Category
Filter by Price
Average Rating
Archives: Shop
Showing 145–156 of 1254 results
-
beyerdynamic Headphone Amplifier A20
₹25,000.00Add to cart- Frequency range / T.H.D. 10 Hz – 100 kHz (-1 dB) / 0.01 % at 170 mW / 250 Ω
- Maximum output power / Unweighted signal-to-noise ratio 170 mW / 250 Ω / > 100 dB (unweighted)
- Analog inputs / outputs 1 pair RCA / 1 pair RCA / Channel separation > 80 dB at 1 kHz / 250 Ω
- Headphone outputs 2 stereo jack outputs 6.35 mm (1/4″) in parallel mode
- No returns on sealed products if Seal is opened. Partial refund (may be around 30% to 50%) if returned product have signs of use / scratches / or packing is damaged. We sell such open box products @50% of street price. All charges will also be deducted.
-
beyerdynamic M 70 PRO X
₹16,500.00Original price was: ₹16,500.00.₹8,250.00Current price is: ₹8,250.00.Add to cartDynamic broadcast microphone for streaming and podcasting (Cardioid)- Perfect for streamers, podcasters and YouTubers
- Assertive, speech-optimised sound
- Masters challenging acoustic environments
- Optimum attenuation of popping sounds
- Shock mount and pop filter included
-
beyerdynamic USB Studio Microphone FOX
₹11,489.00Original price was: ₹11,489.00.₹6,000.00Current price is: ₹6,000.00.Add to cartUSB studio microphone (Cardioid)- 24 Bit 96 kHz studio grade quality as in professional recording studios
- Accurate signal conversion by a large diaphragm condensor capsule
- Headphone output with Zero Latency Monitoring and mute button for muting microphone
- Gain switch for recording voice or instruments
- Dimensions: 16 cm height and 5 cm diameter
-
BOSS AD-2 Acoustic Preamp
₹11,655.00Read moreSpecifications
- Nominal Input Level: -20 dBu
- Input Impedance: 10 M ohms
Output Section:
- Nominal Output Level:
- OUTPUT jack: -20 dBu
- LINE OUT jack: -20 dBu
- Output Impedance:
- OUTPUT jack: 1 k ohm
- LINE OUT jack: 600 ohms
- Recommended Load Impedance:
- OUTPUT jack: 10 k ohms or greater
- LINE OUT jack: 600 ohms or greater
Bypass:
- Buffered bypass
Controls:
- Pedal switch
- ACOUSTIC RESONANCE knob
- AMBIENCE knob
- NOTCH knob
Indicator:
- CHECK indicator (Serves also as battery check indicator)
Connectors:
- INPUT jack: 1/4-inch phone type
- OUTPUT jack: 1/4-inch phone type
- LINE OUT jack: 1/4-inch TRS phone type
- DC IN jack
Power Supply:
- Alkaline battery (9V, 6LR61)
- AC adaptor (sold separately)
- Current Draw: 65 mA
- Expected battery life under continuous use:
- Alkaline: Approx. 5 hours
These figures will vary depending on the actual conditions of use.
- Alkaline: Approx. 5 hours
Accessories:
- Leaflet (“USING THE UNIT SAFELY,” “IMPORTANT NOTES,” and “Information”)
- Alkaline battery (9V, 6LR61)
- Option (sold separately): AC adaptor (PSA series)
Size and Weight:
- Width: 73 mm (2-7/8 inches)
- Depth: 129 mm (5-1/8 inches)
- Height: 59 mm (2-3/8 inches)
- Weight (including battery): 420 g (15 oz)
-
BOSS Audio RC-300 Loop Station
₹76,963.00Original price was: ₹76,963.00.₹57,000.00Current price is: ₹57,000.00.Add to cart- Three stereo tracks with dedicated footswitches and controls for each
- Dedicated fader per track
- Expression pedal for effects control in real time
- Up to three hours of internal recording and 99 onboard memories
- 16 onboard effects optimized for looping
- XLR Microphone input with phantom power
- USB storage; import/export WAV files
-
BOSS Bass Effects Processor GT-1B
₹27,697.00Add to cartAudio Specifications:
- Sampling Frequency: 44.1 kHz
- AD Conversion: 24 bits + AF method
AF method (Adaptive Focus method) is a proprietary method from Roland & BOSS that vastly improves the signal-to-noise (SN) ratio of the AD and DA converters. - DA Conversion: 24 bits
- Effects: 90 types
- Patches: 99 (User) + 99 (Preset)
- Phrase Loop: 32 sec.
