WHAT YOU HEAR IS WHAT YOU GET
The KH 150 follows the same philosophy as all Neumann studio monitors: highest linearity, lowest distortion, no coloration, and perfect adaptability to any acoustic environment. It allows you to hear every nuance of your tracks. Mixing becomes so much faster and easier, once the guesswork is over. And more creative, too: Sounds genius, but can I get away with that? Is that vocal bright or sibilant? Is it too much bass? The KH 150 will tell you. Honestly.
ONE BIGGER
What differentiates the KH 150 from its smaller siblings is its deeper bass response down to 39 Hz. That’s almost as low as the larger KH 310, thanks to the KH 150’s novel 6.5” high-precision woofer in a carefully designed bass reflex cabinet. The KH 150 is thus ideally suited to urban music, EDM, film scoring, and all styles that require extended low end and/or elevated listening levels. Thanks to powerful amplifiers (145 W/100 W) and sophisticated protection limiters, no clarity is lost even at high SPLs. But, being a true universalist, the KH 150 works just as well for everything from rock to classical music, broadcast applications and voice-over work.
The KH 150 has an exceptionally linear frequency response from 39 Hz to 21 kHz (±3 dB). Not only that: It also linearizes the phase response! Which translates to clear mids with astonishing transparency as well as extreme accuracy in the time domain: precise impulse reproduction and finely resolved reverbs. This is made possible by DSP controlled electronics which allow for sophisticated crossovers avoiding the phase distortion caused by analog filters. The internal DSP also realizes new standards in tonal consistency. The KH 150 is made to extremely low tolerances of no more than ± 0.8 dB! And you can hear it, too: Stereo imaging is razor-sharp.
READY FOR YOUR ROOM
Even the best loudspeaker only sounds as good as the acoustic environment allows. Neumann’s Mathematically Modelled Dispersion™ (MMD™) waveguide guarantees a wide sweet spot and minimizes desk reflections. But the KH 150 goes much further: Its internal DSP allows for room calibration via Neumann’s revolutionary Automatic Monitor Alignment. MA 1 (sold separately) makes sure your DSP powered monitors are optimally adapted to the character of your room and perfectly calibrated for your listening position. Even in acoustically treated rooms, this results in a huge improvement.
Tonal compatibility with other KH line studio monitors makes it possible to use the KH 150 in mixed setups e.g. in surround/immersive setups. For flexible connectivity the KH 150 features both analog and digital inputs.
AES 67 – AUDIO OVER IP
Additionally, the KH 150 AES67 model variant offers integrated redundant AES67 audio network ports that are fully compliant with broadcast standards such as ST 2110, ST 2022-7 redundancy, and RAVENNA. At the same time, the KH 150 AES67 is compatible with DANTE®-generated AES67 network streams.
ENERGY EFFICIENT
Neumann engineers took great care to develop a patent pending amplifier technology which combines superior audio performance with the energy efficiency of Class D. Although the KH 150’s amplifiers deliver up to 145 W to the 6.5” woofer and 100 W to the 1” tweeter, they only consume 17 W at idle. Auto-standby reduces power consumption to 0.3 W when the KH 150 has not been used for a while, but can be deactivated.
MOUNTING OPTIONS
Most of the KH 120 accessories also fit the KH 150, with the exception of the LH 65 table stand, which is available in a slightly larger version in the form of the new LH 66 (Cat. No. 700258). The LH 61 (L bracket) was updated, because the KH 150 is a bit heavier/larger than the KH 120 and the LH 64 (VESA mount) was adjusted to allow access to the controls of the KH 150. The order numbers here are unchanged.
All mounting options can be found in our updated Monitor Mounting Matrix. At a later date we will also update the Monitor Accessory Finder.
The KH 150 is available in two color options, anthracite and white.
FEATURES:
- High-precision drivers, Mathematically Modelled Dispersion™ (MMD™) waveguide
- Linear frequency response 39 Hz … 21 kHz (±3 dB)
- Linear phase response 105 Hz … 16 kHz (± 45°) with latency < 2,6 ms
- DSP engine allows for room adaptive calibration via Neumann’s MA 1
- Razor-sharp imaging due to extremely low tolerances (± 0.8 dB)
- May be combined with other KH line speakers in immersive/surround setups.
