Category
- ACCESSORIES
- AUDIO INTERFACES
- BOSS
- brass and wood winds
- DJ CONTROLLERS
- DRUMS & PERCUSSION
- EFFECTS PROCESSOR
- GUITAR
- KEYBOARDS
- OTHER
- PIANO
- SPEAKER
- STOCK CLEARANCE SALE
- STUDIO/ RECORDING
- VIOLINS

Behringer HA8000 V2 8-Channel Headphone Mixing/Distribution Amplifier
₹38,444.00 Original price was: ₹38,444.00.₹20,000.00Current price is: ₹20,000.00.
|
Category |
Specification |
|---|---|
|
Type |
8‑channel headphone mixing/distribution amplifier (1 U rack) |
|
Amplifier Channels |
8 independent high‑power stereo amplifiers, each with level control and LED meter |
|
Main Inputs |
2 × stereo (Main In 1 & 2), ¼″ TRS, servo-balanced |
|
Main Input Impedance |
Balanced: 40 kΩ; Unbalanced: 20 kΩ |
|
Max Main Input Level |
+16 dBu (some sources list +22 dBu) |
|
Direct Inputs |
8 × independent ¼″ TRS (one per channel) |
|
Direct Input Impedance |
~15 kΩ |
|
Phone Outputs |
16 × ¼″ TRS (8 front, 8 rear), dual per channel |
|
Max Output Level |
+24 dBm into 100 Ω, +19 dBm into 8 Ω |
|
Minimum Load Impedance |
8 Ω |
|
Frequency Response |
10 Hz – 150 kHz, ±3 dB |
|
Dynamic Range |
~101–103 dB (22 Hz–22 kHz) |
|
Signal‑to‑Noise Ratio |
> 87 dB or > 90 dB depending on spec |
|
THD + N |
~0.006–0.007 % @ +4 dBu, 1 kHz |
|
Controls (per channel) |
Output level knob, Main In 1/2 select, Mono/Stereo switch, 8-digit LED meter |
|
Master Controls |
Two Main Input level dials, 5-segment Input LED meter |
|
Power Supply |
“Planet Earth” switching supply (100–240 V AC autorange), draws ~35 W |
|
Dimensions (H×W×D) |
44 × 483 × 149 mm (1.75″ × 19″ × 5.9″) |
|
Weight |
~1.9 kg (4.2 lb) |
|
Warranty |
3 years (varies by region) |
An articulate headphone mix can make all the difference in the outcome of a recording session. The 8-channel POWERPLAY PRO-8 HA8000 features superior performance, routing and mixing functions to accommodate even the most discerning set of ears. Two independent stereo Main Inputs, along with a dedicated Direct Input on each channel allows individual performers to obtain a more customized monitoring mix. When optimized mixes have to reach multiple listeners, each with their own specific requirements, the HA8000 delivers high-quality headphone mixing – in a class all its own!
All Together Now
The HA8000 offers 8 high-power amplifiers that can drive loads down to 8 Ohms. Each amplifier section features its own 8-digit LED Output Level meter, Main In 1/Main In 2 select switch, a stereo or dual mono select switch, and a ¼” Direct Input for integrating an additional sound source. The front panel gives you one ¼ ” Phones Out jack per channel. The Main Section features a dedicated 5-segment LED Input meter, plus Main In 1 and Main In 2 Level dials.
Connections
On the back panel you‘ll find an additional ¼” Phones Output per channel, allowing up to 16 pairs of headphones to listen to 8 separate mixes at once. The back panel also provides access to the HA8000’s per-channel Direct Inputs and the Main 1 & 2 Inputs.
Great Sound, Great Value
When a recording session calls for everyone‘s head and ears to be in the game, the POWERPLAY PRO-8 HA8000 is essential – and ultra-affordable. With 8 discrete channels and the ability to connect up to 16 sets of cans, this is one tool you will use every day.
Features:
- Professional, multi-purpose headphones amplifier system for stage and studio applications
- Highest sonic quality with virtually all types of headphones even at maximum volume
- 8 totally independent stereo high-power amplifier sections in one rack space
- 2 stereo Main inputs for two independent mixes, accessible from all 8 output channels
- 8 independent Direct inputs provide up to 8 individual stereo mixes
- Output level control and accurate 8-digit LED output meter per channel
- Mono/stereo switch per channel for more flexibility
- 1 front and 1 rear TRS phones connector per channel
- Direct input connector on each channel for easy connection of any sound source
- Parallel Main outputs allow cascading of several headphones amplifiers
- “Planet Earth” switching power supply for maximum flexibility (100-240 V~), noise-free audio, superior transient response plus low power consumption for energy savings
- Designed and engineered in Germany
You must be logged in to post a review.