Input/Output:
- Nominal Input Level:
- INPUT: -10 dBu
- AUX IN: -20 dBu
- Maximum Input Level:
- INPUT: +7 dBu
- AUX IN: 0 dBu
- Input Impedance:
- INPUT: 1 M ohm
- AUX IN: 27 k ohms
- Nominal Output Level:
- OUTPUT (L/MONO, R): -10 dBu
- PHONES: -10 dBu
- Output Impedance:
- OUTPUT (L/MONO, R): 1 k ohm
- PHONES: 44 ohms
- Recommended Load Impedance:
- OUTPUT (L/MONO, R): 10 k ohms or greater
- PHONES: 44 ohms or greater
Controls and Display:
- Buttons:
- DOWN switch, UP switch, CTL1 switch
- EASY SELECT button, EASY EDIT button
- FX1/LIMITER button, OD/DS button
- PREAMP button, FX2/MOD button
- DELAY button, REVERB button
- MEMORY EDIT button, EXIT button, ENTER button, MENU button
- Knobs:
- 1 knob, 2 knob, 3 knob
- Expression Pedal: Supported (see options)
- Display:
- Graphic LCD (132 x 32 dots, backlit LCD)
Connectors:
- Input/Output Connectors:
- INPUT jack, OUTPUT (L/MONO, R) jacks: 1/4-inch phone type
- PHONES jack: Stereo miniature phone type
- Control and Expansion:
- CTL2, 3/EXP2 jack: 1/4-inch TRS phone type
- Auxiliary:
- AUX IN jack: Stereo miniature phone type
- USB Port:
- USB COMPUTER port: USB type B
- Power Input:
- DC IN jack
Power and Size:
- Power Supply:
- Alkaline battery (AA, LR6) x 4
- AC adaptor (sold separately)
- Current Draw: 200 mA
- Expected Battery Life under Continuous Use:
- Alkaline: Approx. 7 hours
Note: These figures will vary depending on actual conditions of use.
- Alkaline: Approx. 7 hours
- Size:
- Width: 305 mm (12-1/16 inches)
- Depth: 152 mm (6 inches)
- Height: 56 mm (2-1/4 inches)
- Maximum Height: 74 mm (2-15/16 inches)
- Weight:
- 1.3 kg (2 lbs 14 oz) including battery
Accessories and Options (Sold Separately):
- Accessories Included:
- Owner’s manual
- Leaflet “USING THE UNIT SAFELY”
- Alkaline battery (AA, LR6) x 4
- Options:
- AC Adaptor: PSA series
- Footswitches: FS-5U, FS-5L, FS-6, FS-7
- Expression Pedals: FV-500L, FV-500H, EV-30, Roland EV-5
-
BOSS Bass Multiple Effects ME-90B
₹42,934.00Add to cartAudio Specifications:
- Sampling Frequency: 48 kHz
- AD Conversion: 24 bits + AF method
AF method (Adaptive Focus method) is a proprietary method from Roland & BOSS that vastly improves the signal-to-noise (SN) ratio of the AD converters. - DA Conversion: 32 bits
- Processing: 32-bit floating point
- Effects: 93 Types
- Memories: 36 (User) + 36 (Preset)
- Phrase Loop: 38 sec. (MONO)
- Internal Tuning Detection Accuracy: ±0.1 cent
Input/Output:
- Nominal Input Level:
- INPUT: -10 dBu
- RETURN: -10 dBu
- Maximum Input Level:
- INPUT: +7 dBu
- RETURN: +7 dBu
- Input Impedance:
- INPUT: 1 M ohm
- RETURN: 1 M ohm
- Nominal Output Level:
- OUTPUT L/MONO, R: -10 dBu
- PHONES: -10 dBu
- SEND: -10 dBu
- BALANCED OUTPUT: -10 dBu
- Output Impedance:
- OUTPUT L/MONO, R: 1 k ohm
- PHONES: 44 ohms
- SEND: 1 k ohm
- BALANCED OUTPUT: 600 ohms
- Recommended Load Impedance:
- OUTPUT L/MONO, R: 10 k ohms or greater
- PHONES: 44 ohms or greater
- SEND: 10 k ohms or greater
