Product Showcase
ART Digital MPA-II 2-Channel Tube Preamp with Digital Connectivity
Original price was: ₹66,435.00.₹51,000.00Current price is: ₹51,000.00.
Specifications
| Input Impedance | 150-3000 (Omega) Adjustable (XLR), >800k (Omega) (Instrument) |
| Output Impedance | < 47 (Omega) (XLR) |
| Maximum Input Level | +19 dBu (Cannon) |
| Maximum Output Level | +27 dBu (XLR) |
| Maximum Gain | 75 dB |
| Frequency Response | 15 Hz to 48 kHz (+0, -1 dB) @ Normal Plate Voltage 15 Hz to 120 kHz (+0, -1 dB) @ High Plate Voltage |
| Total Harmonic Distortion | <0.005% (Typical) |
| Equivalent Input Noise | -129 dBu (XLR, “A” Weighted) |
| CMRR | >90dB |
| Power Requirements | USA – 105 to 125 VAC / 60 Hz Export Units Configured forCcountry of Destination |
The Digital MPA II is a two-channel preamp with streamlined controls and real tube tone in a 2U rackmount enclosure. It offers the features and sound of the Pro MPA II, with extended connectivity for any digital recording setup.
In addition to the analog XLR and 1/4 connections, it features AES/EBU, S/PDIF, and optical outputs. It also features an optical input and word clock input and thru jacks. Sample rate and dither is set by a rotary control on the front panel.
Simple to use and easy to integrate, the Digital MPA II offers classic tube warmth for the modern studio.
Features
- Variable Input Impedance For Flexible Microphone Voicing (150 ohms To 2400 ohms)
- Selectable Plate Voltage
- Large VU Meters
- Backlit Function Switches
- Discrete Class-A Input Microphone Preamplifier
- Low Noise at Lower Gain Settings
- Extremely Low Total Harmonic Distortion (THD)
- Wide Frequency Response
- Additional Front Mounted Instrument Input Jack
- Supports Mid/Side Miking Technique
- Operates at +4dbm/-10dbv Output
- Selectable Stereo/Dual Operation of Output Controls
- Automatic Instrument Input Selection
- 24-204KHz External sample rate
- 44.1K, 48K, 88.2K, 96K, 176.4K, 192K Internal sample rates
- 24/16 bit switchable dithering
- Wide dynamic range A/D
- Rotary Encoder for quick selection of sample rate
- Separate analog and digital output level controls
- Digital Level LED meters display both Average and Peak level
- ADAT optical I/O
- Sync to incoming ADAT data rate
- Switch selectable optical output (S/PDIF or ADAT)
- AES/EBU and S/PDIF outputs
You must be logged in to post a review.
Related products
-
Behringer HA8000 V2 8-Channel Headphone Mixing/Distribution Amplifier
Original price was: ₹38,444.00.₹20,000.00Current price is: ₹20,000.00.Add to cartCategory
Specification
Type
8‑channel headphone mixing/distribution amplifier (1 U rack)
Amplifier Channels
8 independent high‑power stereo amplifiers, each with level control and LED meter
Main Inputs
2 × stereo (Main In 1 & 2), ¼″ TRS, servo-balanced
Main Input Impedance
Balanced: 40 kΩ; Unbalanced: 20 kΩ
Max Main Input Level
+16 dBu (some sources list +22 dBu)
Direct Inputs
8 × independent ¼″ TRS (one per channel)
Direct Input Impedance
~15 kΩ
Phone Outputs
16 × ¼″ TRS (8 front, 8 rear), dual per channel
Max Output Level
+24 dBm into 100 Ω, +19 dBm into 8 Ω
Minimum Load Impedance
8 Ω
Frequency Response
10 Hz – 150 kHz, ±3 dB
Dynamic Range
~101–103 dB (22 Hz–22 kHz)
Signal‑to‑Noise Ratio
> 87 dB or > 90 dB depending on spec
THD + N
~0.006–0.007 % @ +4 dBu, 1 kHz
Controls (per channel)
Output level knob, Main In 1/2 select, Mono/Stereo switch, 8-digit LED meter
Master Controls
Two Main Input level dials, 5-segment Input LED meter
Power Supply
“Planet Earth” switching supply (100–240 V AC autorange), draws ~35 W
Dimensions (H×W×D)
44 × 483 × 149 mm (1.75″ × 19″ × 5.9″)
Weight
~1.9 kg (4.2 lb)
Warranty
3 years (varies by region)
-
Laney IRT120H Ironheart Guitar Amplifier Head
Original price was: ₹132,000.00.₹75,000.00Current price is: ₹75,000.00.Add to cartLaney IRT120H Ironheart Guitar Amplifier Head Specifications:
- Power RMS: 120 watts RMS
- Inputs: 1 x Jack
- Channels: 3 – Clean, Rhythm & Lead
- Equalisation: Bass, Middle & Treble with Pull-Push EQ shift on each
- Master Presence Control: Overall Tone
- Boost Switch: Footswitchable Pre Boost
- Preamp Valves: 4 x ECC83
- Output Valves: 4 x 6L6
- Class: Class AB
- Reverb: Laney designed Digital reverb
- Footswitch: FS4-IRT supplied as standard – switches Channel, Clean, Reverb & Pre Boost
- Speaker connections: 2 jack sockets – 4, 8 or 16 Ohms
- FX Loop: Yes – variable level FX loop
- Weight: 20Kg Unit Weight (24kg) Shipping
- Dimensions (W x H x D): 678 x 271 x 288 mm.
-
Nektar MIDIFLEX4
Original price was: ₹9,400.00.₹8,490.00Current price is: ₹8,490.00.Add to cartFeatures:
- USB Class Compliant MIDI Interface
- 4 configurable MIDI Ports: 1-in / 3-out, 2-in / 2-out, or 4 out
- Automatic MIDI connection detection
- Multiple units can be used at the same time to expand the number of MIDI ports
- 2-1 MIDI merge or 1-3 MIDI split in standalone mode (requires optional USB power supply)
- Aluminum housing with 4 port status LEDs, 1 power LED, and a mode button
- Connections: 4 x MIDI DIN socket, 1 x USB Type-B
- Powered by USB or optional external standard USB power supply
- Includes standard USB cable
-
Evo SP8
Original price was: ₹55,990.00.₹49,990.00Current price is: ₹49,990.00.Add to cartFeatures:
● 8x EVO Mic Preamps
● 2x JFET Instrument Inputs
● 8x Line Outputs
● 2x ADAT Inputs
● 2x ADAT Outputs
● Class Leading 32-bit AD/DA Converters
● Multi-Channel Smartgain
● ‘EVO Motion UI’ Control System
● Optional Rack Ears
● Word Clock Input
● 24bit / 96kHz
Reviews
There are no reviews yet.