Yamaha TF3 24 Channel Digital Mixer
Original price was: ₹310,000.00.₹248,000.00Current price is: ₹248,000.00.
Ample input capacity and hands-on control in a compact console that can handle a wide range of applications.
- 25 motor faders (24 channels + 1 master)
- 48 input mixing channels (40 mono + 2 stereo + 2 return)
- 20 Aux (8 mono + 6 stereo) + Stereo + Sub buses
- 8 DCA groups with Roll-out
- 24 analog XLR/TRS combo mic/line inputs + 2 analog RCA pin stereo line inputs
- 16 analog XLR outputs
- 34 x 34 digital record/playback channels via USB 2.0 + 2 x 2 via a USB storage device
- 8 Effects and 10 GEQ
- 1 expansion slot for NY64-D audio interface card
You must be logged in to post a review.
Related products
-
Yamaha MG10X CV Mixing Console
Original price was: ₹20,500.00.₹18,000.00Current price is: ₹18,000.00.Add to cartMixing capability On-board processors SPX algorithm: 24 programs, PARAMETER control:1, FOOT SW:1 (FX RTN CH on/off) I/O Phantom power +48 V Digital I/O – Input Channels Mono[MIC/LINE] 4 Mono/Stereo[MIC/LINE] – Stereo[LINE] 3 Output Channels STEREO OUT 2 MONITOR OUT 1 PHONES 1 AUX SEND 1 GROUP OUT – Bus Stereo: 1, AUX[FX]: 1 Input Channel Function PAD 26 dB (Mono) HPF 80 Hz, 12 dB/oct (Mono) COMP 1-knob compressor Threshold: +22 dBu to -8 dBu, Ratio: 1:1 to 4:1, Output level: 0 dB to 7 dB, Attack time: approx. 25 msec, Release time: approx. 300 msec EQ HIGH Gain: +15 dB/-15 dB, Frequency: 10 kHz shelving EQ MID Gain: +15 dB/-15 dB, Frequency: 2.5kHz peaking EQ LOW Gain: +15 dB/-15 dB, Frequency: 100 Hz shelving PEAK LED LED turns on when post EQ signal reaches 3 dB below clipping Level Meter 2 x 7 -segment LED meter [PEAK, +10, +6, 0, -6, -10, -20 dB] Total harmonic distortion 0.02 % @ +14dBu (20 Hz to 20kHz), GAIN knob: Min, 0.003 % @ +24dBu (1kHz), GAIN knob: Min Frequency response +0.5 dB/-1.0 dB (20 Hz to 48 kHz) , refer to the nominal output level @ 1 kHz, GAIN knob: Min Hum & noise level Equivalent input noise -128 dBu (Mono Input Channel, Rs: 150Ω, GAIN knob: Max) Residual output noise -102 dBu (STEREO OUT, STEREO LEVEL knob: Min) Crosstalk -83 dB Power requirements PA-10 (AC 38 VCT, 0.62A, Cable length = 3.6 m) or equivalent recommended by Yamaha Power consumption 22.9 W Dimensions W 244 mm (9.6″) H 71 mm (2.8″) D 294 mm (11.6″) Net weight 2.1 kg (4.63 lbs.) Accessories Included Accessory: AC Adaptor, Owner’s Manual, Technical Specifications, Optional Accessory: Mic Stand Adaptor BMS-10A, Foot Switch FC5 Others Operating Temperature: 0 to +40˚C -
Lewitt DTP 340 REX
Original price was: ₹18,300.00.₹16,490.00Current price is: ₹16,490.00.Read moreFeatures:
- Switchable “Enhanced Frequency Response” specifically tailored for a powerful kick drum sound
- Perfectly suited for recording bass instruments and percussion
- Uniform cardioid pickup pattern for maximum isolation of the main sound source
- Outstanding gain before feedback
- Rock-solid full metal die-cast body suited for rough daily touring routine
- Integrated stand adapter for secure mounting and easy positioning
- Corrosion-resistant gold-plated 3-pin XLR output connector
- Comes in a cardboard box with foam layers and DTP 40 Lb artificial leather bag
-
Roland MC-101 GROOVEBOX
₹65,365.00Add to cartSpecificationsSound GeneratorZEN-Core (Tone, Drum Kit)Track TypeTone, Drum Kit, Looper (Audio Loop)Maximum PolyphonyZEN-Core: 128 voices (varies according to the sound generator load)
LOOPER: 4 (varies according to the available number of Looper track)Tracks4 tracksClips64 clips (16 clips per track)* Clip Type: Tone, Drum Kit, Looper (Audio Loop), it varies according to the track type.TonesPreset Tone: 3,000 or greater
Preset Drum Kit: 80 or greater
User Sample (as a Tone or Drum Kit): available by importing form SD CARD