- BALANCED OUTPUT: 600 ohms or greater
Controls and Display:
- Buttons:
- BANK▼/AMP/EQ switch, BANK▲/MOD switch, CTL/BLEND switch
- MEMORY/MANUAL switch, 1/COMP switch, 2/FILTER switch
- 3/DRV/SYN switch, 4/DLY/REV switch, PEDAL FX switch
- GND LIFT switch, AMP/LINE switch, POWER switch
- EXIT button, WRITE button, CTL button, EDIT button
- Knobs:
- PREAMP TYPE knob, BASS knob, MIDDLE knob, TREBLE knob, GAIN knob, LEVEL knob
- MOD TYPE knob, TYPE knob, RATE/TIME knob, DEPTH/DUTY/FB knob, E.LEV/RESO knob, BLEND knob
- COMP/FX1 TYPE knob, SUSTAIN/LOW/-1OCT knob, ATTACK/HIGH/-2OCT knob, LEVEL/DIRECT knob
- FILTER/FX2 TYPE knob, SENS/RATE/KEY knob, TONE/DEPTH/HRM knob, PEAK/LEVEL/RESO knob
- DRIVE/SYNTH TYPE knob, DRIVE knob, TONE knob, LEVEL knob
- DLY/REV TYPE knob, TIME knob, FEEDBACK/TONE knob, E.LEVEL knob, OUTPUT LEVEL knob, PEDAL FX TYPE knob
- Pedal:
- PEDAL FX pedal
- Display:
- 7 segments, 2 characters (LED)
- Tuning guides (LED)
Connectors:
- Input/Output Connectors:
- INPUT jack, OUTPUT (L/MONO, R) jacks, SEND jack, RETURN jack: 1/4-inch phone type
- BALANCED OUTPUT jack: XLR type
- PHONES jack: Stereo miniature phone type
- Control and Expansion:
- USB COMPUTER port: USB Type-C®
- Bluetooth® ADAPTOR connector: Dedicated connector
- DC IN jack
Power and Size:
- Power Supply:
- Alkaline battery (AA, LR6) x 4 or AC adaptor
- Current Draw: 195 mA
- Expected Battery Life Under Continuous Use:
- Alkaline battery: Approximately 6 hours
This can vary depending on the specifications of the batteries, capacity of the batteries, and the conditions of use.
- Alkaline battery: Approximately 6 hours
- Size:
- Width: 443 mm (17-1/2 inches)
- Depth: 220 mm (8-11/16 inches)
- Height: 67 mm (2-11/16 inches)
- Maximum Height: 93 mm (3-11/16 inches)
- Weight: 2.9 kg (6 lb 7 oz)
Accessories and Options (Sold Separately):
- Included Accessories:
- STARTUP GUIDE
- Alkaline battery (AA, LR6) x 4
- Leaflet “USING THE UNIT SAFELY”
- Options:
- AC adaptor: PSA-S series
- Bluetooth® Audio MIDI Dual Adaptor: BT-DUAL
- Carry Bag: CB-ME80, CB-BU10
-
BOSS BB-1X Bass Driver Effects Pedal
₹21,989.00Add to cartFeatures
- Bold, punchy sound that invigorates the original tone and responsiveness of your bass and amp
- Contains BOSS’ latest distortion, which adapts to every register and never muffles your low end
- Blend knob allows for mixing the direct signal with the effect signal
- Independent Low and High knobs for ultra-wide tonal adjustment
- Two output jacks: a normal output for a bass amp and a Line Out for a balanced connection directly to a PA or recorder
- The Line Out jack provides a modern and enhanced direct sound that brings out new characteristics in your tone
- The newest member of the special-edition X-series BOSS compact pedals, which offer premium looks, sound, and feel
- BOSS five-year warranty
-
BOSS BD-2W Blues Driver
₹19,256.00Add to cartSpecifications
- Nominal Input Level:
- -20 dBu
- Standard for guitar-level input signals.
