₹9,400.00Original price was: ₹9,400.00.₹8,490.00Current price is: ₹8,490.00.Add to cartFeatures:
- USB Class Compliant MIDI Interface
- 4 configurable MIDI Ports: 1-in / 3-out, 2-in / 2-out, or 4 out
- Automatic MIDI connection detection
- Multiple units can be used at the same time to expand the number of MIDI ports
- 2-1 MIDI merge or 1-3 MIDI split in standalone mode (requires optional USB power supply)
- Aluminum housing with 4 port status LEDs, 1 power LED, and a mode button
- Connections: 4 x MIDI DIN socket, 1 x USB Type-B
- Powered by USB or optional external standard USB power supply
- Includes standard USB cable




















Reviews
There are no reviews yet.