Product Showcase
RODE NTG3 Broadcast Shotgun Microphone
₹80,350.00
|
Specification |
Details |
|---|---|
|
Acoustic Principle |
Line Gradient |
|
Active Electronics |
RF Bias |
|
Capsule Size |
0.50” (½ inch) |
|
Polar Pattern |
Supercardioid |
|
Address Type |
End |
|
Frequency Range |
40Hz – 20kHz |
|
Output Impedance |
25Ω |
|
Maximum SPL |
130dB SPL |
|
Maximum Output Level |
8.2mV (@ 1kHz, 1% THD into 1KΩ load) |
|
Sensitivity |
-30.0dB re 1V/Pa (31.60mV @ 94 dB SPL) ±2 dB @ 1kHz |
|
Equivalent Noise Level (A-Weighted) |
13dBA |
|
Power Requirements |
P48 (48V Phantom Power) |
The NTG3 is a broadcast-grade shotgun microphone designed for the most demanding shoots that require high-resolution broadcast audio. It features RF-bias technology that yields superior resistance to moisture and condensation, making it suitable for outdoor shoots in adverse conditions. The NTG3 has a rich, warm sound and a tightly controlled polar pattern with exceptional off-axis performance with no coloration. It is also highly regarded for voice-over work, where its natural tone and punch deliver exceptional performance for a wide range of voice types.
- Broadcast-grade RF-bias shotgun microphone
- Highly resistant to moisture and condensation
- Tightly controlled directional pick-up without off-axis coloration
- Available in satin-nickel or matte black finish
You must be logged in to post a review.
Related products
-
Sontronics Drum Pack
Original price was: ₹85,615.00.₹83,000.00Current price is: ₹83,000.00.Add to cart-
Polar pattern (all mics): Cardioid
-
Pad: 0/-15dB (DM-1B), 0/-10dB (DM-1S, DM-1T & STC-10)
-
Filter (STC-10 only): Linear/75Hz
-
Freq. response: 20Hz – 20kHz (DM-1B), 30Hz – 20kHz (DM-1S & 1T, STC-10)
-
Sensitivity: 6mV/Pa -45dB ±2dB (DM-1B),
-
8mV/Pa -42dB ±2dB (DM-1S & 1T),
-
11mV/Pa -39dB ±2dB (STC-10)
-
Impedance (all mics): ≤200 Ohms
-
Equivalent noise level (A-weighted): 14dB (DM-1B, 1S & 1T), 18dB (STC-10)
-
Max. SPL*: 155dB (DM-1B), 135dB (DM-1S & 1T), 130dB (STC-10)
-
Power sources (all mics): 48V ±4V phantom power required
-
Connector (all mics): 3-pin XLR
-
Dimensions: 144 x 72 x 72mm (DM-1B),
-
91 x 22 x 22mm (DM-1S & 1T),
-
150 x 21 x 21mm (STC-10)
-
Weight: 829g (DM-1B), 86g (DM-1S & 1T), 125g (STC-10)
-
-
Lauten Audio LA-220 V2
Original price was: ₹50,765.00.₹48,000.00Current price is: ₹48,000.00.Add to cartLA-220 CLASSIC OR CLEAN FET MIC SOUND AT THE FLIP OF A SWITCH VOCALS // DRUMS // ACOUSTIC GUITAR // ELECTRIC GUITAR STUDIO SOUND IN REAL-WORLD SPACES The LA-220 is a two-tone FET microphone that allows you to choose between the warmth of a classic microphone and the clarity of a modern microphone at the …
-
Sontronics APOLLO 2
Original price was: ₹275,470.00.₹268,000.00Current price is: ₹268,000.00.Add to cart- Frequency response: 20Hz – 18kHz
- Sensitivity: 18mV/Pa -33dB ±1dB (0dB = 1V/Pa @ 1,000Hz)
- Polar pattern: Figure-of-eight (x2)
- Impedance: ≤150 Ohms
- Equivalent noise level: 10dB (A-weighted)
- Max SPL (for 0.5% THD @ 1kHz): 125dB
- Power: Phantom power 48V required
- Connector: 8-pin connector to two 3-pin XLR Neutrik connectors (cable supplied)
- Dimensions: 260 x 65 x 65mm
- Weight: 744g (1247g with shockmount)
- Comes with: stereo to two XLR connector cable, shockmount, aluminium flightcase
-
Sontronics MERCURY
Original price was: ₹220,355.00.₹215,000.00Current price is: ₹215,000.00.Add to cart- Polar pattern: Sweepable from omni to figure-of-eight & everything in between
- Frequency response: 20Hz – 20kHz
- Pad: 0, -10dB
- Filter: Linear, 75Hz
- Sensitivity: 18mV/Pa -33dB ±1.5dB (0dB = 1V/Pa @ 1,000Hz)
- Impedance: ≤200 Ohms
- Equivalent noise level: <12dB (A-weighted)
- Max SPL (for 0.5% THD @ 1kHz): 125dB
- Power: 115/230V *phantom power NOT required*
- Connector: 8-pin connector (mic),
- 3-pin XLR-M (power supply)
- Dimensions: 250 x 90 x 80mm
- Weight: 2317g (mic only)
- Comes with: wooden box (for Mercury mic), shockmount, cables, power supply, aluminium flightcase
Reviews
There are no reviews yet.