Related products
-
Behringer Ultra-DI DI100 Direct Box
₹10,198.00Original price was: ₹10,198.00.₹6,700.00Current price is: ₹6,700.00.Read moreCategory
Specification
Type
Active DI box
Channels
1
Frequency Response
10 Hz – 93 kHz
Noise Level
–110 dBu
THD + N (@1 kHz/0 dBu)
< 0.005 %
Input Impedance
> 250 kΩ
Load Impedance
> 600 Ω
Max Input Level
+10 / +30 / +50 dBu (via switchable pads)
Pads
Switchable -20 dB each (–20 dB & –40 dB total)
Ground Lift
Yes
Inputs
1× unbalanced ¼″ jack (in/link out), 1× unbalanced XLR
Outputs
1× balanced XLR out, 1× ¼″ link out
Power Supply
Phantom power 18–48 V DC or 9 V battery (auto-switching, battery off when phantom present)
Special Features
OT-1 output transformer, handles up to 3,000 W speaker-level input, rugged aluminum case, battery auto-off when phantom power applied
Dimensions
150 × 130 × 60 mm (≈5.91″ × 5.12″ × 2.36″)
Weight
~650 g
-
Behringer Microamp HA400 Ultra-Compact 4 Channel Stereo Headphone Amplifier
₹6,367.00Original price was: ₹6,367.00.₹4,800.00Current price is: ₹4,800.00.Read moreCategory
Specification
Type
4-Channel Stereo Headphone Amplifier
Input
1 × ¼″ TRS stereo jack
Input Impedance
100 kΩ
Max Input Level
+15 dBu
Outputs
4 × ¼″ TRS headphone jacks
Output Impedance
~80 Ω
Output Power
~40 mW per channel into 100 Ω
Frequency Response
20 Hz – 20 kHz
THD (Total Harmonic Distortion)
< 0.005%
SNR (Signal-to-Noise Ratio)
> 90 dB
Amplifier Type
4580 operational amplifiers (low noise)
Volume Controls
Independent level control for each output
Power Supply
External 12 V DC adapter (150 mA, included)
Power Type
Passive unit (powered only via adapter)
Chassis Material
Metal
Dimensions (W × H × D)
104 × 57 × 47 mm (4.1” × 2.2” × 1.8”)
Weight
~0.37 kg (0.8 lbs)
Warranty
3 Years (Manufacturer Warranty)
-
Evo SP8
₹60,000.00Original price was: ₹60,000.00.₹53,990.00Current price is: ₹53,990.00.Add to cartFeatures:
● 8x EVO Mic Preamps
● 2x JFET Instrument Inputs
● 8x Line Outputs
● 2x ADAT Inputs
● 2x ADAT Outputs
● Class Leading 32-bit AD/DA Converters
● Multi-Channel Smartgain
● ‘EVO Motion UI’ Control System
● Optional Rack Ears
● Word Clock Input
● 24bit / 96kHz -
Laney IRT120H Ironheart Guitar Amplifier Head
₹132,000.00Original price was: ₹132,000.00.₹75,000.00Current price is: ₹75,000.00.Add to cartLaney IRT120H Ironheart Guitar Amplifier Head Specifications:
- Power RMS: 120 watts RMS
- Inputs: 1 x Jack
- Channels: 3 – Clean, Rhythm & Lead
- Equalisation: Bass, Middle & Treble with Pull-Push EQ shift on each
- Master Presence Control: Overall Tone
- Boost Switch: Footswitchable Pre Boost
- Preamp Valves: 4 x ECC83
- Output Valves: 4 x 6L6
- Class: Class AB
- Reverb: Laney designed Digital reverb
- Footswitch: FS4-IRT supplied as standard – switches Channel, Clean, Reverb & Pre Boost
- Speaker connections: 2 jack sockets – 4, 8 or 16 Ohms
- FX Loop: Yes – variable level FX loop
- Weight: 20Kg Unit Weight (24kg) Shipping
- Dimensions (W x H x D): 678 x 271 x 288 mm.

















Reviews
There are no reviews yet.