Category: Single Units
Showing 1–12 of 48 results
-
BOSS AD-2 Acoustic Preamp
₹11,655.00Read moreSpecifications
- Nominal Input Level: -20 dBu
- Input Impedance: 10 M ohms
Output Section:
- Nominal Output Level:
- OUTPUT jack: -20 dBu
- LINE OUT jack: -20 dBu
- Output Impedance:
- OUTPUT jack: 1 k ohm
- LINE OUT jack: 600 ohms
- Recommended Load Impedance:
- OUTPUT jack: 10 k ohms or greater
- LINE OUT jack: 600 ohms or greater
Bypass:
- Buffered bypass
Controls:
- Pedal switch
- ACOUSTIC RESONANCE knob
- AMBIENCE knob
- NOTCH knob
Indicator:
- CHECK indicator (Serves also as battery check indicator)
Connectors:
- INPUT jack: 1/4-inch phone type
- OUTPUT jack: 1/4-inch phone type
- LINE OUT jack: 1/4-inch TRS phone type
- DC IN jack
Power Supply:
- Alkaline battery (9V, 6LR61)
- AC adaptor (sold separately)
- Current Draw: 65 mA
- Expected battery life under continuous use:
- Alkaline: Approx. 5 hours
These figures will vary depending on the actual conditions of use.
- Alkaline: Approx. 5 hours
Accessories:
- Leaflet (“USING THE UNIT SAFELY,” “IMPORTANT NOTES,” and “Information”)
- Alkaline battery (9V, 6LR61)
- Option (sold separately): AC adaptor (PSA series)
Size and Weight:
- Width: 73 mm (2-7/8 inches)
- Depth: 129 mm (5-1/8 inches)
- Height: 59 mm (2-3/8 inches)
- Weight (including battery): 420 g (15 oz)
-
BOSS BB-1X Bass Driver Effects Pedal
₹21,989.00Add to cartFeatures
- Bold, punchy sound that invigorates the original tone and responsiveness of your bass and amp
- Contains BOSS’ latest distortion, which adapts to every register and never muffles your low end
- Blend knob allows for mixing the direct signal with the effect signal
- Independent Low and High knobs for ultra-wide tonal adjustment
- Two output jacks: a normal output for a bass amp and a Line Out for a balanced connection directly to a PA or recorder
- The Line Out jack provides a modern and enhanced direct sound that brings out new characteristics in your tone
- The newest member of the special-edition X-series BOSS compact pedals, which offer premium looks, sound, and feel
- BOSS five-year warranty
-
BOSS BD-2W Blues Driver
₹19,256.00Add to cartSpecifications
- Nominal Input Level:
- -20 dBu
- Standard for guitar-level input signals.
- Input Impedance:
- 1 M ohm
- High impedance, ideal for guitars and other high-impedance instruments.
- Nominal Output Level:
- -20 dBu
- Standard output level for the processed signal.
- Output Impedance:
- 1 k ohm
- Compatible with most amplifiers and other pedals in your signal chain.
- Recommended Load Impedance:
- 10 k ohms or greater
- Ensures optimal performance when connected to amplifiers or other devices.
Bypass
- Buffered Bypass:
- Ensures that the guitar’s tone remains intact when the pedal is bypassed.
Controls
- Pedal Switch:
- Turns the pedal on or off.
- Mode Switch:
- Allows you to switch between different distortion modes for a range of tonal options.
- LEVEL Knob:
- Controls the output volume of the pedal.
- TONE Knob:
- Adjusts the overall tone, allowing you to make the sound brighter or darker.
- GAIN Knob:
- Adjusts the amount of distortion applied to the signal.
Power Supply
- Battery Options:
- Alkaline 9V battery (6LR61)
- Carbon-zinc 9V battery (6F22)
- AC Adaptor:
- PSA series (sold separately)
- Current Draw:
- 18 mA — Low power consumption for extended use.
- Expected Battery Life:
- Carbon-zinc: Approx. 20 hours of continuous use.
- Alkaline: Approx. 35 hours of continuous use.
Indicators
- CHECK Indicator:
- Serves as both the pedal status indicator and battery check light, ensuring you are aware of the pedal’s operational status.
Connectors
- INPUT Jack:
- For connecting your instrument (guitar, bass, etc.).
- OUTPUT Jack:
- For sending the processed signal to your amplifier or other pedals.
- DC IN Jack:
- For connecting to an external power supply (PSA series AC adapter).