- Input Impedance:
- 1 M ohm
- High impedance, ideal for guitars and other high-impedance instruments.
- Nominal Output Level:
- -20 dBu
- Standard output level for the processed signal.
- Output Impedance:
- 1 k ohm
- Compatible with most amplifiers and other pedals in your signal chain.
- Recommended Load Impedance:
- 10 k ohms or greater
- Ensures optimal performance when connected to amplifiers or other devices.
Bypass
- Buffered Bypass:
- Ensures that the guitar’s tone remains intact when the pedal is bypassed.
Controls
- Pedal Switch:
- Turns the pedal on or off.
- Mode Switch:
- Allows you to switch between different distortion modes for a range of tonal options.
- LEVEL Knob:
- Controls the output volume of the pedal.
- TONE Knob:
- Adjusts the overall tone, allowing you to make the sound brighter or darker.
- GAIN Knob:
- Adjusts the amount of distortion applied to the signal.
Power Supply
- Battery Options:
- Alkaline 9V battery (6LR61)
- Carbon-zinc 9V battery (6F22)
- AC Adaptor:
- PSA series (sold separately)
- Current Draw:
- 18 mA — Low power consumption for extended use.
- Expected Battery Life:
- Carbon-zinc: Approx. 20 hours of continuous use.
- Alkaline: Approx. 35 hours of continuous use.
Indicators
- CHECK Indicator:
- Serves as both the pedal status indicator and battery check light, ensuring you are aware of the pedal’s operational status.
Connectors
- INPUT Jack:
- For connecting your instrument (guitar, bass, etc.).
- OUTPUT Jack:
- For sending the processed signal to your amplifier or other pedals.
- DC IN Jack:
- For connecting to an external power supply (PSA series AC adapter).
Accessories
- Included:
- Leaflet with safety instructions and usage guidelines.
- Carbon-zinc 9V battery (6F22).
- Optional (sold separately):
- AC Adaptor: PSA series.
Size and Weight
- Width:
- 73 mm (2-7/8 inches)
- Depth:
- 129 mm (5-1/8 inches)
- Height:
- 59 mm (2-3/8 inches)
- Weight (including battery):
- 430 g (1 lb)
- Nominal Input Level:
-
BOSS BF-3 Flanger
₹18,484.00Add to cartSpecifications
- Nominal Input Level:
- -20 dBu
- Input Impedance:
- 1 M ohm
- Nominal Output Level:
- -20 dBu
- Output Impedance:
- 1 k ohm
- Recommended Load Impedance:
- 10 k ohms or greater
- Bypass:
- Buffered bypass
Controls
- MODE Knob:
- Adjusts the effect mode.
- RATE Knob:
- Adjusts the rate of modulation.
- DEPTH Knob:
- Controls the intensity of the effect.
- RES (Resonance)/MANUAL Knob:
- Adjusts resonance or manual control, depending on the mode.
- Pedal Switch:
- Activates or deactivates the effect.
Indicators
- CHECK Indicator:
- Used for indicating battery status.
Connectors
- GUITAR IN Jack:
- 1/4-inch phone type
- For guitar input.
- BASS IN Jack:
- 1/4-inch phone type
- For bass input.
- OUTPUT A (MONO) Jack:
- 1/4-inch phone type
- For mono output.
- OUTPUT B Jack:
- 1/4-inch phone type
- For stereo output.
- DC IN Jack:
- For connecting an external power supply.
