Product Showcase
Sale!
Yamaha DHR15 Loudspeaker
Original price was: ₹72,200.00.₹60,000.00Current price is: ₹60,000.00.
| DHR15 | ||
|---|---|---|
| Frequency range (-10dB) | 44 Hz – 20 kHz | |
| Coverage area | H90ﾟ x V60ﾟ | |
| Crossover | 1.8 kHz: FIR-X tuning™ (linear phase FIR filter) | |
| Maximum Output Level (Measured peak, IEC noise@1m) | 131 dB SPL | |
| Components | LF | Diameter: 15″ cone, Voice Coil: 2.5″, Magnet: Ferrite |
| HF | Diaphragm: 1.4″, Type: 1″ throat compression driver, Magnet: Ferrite | |
| Amplifier class | Class-D | |
| Power rating | Dynamic | 1,000 W (LF: 800 W, HF: 200 W) *1 |
| Continuous | 465 W (LF: 400 W, HF: 65 W) | |
| Cooling | Fan cooling, 4 speeds | |
| Power consumption | 74 W (1/8power), 18 W (Idle) | |
| Power requirements | 100 V, 100-120 V, 220-240 V, 110/127/220 V (Brazil), 50/60 Hz | |
| A/D D/A Converters | 24 bit 48 kHz Sampling | |
| Processors | HPF: OFF, 100 Hz, 120 Hz, 24 dB/Oct.; D-CONTOUR: FOH/MAIN, MONITOR, OFF | |
| I/O connectors | INPUT1: Combo x1, INPUT2: Combo x 1 + RCA pin x 2 (Unbalanced), OUTPUT: XLR3-32 x 1 (CH1 Parallel Through or CH1+CH2 Mix) | |
| Cabinet material | Plywood | |
| Finish | Durable Polyurea Painting, Black | |
| Handle | Side x2 | |
| Pole socket | Φ35 mm x2 (Bottom, 0° or -7°) | |
| Rigging | Top x 2, Rear x 1 (Fit for M10 x 30 – 50 mm Eyebolts) | |
| Floor Monitor Angle | – | |
| Dimensions | W | 432 mm (17.0″) |
| H | 692 mm (27.2″) (with rubber feet) | |
| D | 405 mm (15.9″) | |
| Net weight | 24.0 kg (52.9 lbs) | |
| Options | – | |
- Featuring a plywood cabinet that delivers a clear sound with minimal vibration.
- Plywood enclosure with a polyurea coating for a robust, scratch resistant surface.
- Compact size despite the 15-inch LF driver that provides excellent low frequency response.
- Dual-angle pole sockets offer both 0° or a -7° down tilt.
- Rigging points for use with eye bolts.
- Propitiatory FIR-X„ tuning, provides FIR filtering and corrective EQ, minimizing phase distortion.
You must be logged in to post a review.
Related products
-
Alto Professional TX310
Original price was: ₹41,980.00.₹22,100.00Current price is: ₹22,100.00.Add to cartKey features
- 350 Watts peak, (175 Watts continuous Class D power)
- The 90 H x 60 V horn delivers greater coverage
- The full grille delivers style and provides protection for your investment.
- 10-inch (254 mm) LF driver, 1.5-inch (38.1 mm) voice coil
- 1-inch (25.4 mm) titanium diaphragm HF compression driver
- Lightweight, portable design for main or wedge monitor operation
- Standard speaker pole socket
- Bi-amplified design with precision active crossover and EQ
- Balanced XLR Mic/Line input, Link Output and Volume control
- Integrated analog limiter and overload protection circuitry
- Designed and tuned in the USA
-
Focal SUB 12 ST6 (Each)
Original price was: ₹401,800.00.₹380,000.00Current price is: ₹380,000.00.Read moreKey points
• Composite sandwich ‘W’-cone: sound neutrality, no distortion
• Large laminar port: no port noises or distortion
• Automatic disengageable stand-by mode
• Amplification: 600W RMS, 1000W peak
• Carry handle
-
Alto Professional TX315
Original price was: ₹63,980.00.₹33,590.00Current price is: ₹33,590.00.Add to cartKey features
- 700 Watts peak (350 Watts continuous) Class D power
- The 90 H x 60 V horn delivers greater coverage
- The full grille delivers style and provides protection for your investment.
- 15-inch (381 mm) LF driver, 2-inch (51 mm) voice coil
- 1-inch (25.4 mm) titanium HF compression driver
- Lightweight, portable design for main or wedge monitor operation
- Standard speaker pole socket
- Bi-amplified design with precision active crossover and EQ
- Balanced XLR Mic/Line input, Link Output and Volume control
- Integrated analog limiter and overload protection circuitry
- Contour switch with low- and high-frequency +3dB boost
- Ground-lift switch removes unwanted hum or buzz
- Designed and tuned in the USA
-
Alto Professional TS12S
Original price was: ₹117,980.00.₹61,950.00Current price is: ₹61,950.00.Add to cartKey features
- 2500W peak power output
- High-efficiency Class D amplifier
- Transducer: 15-inch driver with 3-inch high-temperature voice coil
- (2) XLR+1/4-inch combo inputs + (2) balanced XLR line outputs
- (2) XLR thru outputs for linking
- User-selectable EQ tunings (Off, Live, DJ)
- Phase Alignment selector switch (0°/90°/180°/270°)
- Rugged, internally-braced front-ported MDF cabinet with integrated 36 mm pole socket
- Mark-resistant splatter-spray finish always looks good, even with heavy use
- Electronic clip, thermal and transducer overdrive protection
- Designed and tuned in the USA
Reviews
There are no reviews yet.