Accessories
- Included:
- Leaflet with safety instructions and usage guidelines.
- Carbon-zinc 9V battery (6F22).
- Optional (sold separately):
- AC Adaptor: PSA series.
Size and Weight
- Width:
- 73 mm (2-7/8 inches)
- Depth:
- 129 mm (5-1/8 inches)
- Height:
- 59 mm (2-3/8 inches)
- Weight (including battery):
- 430 g (1 lb)
- Nominal Input Level:
-
BOSS BF-3 Flanger
₹18,484.00Add to cartSpecifications
- Nominal Input Level:
- -20 dBu
- Input Impedance:
- 1 M ohm
- Nominal Output Level:
- -20 dBu
- Output Impedance:
- 1 k ohm
- Recommended Load Impedance:
- 10 k ohms or greater
- Bypass:
- Buffered bypass
Controls
- MODE Knob:
- Adjusts the effect mode.
- RATE Knob:
- Adjusts the rate of modulation.
- DEPTH Knob:
- Controls the intensity of the effect.
- RES (Resonance)/MANUAL Knob:
- Adjusts resonance or manual control, depending on the mode.
- Pedal Switch:
- Activates or deactivates the effect.
Indicators
- CHECK Indicator:
- Used for indicating battery status.
Connectors
- GUITAR IN Jack:
- 1/4-inch phone type
- For guitar input.
- BASS IN Jack:
- 1/4-inch phone type
- For bass input.
- OUTPUT A (MONO) Jack:
- 1/4-inch phone type
- For mono output.
- OUTPUT B Jack:
- 1/4-inch phone type
- For stereo output.
- DC IN Jack:
- For connecting an external power supply.
Power Supply
- Battery Options:
- Alkaline: 9V, 6LR61
- AC Adaptor:
- PSA series (sold separately)
- Current Draw:
- 60 mA
- Expected Battery Life (under continuous use):
- Alkaline: Approx. 4 hours
- Note: These figures may vary depending on actual usage conditions.
Accessories
- Included:
- Leaflet (“USING THE UNIT SAFELY,” “IMPORTANT NOTES,” and “Information”)
- Registration Card
- Alkaline 9V Battery (6LR61)
- Optional (sold separately):
- AC Adaptor: PSA series
Size and Weight
- Width:
- 73 mm (2-7/8 inches)
- Depth:
- 129 mm (5-1/8 inches)
- Height:
- 59 mm (2-3/8 inches)
- Weight (including battery):
- 425 g (15 oz)
- Nominal Input Level:
-
-
BOSS CE-2W Chorus Waza Craft Special Edition
₹25,793.00Read moreSpecifications
- Modes:
3 modes- Standard
- CE-1 Chorus
- CE-1 Vibrato
- Nominal Input Level: -20 dBu
- Input Impedance: 1 M ohm
Output Section:
- Nominal Output Level: -20 dBu
- Output Impedance: 1 k ohm
- Recommended Load Impedance: 10 k ohms or greater
Bypass:
- Buffered bypass
Controls:
- Pedal switch
- Standard/CE-1 Mode switch
- RATE knob
- DEPTH knob
Indicator:
- CHECK indicator (Serves also as battery check indicator)
Connectors:
- INPUT jack: 1/4-inch phone type
- OUTPUT A (MONO) jack: 1/4-inch phone type
- OUTPUT B jack: 1/4-inch phone type
- DC IN jack
Power Supply:
- Alkaline battery (9V, 6LR61) or Carbon-zinc battery (9V, 6F22)
- AC adaptor (sold separately)
- Current Draw: 25 mA
- Expected battery life under continuous use:
- Alkaline: Approx. 32 hours
- Carbon: Approx. 18 hours
These figures will vary depending on the actual conditions of use.
Accessories:
- Leaflet (“USING THE UNIT SAFELY,” “IMPORTANT NOTES,” and “Information”)
- Alkaline battery (9V, 6LR61)
Options (sold separately):
- AC adaptor: PSA series
Size and Weight:
- Width: 73 mm (2-7/8 inches)
- Depth: 129 mm (5-1/8 inches)
- Height: 59 mm (2-3/8 inches)
- Weight (including battery): 450 g (1 lb)
- Modes:
-
BOSS CH-1 Super Chorus
₹13,938.00Add to cartTuning and Signal Features:
- Nominal Input Level: -20 dBu, which is typical for guitar or bass-level input signals.