Power Supply
- Battery Options:
- Alkaline: 9V, 6LR61
- AC Adaptor:
- PSA series (sold separately)
- Current Draw:
- 60 mA
- Expected Battery Life (under continuous use):
- Alkaline: Approx. 4 hours
- Note: These figures may vary depending on actual usage conditions.
Accessories
- Included:
- Leaflet (“USING THE UNIT SAFELY,” “IMPORTANT NOTES,” and “Information”)
- Registration Card
- Alkaline 9V Battery (6LR61)
- Optional (sold separately):
- AC Adaptor: PSA series
Size and Weight
- Width:
- 73 mm (2-7/8 inches)
- Depth:
- 129 mm (5-1/8 inches)
- Height:
- 59 mm (2-3/8 inches)
- Weight (including battery):
- 425 g (15 oz)
- Nominal Input Level:
-
BOSS BP-1W Booster/Preamp
₹20,727.00Read moreHere is the information you provided, organized clearly without removing any words:
Specifications
- Nominal Input Level: -20 dBu
- Input Impedance: 1 M ohm
Output Section:
- Nominal Output Level: -20 dBu
- Output Impedance: 1 k ohm
- Recommended Load Impedance: 10 k ohms or greater
Bypass:
- Buffered bypass
Controls:
- Pedal switch
- Mode switch
- DIST. knob
- COLOR MIX H knob
- COLOR MIX L knob
- LEVEL knob
Indicator:
- CHECK indicator (Used for indication of check battery)
Connectors:
- INPUT jack: 1/4-inch phone type
- OUTPUT jack: 1/4-inch phone type
- DC IN jack
Power Supply:
- Battery Options:
- Alkaline battery (9V, 6LR61 or 6LF22)
- Carbon-zinc battery (9V, 6F22)
- AC Adaptor: PSA series (sold separately)
- Current Draw: 30 mA
- Expected battery life under continuous use:
- Alkaline: Approx. 24 hours
- Carbon: Approx. 8 hours
These figures will vary depending on the actual conditions of use.
Accessories:
- Leaflet “USING THE UNIT SAFELY”
- Alkaline battery (9V, 6LR61 or 6LF22)
- Option (sold separately): AC adaptor: PSA series
Size and Weight:
- Width: 73 mm (2-7/8 inches)
- Depth: 129 mm (5-1/8 inches)
- Height: 59 mm (2-3/8 inches)
- Weight (including battery): 440 g (1 lb)
-
BOSS CE-2W Chorus Waza Craft Special Edition
₹25,793.00Read moreSpecifications
- Modes:
3 modes- Standard
- CE-1 Chorus
- CE-1 Vibrato
- Nominal Input Level: -20 dBu
- Input Impedance: 1 M ohm
Output Section:
- Nominal Output Level: -20 dBu
- Output Impedance: 1 k ohm
- Recommended Load Impedance: 10 k ohms or greater
Bypass:
- Buffered bypass
Controls:
- Pedal switch
- Standard/CE-1 Mode switch
- RATE knob
- DEPTH knob
Indicator:
- CHECK indicator (Serves also as battery check indicator)
Connectors:
- INPUT jack: 1/4-inch phone type
- OUTPUT A (MONO) jack: 1/4-inch phone type
- OUTPUT B jack: 1/4-inch phone type
- DC IN jack
Power Supply:
- Alkaline battery (9V, 6LR61) or Carbon-zinc battery (9V, 6F22)
- AC adaptor (sold separately)
- Current Draw: 25 mA
- Expected battery life under continuous use:
- Alkaline: Approx. 32 hours
- Carbon: Approx. 18 hours
These figures will vary depending on the actual conditions of use.
Accessories:
- Leaflet (“USING THE UNIT SAFELY,” “IMPORTANT NOTES,” and “Information”)
- Alkaline battery (9V, 6LR61)
Options (sold separately):
- AC adaptor: PSA series
Size and Weight:
- Width: 73 mm (2-7/8 inches)
- Depth: 129 mm (5-1/8 inches)
- Height: 59 mm (2-3/8 inches)
- Weight (including battery): 450 g (1 lb)
- Modes: