PreSonus Eris Sub8
₹27,600.00 Original price was: ₹27,600.00.₹24,990.00Current price is: ₹24,990.00.
Features:
● 8-inch, front-firing, paper-composite low-frequency transducer with high-elastisity rubber surround
● Class AB amplifier: 100W peak (50W RMS) power
● Input gain control (-30 dB to +6 dB, continuously variable)
● Continuously variable lowpass filter (50 Hz to 130 Hz)
● Defeatable highpass filter removes frequency content below 80 Hz from the full-range signal sent from the Eris Sub8 outputs to the main speakers
● Left and right, balanced ¼-inch TRS and unbalanced RCA main inputs
● Left and right balanced ¼-inch TRS and unbalanced RCA pass-through outputs for connecting satellite speakers
● Polarity invert switch
● Protection: RF interference, Output-current limiting, Over-temperature, Turn-on/off transient, Subsonic filter, External mains fuse
The single best subwoofer you can get to put a little boom in your room, the Eris Sub8 is the first subwoofer to join the lauded and best-selling Eris studio monitor line. We called it Eris because it’s been designed from the ground up to be part of the family; it compliments the voicing and frequency response of the modern Eris classics.. The surprisingly loud 100-Watt Eris Sub8 drops down to a molar-rattling 30Hz, allowing you to both rock harder and produce better mixes, as you’ll be hearing an accurate representation of your work. Thanks to robust configuration and I/O, you’ll be able to tailor your Eris Sub8 configuration exactly to your mixing and listening needs. You can connect your existing monitors via ¼” TRS or RCA, set the input level to your liking, and even invert the polarity. Most importantly, you get a High Pass Filter and a Low Pass Crossover control that ensures your Sub8 starts working at the precise low-frequency point where your main monitors stop working. This makes sure you avoid the flubbery, smudged, low-end mess that one hears in redundant, duplicate, redundant bass reproduction that occurs without a crossover.
You must be logged in to post a review.
Related products
-
Alto Professional TS18S
₹151,980.00Original price was: ₹151,980.00.₹79,790.00Current price is: ₹79,790.00.Add to cartKey features
- 2500W peak power output
- High-efficiency Class D amplifier
- Transducer: 18-inch driver with 3-inch high-temperature voice coil
- (2) XLR+1/4-inch combo inputs + (2) balanced XLR line outputs
- (2) XLR thru outputs for linking
- User-selectable EQ tunings (Off, Live, DJ)
- Phase Alignment selector switch (0°/90°/180°/270°)
- Rugged, internally-braced front-ported MDF cabinet with integrated 36 mm pole socket
- Mark-resistant splatter-spray finish always looks good, even with heavy use
- Electronic clip, thermal and transducer overdrive protection
- Designed and tuned in the USA
-
Alto Professional TX310
₹41,980.00Original price was: ₹41,980.00.₹22,100.00Current price is: ₹22,100.00.Add to cartKey features
- 350 Watts peak, (175 Watts continuous Class D power)
- The 90 H x 60 V horn delivers greater coverage
- The full grille delivers style and provides protection for your investment.
- 10-inch (254 mm) LF driver, 1.5-inch (38.1 mm) voice coil
- 1-inch (25.4 mm) titanium diaphragm HF compression driver
- Lightweight, portable design for main or wedge monitor operation
- Standard speaker pole socket
- Bi-amplified design with precision active crossover and EQ
- Balanced XLR Mic/Line input, Link Output and Volume control
- Integrated analog limiter and overload protection circuitry
- Designed and tuned in the USA
-
Focal Sub6 (each)
₹171,720.00Original price was: ₹171,720.00.₹163,134.00Current price is: ₹163,134.00.Add to cartPerformance Frequency response 30Hz – 250Hz Maximum SPL 116dB SPL (peak @ 1m) Electronic section Inputs Type / Impedance Connector Sensitivity Right, left, LFE
Electronically balanced / 10 kOhmsXLR 3 points socket Adjustable Outputs (towards satellites) Type/Impedance
ConnectorRight, left
Electronically balanced / 50 Ohms
XLR 3 points plugAmplification 350W rms, BASH ® technology Signal internal treatment and functions Subwoofer section Mono right/left summation
LFE + mono low-pass
24dB / octave
Phase adjustment
Polarity selection switch
Switch high-pass filter, cut-off frequency selectionControl Adjustable subwoofer level
Low-pass cut-off frequency setting
Phase adjustment
Polarity adjustment
Subwoofer switch (mute)
2.1 “Bypass” (external remote control)
High-pass frequency selection
Releasable high-passVisualization (LED) Power On Subwoofer switch(mute) Released high-pass Power supply Local supply Connection 230V (1.6A fuse) or 115V (3.15A fuse) Removable CEI supply wire Transducers Subwoofer 11W7670, 105/8′ (27cm) Focal “W” composite sandwich cone driver Cabinetwork Construction 71/2′ (19mm) MDF panels Finish Dark red natural veneering side panels, black body Dimensions (HxLxD) 1415/16 x 139/16 x 175/16′ (380mm x 344mm x 440mm) Weight 50.7lb (23kg) -
Dynaudio 9S
₹125,990.00Original price was: ₹125,990.00.₹113,590.00Current price is: ₹113,590.00.Add to cart- 300W Powered Subwoofer
- Onboard 300-watt Class D amplifier module
- 9.5″ MSP long-throw woofer for accurate low-frequency reproduction
- Double front baffle maximizes rigidity for higher-volume listening sessions
- Frequency response: 22Hz–175Hz ±3dB
- Master/Slave feature for daisy-chaining multiple subwoofers
- Sealed-cabinet design
Reviews
There are no reviews yet.