You must be logged in to post a review.
Related products
-
Focal Twin6 be (each)
Original price was: ₹202,850.00.₹192,708.00Current price is: ₹192,708.00.Add to cartPerformance Frequency response 40Hz – 40kHz Maximum SPL 115dB SPL (peak @ 1m) Electronic section Inputs Type / Impedance Connector Sensitivity Electronically balanced / 10 kOhms XLR Adjustable, +4dBu or -10dBV Bass
Bass – Midrange
Treble150W rms, BASH® technology
150W rms, BASH® technology
100W rms, class ABPower supply Local supply Connection 230V (2A fuse)
115V (4A fuse)IEC inlet and detachable power cord User controls and indicators Input sensitivity selector
Midrange driver selector (right/left)
Adjustable tweeter and woofer levels by potentiometers
On/off switch, voltage selectorLight indicator Power On LED Transducers Woofer 2 x 6W4370B, 61/2′ (16.5cm) Focal “W” composite sandwich cone drivers High frequency TB871, Focal Beryllium inverted dome tweeter Shielding Integral through cancellation magnets / cans or by magnet design Cabinetwork Construction 71/2′ (19mm) MDF panels Finish Dark red natural veneering side panels, black body Dimensions (HxLxD) 913/16 x 1911/16 x 133/8′(250mm x 500mm x 340mm) Weight 30.8lb (14kg) -
Dynaudio LYD 7 (Black)
Original price was: ₹88,900.00.₹79,990.00Current price is: ₹79,990.00.Add to cart- Nearfield Monitor with 7″ Woofer
- Bi-amped speaker design with 2 x 50W and state-of-the-art Class-D amplification
- Bass extension settings to extend or curtail the low end frequency response
- Two different tunings: one for free standing and one designed for speakers within 50 cm of wall
- Sound balance to influence the overall response of the speaker
- Handmade in Denmark
-
Focal Alpha 65 Evo (each)
Original price was: ₹55,690.00.₹52,905.00Current price is: ₹52,905.00.Add to cartVERSATILE PROFESSIONAL LOUDSPEAKER Active 2-way Alpha 65 Evo has a 1” (25mm) aluminium tweeter and a 6.5” (16.5 cm) woofer with Slatefiber cone developed and manufactured in Focal’s workshops in France. This monitor features excellent dynamics and neutrality in its tonal balance. Its technologies mean that Alpha 65 Evo can guarantee excellent sonic coherence wherever …
-
Focal Trio6 Be (each)
Original price was: ₹409,905.00.₹389,409.00Current price is: ₹389,409.00.Add to cartPerformance Frequency response 3-way mode 35Hz – 40kHz (+/- 3dB) 2-way mode (Focus) 90Hz – 20kHz (+/- 3dB) Maximum SPL 3-way mode 115dB SPL (peak at 1m) 2-way mode (Focus) 105dB SPL (peak at 1m) Electronic section Inputs Type / Impedance Connector Sensitivity Electronically balanced / 10 kOhms XLR Adjustable, +4dBu or -10dBV Bass
Midrange
Treble200W, class G
150W, class G
100W, class ABPower supply Main voltage Wiring 230V (class T fuse 1.6A fuse rating) – 115V (class T fuse 3.5 A fuse rating) Detachable IEC power cable Indicators and controls Rear panel Input sensitivity selector (+4dBu/-10dBV)
Low frequency shelving (+/- 3dB from 35 to 250Hz)
High frequency shelving (+/- 3dB from 4.5 to 40kHz)
EQ low-mid frequencies (+/- 3dB at 160Hz, Q factor = 1)
FOCUS input / FOCUS outputLED Focus mode on, audio clipping and protection indicated by LED on front panel Transducers Subwoofer 8W64701 8′ Focal driver with W composite sandwich cone Woofer 5W04701 5′ Focal driver with W composite sandwich cone Tweeter TB872, 1′ Focal pure Beryllium inverted dome tweeter Cabinet Structure 22mm (0.86′) reinforced panels Finish Dark Red natural Burr-ash veneering side panels, Black body Dimensions including 4 rubber feet (HxWxD) 201/2′ x 1015/16′ x 143/16′ (520 x 278 x 360mm) Weight 44 lbs (20 kg)
Product Showcase
Reviews
There are no reviews yet.