- Input Impedance: 1 M ohm, making it suitable for high-impedance instruments like electric guitars or basses.
- Nominal Output Level: -20 dBu.
- Output Impedance: 1 k ohm, which is standard for most pedals, allowing compatibility with amplifiers or other audio devices.
- Recommended Load Impedance: 10 k ohms or greater, ensuring compatibility with most amplifiers.
Bypass:
- Buffered Bypass: Ensures that the signal remains clear and unaffected when the pedal is turned off.
Controls:
- DEPTH Knob: Likely adjusts the intensity or amount of effect applied to the signal. Increasing the depth will typically result in a more pronounced modulation effect.
- RATE Knob: Controls the speed or rate at which the modulation (such as chorus or tremolo) occurs.
- EQ Knob: Likely adjusts the tonal balance, allowing you to shape the frequency response of the effect (e.g., making the modulation brighter or darker).
- E.LEVEL Knob: Adjusts the output level of the effected signal, allowing you to match it with the bypassed signal or other pedals in your signal chain.
- Pedal Switch: Engages or bypasses the effect.
Power Supply:
- Battery Options:
- Alkaline 9V battery (6LR61).
- AC Adaptor: PSA series (sold separately).
- Current Draw:
- 55 mA, which is relatively low for most pedals.
- Expected Battery Life:
- Alkaline: Approx. 6 hours of continuous use.
Indicators:
- CHECK Indicator: Lights up to indicate that the battery is low or needs to be replaced, and also shows when the pedal is operating.
Connectors:
- INPUT Jack: 1/4-inch phone type for connecting your instrument (guitar, bass, etc.).
- OUTPUT A/B Jack: 1/4-inch phone type for sending the processed signal to your amplifier or next device in the signal chain.
- DC IN Jack: For connecting an external power supply (PSA series AC adapter).
Accessories:
- Included: Leaflet with safety and usage instructions, 9V alkaline battery (6LR61).
- Optional: AC Adaptor (PSA series, sold separately).
Size and Weight:
- Width: 73 mm (2-7/8 inches).
- Depth: 129 mm (5-1/8 inches).
- Height: 59 mm (2-3/8 inches).
- Weight (including battery): 420 g (15 oz).
-
BOSS CS-3 Compression Sustainer
₹11,655.00Add to cartSignal Specifications:
- Nominal Input Level: -20 dBu
- Standard for guitar-level input signals.
- Input Impedance: 1 M ohm
- High impedance suitable for guitars and other high-impedance instruments.
- Nominal Output Level: -20 dBu
- The level of the output signal.
- Output Impedance: 1 k ohm
- Compatible with most amplifiers and effects pedals.
- Recommended Load Impedance: 10 k ohms or greater
- Ensures optimal performance with a wide range of amplifiers and signal chains.
Bypass:
- Buffered Bypass:
- Keeps the signal intact and clean when the pedal is turned off, preserving the original tone of your instrument.
Controls:
- SUSTAIN Knob:
- Adjusts the amount of compression. Higher sustain will make quieter notes louder and louder notes quieter.
- ATTACK Knob:
- Controls the speed at which compression kicks in. A fast attack compresses quickly, while a slower attack lets transient sounds (like pick attack) through.
- TONE Knob:
- Shapes the tone of the output signal, allowing you to adjust for brighter or darker sounds.
- LEVEL Knob:
- Adjusts the output volume of the compressed signal to balance with the bypassed signal or set the desired loudness.
Power Supply:
- Battery Options:
- Carbon-zinc 9V battery (6F22).
- Alkaline 9V battery (6LR61).
- AC Adaptor:
- PSA series (sold separately).
- Current Draw:
- 20 mA — Low power consumption for extended battery life.
- Expected Battery Life:
- Carbon-zinc: Approx. 10.5 hours of continuous use.
- Alkaline: Approx. 26 hours of continuous use.
Indicators:
- CHECK Indicator:
- Lights up to indicate low battery or when the pedal is engaged, helping with battery management.
Connectors:
- INPUT Jack:
- 1/4-inch phone type for connecting your instrument (guitar or bass).
- OUTPUT Jack:
- 1/4-inch phone type for sending the compressed signal to your amplifier or other devices in your signal chain.
- DC IN Jack:
- For connecting an external power supply (PSA series AC adapter).
Accessories:
- Included:
- Leaflet with safety and usage instructions.
- 9V carbon-zinc battery (6F22).
- Optional (sold separately):
- AC Adaptor: PSA series.