Looper Sample (as a clip of Looper track): available by importing from SD CARD* Available total time for User Sample: 12 minutes in mono, 6 minutes in stereo (44.1 kHz)
* Available format of User Sample: WAV 32–96 kHz/16 bits, 24 bits (mono, stereo)* Available total time for Looper Sample: Approx. 60 sec (44.1 kHz)
* Available format of Looper Sample: WAV 44.1 kHz/16 bits, 24 bits, 32 bits, 32 bits float (mono, stereo)EffectsTrack Multi-Effects: 90 types
Track EQ
Chorus/Delay: 9 types
Reverb: 7 types
Master Effects: 90 types
Master Compressor
Master EQStep SequencerMaximum Step: 128 steps* Available on a Tone or Drum Kit TrackLooperTime Stretch, Pitch Shift
* Available on a Looper TrackDisplay16 characters, 2 lines LCD (with backlit)External StorageSD Card (SDHC supported) for saving Project Data and Audio DataConnectorsPHONES jack: Stereo miniature phone type
OUT(L/MONO, R) jacks: 1/4-inch phone type
MIDI (IN, OUT) connectors
USB port: USB B type (Audio, MIDI)Power SupplyAlkaline battery (AA, LR6) x 4
Ni-MH battery (AA, HR6) x 4
Obtained via USB port (USB bus power)Current Draw500 mAExpected battery life under continuous useAlkaline battery (AA, LR6): Approx. 3 hours
Ni-MH battery (AA, HR6): Approx. 4.5 hours* This can vary depending on the specifications of the batteries, capacity of the batteries, and the conditions of use.AccessoriesOwner’s manual
Alkaline battery (AA, LR6) x 4
SD Card (installed in the product when shipped from the factory)
SD Card Protector (installed in the product when shipped from the factory)Size and WeightWidth224 mm
8-13/16 inchesDepth132 mm
5-3/16 inchesHeight61 mm
2-7/16 inchesWeight (including batteries)716 g
1 lb 9 oz -
Roland VT-4 Voice Transformer
₹28,614.00Add to cartInput and Output Levels:
- Nominal Input Level:
- MIC IN: -40 to -12 dBu (variable)
- Input Impedance:
- MIC IN (Rear): 4.4 k ohms
- MIC IN (Front): 2.2 k ohms
- Nominal Output Level:
- LINE OUT: -10 dBu
- Output Impedance:
- LINE OUT: 1 k ohm
- PHONES: 24 ohms
Memory:
- Scene Memory: 8
Effect Types:
- ROBOT:
- [1] NORMAL
- [2] OCTAVE-1
- [3] OCTAVE+1
- [4] FEEDBACK
- MEGAPHONE:
- [1] MEGAPHONE
- [2] RADIO
- [3] BBD CHORUS
- [4] STROBO
- VOCODER:
- [1] ADVANCED
- [2] VP
- [3] TALK BOX
- [4] SPELL TOY
- HARMONY:
- [1] +5
- [2] +3
- [3] +3, -4
- [4] +3, +5
- REVERB:
- [1] REVERB
- [2] ECHO
- [3] TEMPO DELAY
- [4] DUB ECHO
Connectors:
- MIC IN Jack (Rear): Combo type (XLR, 1/4-inch TRS phone), balanced (phantom power: +48 V, 10 mA Max.)
- MIC IN Jack (Front): Stereo miniature phone type (plug-in power)
- PHONES Jack: Stereo miniature phone type
- LINE OUT Jacks (L/MONO, R/BYPASS): 1/4-inch phone type
- USB Port: USB type B
- MIDI IN Jack: USB audio signal processing
Signal Processing:
- PC Interface: 24 bits
- AD/DA Conversion: 24 bits
- Sampling Frequency: 44.1 kHz, 48 kHz, 96 kHz, 192 kHz
MIDI Power Supply:
- Rechargeable Ni-MH Battery (AA, HR6) x 4
- Alkaline Battery (AA, LR6) x 4
- Obtained via USB Port (USB Bus Power)
Current Draw:
- 500 mA
Battery Life (Continuous Use):
- Alkaline Battery (Phantom Power: Off): Approx. 6 hours
- Alkaline Battery (Phantom Power: On): Approx. 4 hours
- Rechargeable Ni-MH Battery (Phantom Power: Off): Approx. 7 hours
- Rechargeable Ni-MH Battery (Phantom Power: On): Approx. 5.5 hours
Battery life may vary depending on battery specifications, capacity, and usage conditions.
Dimensions:
- Width: 174 mm (6-7/8 inches)
- Depth: 133 mm (5-1/4 inches)
- Height: 58 mm (2-5/16 inches)
Weight:
- Weight (Including Batteries): 554 g (1 lb 4 oz)
Accessories:
- Included:
- Owner’s Manual
- Leaflet “USING THE UNIT SAFELY”
- Alkaline Battery (AA, LR6) x 4
- Nominal Input Level:
Product Showcase
Reviews
There are no reviews yet.