Product Showcase
Sale!
| DBR10 | ||||
|---|---|---|---|---|
| Speaker type | 2-way, Bi-amp powered speaker, Bass-reflex type | |||
| Frequency range (-10dB) | 55Hz – 20kHz | |||
| Nominal coverage | H | 90° | ||
| V | 60° | |||
| Components | LF | Diameter:10″ cone, Voice Coil:2″, Magnet:Ferrite | ||
| HF | Diaphragm:1″, Type: 1″ throat compression driver, Magnet:Ferrite | |||
| Crossover | 2.1kHz: FIR-X tuning™ (linear phase FIR filter) | |||
| Output power | Dynamic:700 W (LF: 500 W, HF: 200 W) / Continuous: 325 W (LF: 260 W, HF: 65 W) | |||
| Maximum output level (1m; on axis) | 129dB SPL | |||
| I/O connectors | INPUT1: Combo x1, INPUT2: Combo x 1 + RCA pin x 2 (Unbalanced), OUTPUT: XLR3-32 x 1 (CH1 Parallel Through or CH1+CH2 Mix) | |||
| Processors | D-CONTOUR: FOH/MAIN, MONITOR, OFF | |||
| Heat dissipation | Fan cooling, 4 speeds | |||
| Power requirements | 100 V, 100-120V, 220-240 V, 110/127/220V (Brazil), 50/60Hz | |||
| Power consumption | 60W(1/8 Power Consumption), 18W(Idle) | |||
| Cabinet material | Plastic | |||
| Finish | Black | |||
| Handle | Top x 1 | |||
| Flying and mounting hardware | Bottom x 2 (Fit for M8 x 15 mm eyebolts) | |||
| Pole socket | 35mm (Bottom x 1) | |||
| Dimensions | W | 308mm (12.1″) | ||
| H | 493mm (19.4″) | |||
| D | 289mm (11.4″) | |||
| Net weight | 10.5 kg (23.2 lbs) | |||
You must be logged in to post a review.
Related products
-
Alto Professional TX312
Original price was: ₹57,980.00.₹30,450.00Current price is: ₹30,450.00.Add to cartKey features
- 700 Watts peak (350 Watts continuous) Class D power
- The 90 H x 60 V horn delivers greater coverage
- The full grille delivers style and provides protection for your investment.
- 12-inch (305 mm) LF driver, 2-inch (51 mm) voice coil
- 1-inch (25.4 mm) titanium HF compression driver
- Lightweight, portable design for main or wedge monitor operation
- Standard speaker pole socket
- Bi-amplified design with precision active crossover and EQ
- Balanced XLR Mic/Line input, Link Output and Volume control
- Integrated analog limiter and overload protection circuitry
- Contour switch with low- and high-frequency +3dB boost
- Ground-lift switch removes unwanted hum or buzz
- Designed and tuned in the USA
-
Alto Professional TS18S
Original price was: ₹151,980.00.₹79,790.00Current price is: ₹79,790.00.Add to cartKey features
- 2500W peak power output
- High-efficiency Class D amplifier
- Transducer: 18-inch driver with 3-inch high-temperature voice coil
- (2) XLR+1/4-inch combo inputs + (2) balanced XLR line outputs
- (2) XLR thru outputs for linking
- User-selectable EQ tunings (Off, Live, DJ)
- Phase Alignment selector switch (0°/90°/180°/270°)
- Rugged, internally-braced front-ported MDF cabinet with integrated 36 mm pole socket
- Mark-resistant splatter-spray finish always looks good, even with heavy use
- Electronic clip, thermal and transducer overdrive protection
- Designed and tuned in the USA
-
Dynaudio Core Sub
Original price was: ₹595,990.00.₹535,990.00Current price is: ₹535,990.00.Add to cart- Unique 4 x 9″ studio subwoofer delivers deep yet ultra-precise low frequencies
- MSP+ (Magnesium Silicate Polymer) Hybrid Drive speakers feature lightweight aluminum construction for extremely low distortion
- Extremely accurate all the way down to 13.5Hz, well below the threshold of human hearing
- Highly efficient 1000W amplifier provides massive headroom
- Analog and AES3 digital inputs let you keep your signal digital right to the end
- 24-bit sampling rate and 192kHz resolution; dependent on input signal
- Core DSP optimizes imaging, balance, and bass extension
- All drivers handcrafted by Dynaudio in Denmark
-
PROEL SESSION1
Original price was: ₹36,215.00.₹34,404.00Current price is: ₹34,404.00.Add to cartMIXER Section MONO inputs 2 x MIC/LINE IN (XLR-F + 1.4″ JACK) STEREO input 1 x LINE IN (MINI-JACK) Outputs LINE OUT (XLR-M) Main EQ SUB LEVEL (SPEECH-MUSIC-BOOST) Internal Effect ECHO-DELAY MULTIMEDIA Section Player Type USB / SD / WIRELESS AUDIO player with TWS Compatible File Formats MP3 Control Interface LCD display, CONTROL buttons AMPLIFIER Section Total Peak Power 400 W Continuous Power 200 W Amplifier Type Class D Power Supply SMPS Processing Analog LOUDSPEAKER Section System Type Compact powered column system with subwoofer High Frequency Device 4 x 2.5″ (66mm) drivers Low Frequency Device 8” (200mm) woofer with 1.5” VC Angular Coverage 90° H x 60° V Frequency Response 50Hz – 18kHz Maximum SPL Output 108 dB GENERAL Specifications Construction Polypropylene Cabinet Colour Black Column system 3-pcs with fast-linking system and integral power connections Handles 1 x subwoofer top Accessories Padded bag for 3-pcs column Dimensions (WxHxD) SUB: 318x 400 x484.5 mm
COLUMN (each piece): 520 X 84 X 97.5 mmWeight 14 Kg (complete system) Power Supply 100 V-240 V~ 50/60 Hz Rated Power Consumption 100 W
Reviews
There are no reviews yet.