Size and Weight:
- Width: 73 mm (2-7/8 inches).
- Depth: 129 mm (5-1/8 inches).
- Height: 59 mm (2-3/8 inches).
- Weight (including battery): 380 g (14 oz).
- Nominal Input Level: -20 dBu
-
BOSS DC-2W Dimension C
₹29,498.00Read moreSpecifications
- Modes:
- S (Standard)
- SDD-320
- Nominal Input Level: -20 dBu
- Input Impedance: 2.2 M ohms
Output Section:
- Nominal Output Level: -20 dBu
- Output Impedance: 1 k ohm
- Recommended Load Impedance: 10 k ohms or greater
Bypass:
- Buffered bypass
Controls:
- Pedal switch
- S/SDD-320 switch
- MODE SELECTOR [1]–[4] buttons
Indicators:
- CHECK indicator (Serves also as battery check indicator)
- MODE SELECTOR [1]–[4] indicators
Connectors:
- INPUT A (MONO) jack: 1/4-inch phone type
- INPUT B jack: 1/4-inch phone type
- OUTPUT A (MONO) jack: 1/4-inch phone type
- OUTPUT B jack: 1/4-inch phone type
- DC IN jack
Power Supply:
- Alkaline battery (9V, 6LR61)
- AC adaptor (PSA series: sold separately)
- Current Draw: 65 mA
- Expected battery life under continuous use:
- Alkaline: Approx. 6 hours
These figures will vary depending on the actual conditions of use.
- Alkaline: Approx. 6 hours
Accessories:
- Leaflet (“USING THE UNIT SAFELY,” “IMPORTANT NOTES,” and “Information”)
- Alkaline battery (9V, 6LR61)
Options (sold separately):
- AC adaptor: PSA series
Size and Weight:
- Width: 73 mm (2-7/8 inches)
- Depth: 129 mm (5-1/8 inches)
- Height: 59 mm (2-3/8 inches)
- Weight (including battery): 450 g (1 lb)
- Modes:
-
BOSS DD-8 DIGITAL DELAY EFFECTS PEDAL
Original price was: ₹17,761.00.₹16,000.00Current price is: ₹16,000.00.Add to cartSPECIFICATIONEffect Types: Transpose, Flanger, Phaser, Pan, Tremolo, Slicer, Bend, Chorus, Robot, Female, Male, Gt->Bass, Filter, Delay, Lo-Fi, Distortion
Rhythm Types: 83
USB Interface
- Hi-Speed USB (USB Mass Storage Class)
- Hi-Speed USB (USB-AUDIO)
Displays
- 7 segments, 2 characters (LED)
- 16 characters, 2 lines (backlit LCD)
Nominal Input Level
- INPUT MIC: -50 dBu (variable)
- INPUT INST: -10 dBu (variable)
- INPUT AUX: -20 dBu (variable)
Input Impedance
- INPUT MIC: 4 k ohms
- INPUT INST: 1 M ohm
- INPUT AUX: 47 k ohms
Nominal Output Level
- MAIN OUTPUT: -10 dBu
- SUB OUTPUT: -10 dBu
Output Impedance: 2 k ohms
Recommended Load Impedance: 10 k ohms or greater
Pedals
- TRACK 1 REC/DUB/PLAY pedal
- TRACK 2 REC/DUB/PLAY pedal
- TRACK 3 REC/DUB/PLAY pedal
- TRACK 1 STOP pedal
- TRACK 2 STOP pedal
- TRACK 3 STOP pedal
- ALL START/STOP pedal
- LOOP FX pedal
- EXP 1 pedal
Sliders
- TRACK 1 slider
- TRACK 2 slider
- TRACK 3 slider
Knobs
- MASTER LEVEL knob
- RHYTHM LEVEL knob
- AUX knob
- INST knob
- MIC knob
Connectors
- INPUT MIC jack: XLR type (balanced/phantom power: DC 48 V, 10 mA)
- INPUT INST jacks (L/MONO, R): 1/4″ phone type
- INPUT AUX jack: Stereo miniature phone type
- MAIN OUTPUT jacks (L/MONO, R): 1/4″ phone type
- SUB OUTPUT jacks (L/MONO, R): 1/4″ phone type
- PHONES jack: Stereo 1/4″ phone type
- CTL 1,2 / EXP 2 jack: 1/4″ TRS phone type
- CTL 3,4 / EXP 3 jack: 1/4″ TRS phone type
- USB connector
- MIDI connectors (IN/OUT/THRU) (*)
- DC IN jack (DC 9 V)
- (*) MIDI synchronization is possible with other RC-300 devices or when RC-300 is set to master.
Power Supply: DC 9 V (AC adaptor)
-
BOSS DM-2W Delay
₹21,608.00Add to cartSpecifications
- Nominal Input Level: -20 dBu
- Input Impedance: 1 M ohm
Output Section:
- Nominal Output Level: -20 dBu
- Output Impedance: 1 k ohm
- Recommended Load Impedance: 10 k ohms or greater
Delay Time:
- Standard Mode: 20 ms to 300 ms
- Custom Mode: 40 ms to 800 ms
Controls:
- Pedal switch
- REPEAT RATE knob
- INTENSITY knob
- ECHO knob
- Mode switch
Indicator:
- CHECK indicator (Serves also as battery check indicator)
Connectors:
- INPUT jack: 1/4-inch phone type
- OUTPUT jack: 1/4-inch phone type
- DIRECT OUT jack: 1/4-inch phone type
- RATE jack: 1/4-inch TRS phone type
- DC IN jack
Power Supply:
- Battery Options:
- Alkaline battery (9V, 6LR61)
- Carbon-zinc battery (9V, 6F22)
- AC Adaptor: PSA series (sold separately)
- Current Draw: 35 mA
- Expected battery life under continuous use:
- Alkaline: Approx. 15 hours
- Carbon: Approx. 5 hours
These figures will vary depending on the actual conditions of use.
Accessories:
- Leaflet (“USING THE UNIT SAFELY,” “IMPORTANT NOTES,” and “Information”)
- Alkaline battery (9V, 6LR61)
- Options (sold separately):
- AC adaptor: PSA series
- Expression pedal: Roland EV-5
Size and Weight:
- Width: 73 mm (2-7/8 inches)
- Depth: 129 mm (5-1/8 inches)
- Height: 59 mm (2-3/8 inches)
- Weight (including battery): 460 g (1 lb 1 oz)
-
BOSS DS-1W Distortion
₹17,503.00Add to cartSpecifications
- Nominal Input Level:
- -20 dBu
- Standard input level for instruments.
- Input Impedance:
- 1 M ohms
- High impedance, suitable for guitars and other high-impedance instruments.
- Nominal Output Level:
- -20 dBu
- Standard output level for the processed signal.
- Output Impedance:
- 1 k ohms
- Compatible with most amplifiers and other pedals.
- Recommended Load Impedance:
- 10 k ohms or greater
- Ensures optimal performance when connected to amplifiers or other devices.
Bypass
- Buffered Bypass:
- Preserves your instrument’s tone when the pedal is bypassed.
Controls
- Pedal Switch:
- Activates or deactivates the pedal.
- Mode Switch:
- Switches between different effect modes.
- DIST Knob:
- Controls the amount of distortion or fuzz.
- LEVEL Knob:
- Adjusts the output level of the effect.
- TONE Knob:
- Adjusts the tonal quality, focusing on high and low frequencies.
Indicators
- CHECK Indicator:
- Indicates the status of the battery, also serves as a battery check indicator.
Connectors
- INPUT Jack:
- 1/4-inch phone type
- For connecting your instrument (guitar, bass, etc.).
- OUTPUT Jack:
- 1/4-inch phone type
- For sending the processed signal to your amplifier or other pedals.
- DC IN Jack:
- For connecting an external power supply (PSA series AC adapter).
Power Supply
- Battery Options:
- Alkaline: 9V, 6LR61 or 6LF22
- Carbon-Zinc: 9V, 6F22
- AC Adaptor:
- PSA series (sold separately)
- Current Draw:
- 15 mA
- Low power consumption.
- Expected Battery Life:
- Alkaline: Approx. 50 hours of continuous use.
- Carbon: Approx. 25 hours of continuous use.
Accessories
- Included:
- Leaflet (“USING THE UNIT SAFELY,” “IMPORTANT NOTES,” and “Information”)
- Alkaline 9V battery (6LR61 or 6LF22).
- Optional (sold separately):
- AC Adaptor: PSA series
Size and Weight
- Width:
- 73 mm (2-7/8 inches)
- Depth:
- 129 mm (5-1/8 inches)
- Height:
- 59 mm (2-3/8 inches)
- Weight (including battery):
- 430 g (1 lb)
- Nominal Input Level:
Product Showcase
